CTL-1

NOTES: REVISIONS THIRD ANGLE PROJ. 1. INITIAL TOOL SETTING REQUIREMENTS: 3. THE DIE SETS MAY BE PURCHASED SEPARATELY (P/N PER TABLE BELOW). WITH DIES FIRMLY AFFIXED IN TOOL ON THE DIE MOUNTING SURFACES, CLOSE THE TOOL FULLY (UNTIL THE RATCHET RELEASES) WITH 25-35 LBS,HAND FORCE THE DIES MUST BE 'BUTTED' (TOUCHING BOTH FRONT & REAR SURFACES). THE RATCHET ADJUSTER WHEEL SHOULD BE POSITIONED IN THE CENTER INDENT (+/- ONE INDENT POSITION) 4. PACKAGING: A. QUANTITY: B. PACKAGE MARKING: 2. DO NOT SCALE THIS DRAWING. RATCHETING HAND TOOL WITH DIE SET DIE SET ONLY 47-10070 47-20000 47-10063 47-20245 0.042(1.07) 47-10090 47-20003 0.080(2.03) 47-10110 47-10120 47-10150 47-10160 47-10180 47-10200 47-10210 47-10220 47-10230 47-10240 47-10250 47-10260 47-10270 47-10280 47-10290 47-10300 47-10310 47-10320 47-20001 47-20002 47-20004 47-20008 47-20025 47-20024 47-20027 47-20028 47-20029 47-20030 47-20247 47-20249 47-20250 47-20251 47-20252 47-20253 47-20254 - 47-10330 47-20255 47-10350 47-20257 47-10340 CTL-1 CTL-2 CTL-3 CTL-4 CTL-5 CTL-6 CTL-8 0.151(3.83) 0.052(1.32) 0.178(4.52) 47-20029 0.190(4.82) 0.213(5.40) - 0.100(2.54) 0.429(10.90) - - 0.068(1.73) 0.178(4.52) 0.128(3.25) 0.178(4.52) 0.324(8.23) 0.429(10.90) 0.105(2.67) 0.121(3.07) 0.042(1.07) 0.068(1.73) 0.042(1.07) 0.052(1.32) 0.052(1.32) 0.041(1.04) 0.178(4.52) 0.324(8.23) 0.052(1.32) 0.105(2.67) 0.178(4.52) - 0.263(6.68) - - - - - - 0.128(3.25) 0.178(4.52) - - - - - - - - 0.178(4.52) 0.278(7.06) 0.255(6.48) 0.319(8.10) 0.255(6.48) 0.042(1.07) - 0.075(1.90) - 0.187(4.75) 0.042(1.07) 0.068(1.73) 0.255(6.48) 0.075(1.90) 0.128(3.25) 0.151(3.84) 0.213(5.41) 0.255(6.48) 0.324(8.23) 0.068(1.73) 0.213(5.41) 0.075(1.90) 0.075(1.90) - - - 0.324(8.23) 0.042(1.07) 0.178(4.52) 0.278(7.06) REFERENCE EAR# 6228 CONFIGURATION LEVEL: In Work - - - - 0.255(6.48) DRAWN CLEMENT 0.118 WAS 0.116 FOR 47-10210 06-Aug-18 08786 EH DIE SET 47-20253 SHOWN 34.00(1.340) 34.00(1.340) 34.00(1.340) 34.00(1.340) 40.00(1.575) - - - - - 34.00(1.340) HANDLE - 34.00(1.340) 34.00(1.340) 34.00(1.340) - CUSTOMER OUTLINE DRAWING 34.00(1.340) 40.00(1.575) DATE 12-Feb-13 ENGINEER B.C.GLEISSNER DATE 21-Sep-14 APPROVED K.CAPOZZI DATE 06-Aug-18 CAD FILE K 34.00(1.340) 34.00(1.340) - CL 34.00(1.340) 34.00(1.340) - 8107 34.00(1.340) - - 14-May-18 34.00(1.340) - - 47-10310, 47-10320, 47-10330, 47-10340, 47-10350 ADDED & CTL-1,CTL-2,CTL-3,CTL-5, CTL-6,CTL-9 PART NUMBERS UPDATED WITH DIE SET SIZES. 34.00(1.340) - - 0.068(1.73) J BMG 34.00(1.340) 34.00(1.340) - CL/BCG 5801 42.00(1.655) - - 2809 16-Aug-17 34.00(1.340) 40.00(1.575) 0.042(1.07) FINISH - 05-Dec-14 34.00(1.340) 0.324(8.23) 0.187(4.75) NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. - RELEASE TO MFG. 34.00(1.340) 0.255(6.48) 0.151(3.84) MATERIAL - CONSOLIDATION OF 47-10XXX AND CTL-XX DRAWINGS 34.00(1.340) 0.068(1.73) 0.128(3.25) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: