DL3057-4A

MS/Standard DL-Class Pre-Earth type Amphenol Amphenol MIL-C-5015 Connectors DL Series R Pre-earth type DL Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying European safety standards and UL standards. They feature IP67 class water and dust proof, when mated and a protective earth circuit with first mate break grounding contacts. They are ideal for use in machine tools, robots, and other industrial machines. ermatable with MS connector. Shells: Box mounting Receptacle Shell components are fabricated from high grade aluminum alloy. Electrically zinc plate finish with an black chromate after treatment offers corrosion resistance. Consult Amphenol Daeshin for other plating options. Contacts: Pins and sockets are machined from copper alloy with silver plated finish. Size 16 and 12 socket incorporate a closed entry design. Insulators: Front inserts are Silicone rubber and Rear inserts are PPS resin for box mount receptacle only. and also straight & right angle plug's insert is PPS resin. Straight Plug Right Angle Plug 58 Amphenol Amphenol MIL-C-5015 Connectors DL3102A R Box mounting receptacle F I GASKET 4 Holes G 12.7Max B A D C DL3102A box mounting receptacles are used on boxes and equipment cases where no cable support is required. (mm) D E ±0.2 øF +0.25 -0.12 14.28 23.5 3.05 16 5/8-24 NEF 19.05 28.0 3.05 25 1 1/8-18 NEF 2.7 19.05 30.0 3.05 30 1 1/4-18 NEF 2.7 19.05 30.8 3.05 33 1 3/8-18 NEF 34.93 2.7 20.63 32.4 3.73 36 1 1/2-18 NEF 44.45 34.93 2.7 20.63 32.4 3.73 36 1 1/2-18 NEF 57.05 44.45 3.9 22.5 33.9 4.4 48 2-18 NS Shell Size □A ±0.79 □B ±0.12 C ±0.3 10SL 25.40 18.26 2.1 18 34.93 26.97 2.7 20 38.10 29.36 22 41.28 31.75 24 44.45 24-10(G)* 32 +0.79 -0.00 øG Max I Thread-2A (UNEF) * Attention:No grounding pin in DL3102A24-10P(G) 59 Amphenol Amphenol MIL-C-5015 Connectors DL3106A R Straight Plug J I A E D B C DL3106A straight plugs are used with 3102 receptacles. Shell Size øA +0.00 -0.38 10SL 18 I Thread-2B (UNEF) J Thread-2A (UNEF) 6.8 5/8-24 NEF 5/8-24 NEF 15.0 1 1/8-18 NEF 1-20 NEF 17.0 1 1/4-18 NEF 1 3/16-18 NEF 11.0 17.0 1 1/4-18 NEF 1 3/16-18 NEF 11.5 19.8 1 1/2-18 NEF 1 7/16-18 NEF 71.8 11.5 19.8 1 1/2-18 NEF 1 7/16-18 NEF 73.0 10.5 27.0 2-18 NS 1 3/4-18 NS Max C Max D Min 11.33 24.61 44.2 10.0 23.62 34.13 58.3 11.5 20 26.27 37.31 60.0 11.0 22 29.85 40.48 67.6 24 33.02 43.66 71.8 24-10(G)* 33.02 43.66 32 44.9 57.00 øB * Attention:No grounding pin in DL3102A24-10P(G) 60 (mm) E Max Amphenol Amphenol MIL-C-5015 Connectors DL3108A R Right Angle Plug B I A D J E C DL3108A Right angle plugs have a solid endbell and are used where wire must be brought at an abrupt angle. (mm) Shell Size øA +0.00 -0.38 10SL 11.33 24.61 44.0 24.0 18 23.62 34.13 65.0 30.01 20 26.27 37.31 74.2 32.01 22 29.85 40.48 73.0 24 33.02 43.66 82.0 24-10(G)* 33.02 43.66 32 44.9 57.00 øB Max I Thread-2B (UNEF) J Thread-2A (UNEF) 6.8 5/8-24 NEF 5/8-24 NEF 5.0 1 1/8-18 NEF 1-20 NEF 7.0 1 1/4-18 NEF 1 3/16-18 NEF 32.01 7.0 1 3/8-18 NEF 1 3/16-18 NEF 38.21 9.8 1 1/2-18 NEF 1 7/16-18 NEF 82.0 38.21 9.8 1 1/2-18 NEF 1 7/16-18 NEF 91.0 44.5 27.0 2-18 NS 1 3/4-18 NS C Max D Max E Max * Attention:No grounding pin in DL3102A24-10P(G) 61 Amphenol Amphenol MIL-C-5015 Connectors DL Series R Insert Arrangements Contact Arrangement Service Rating Total Contacts 10SL-3 18-10 18-12 20-15 22-22 24-10 32-17 A A A A A A D 3 4 6 7 4 7 4 Alternate Position-Degrees Contact Size 0 4 8 12 16 W X 3 80 80 80 45 120 110 110 4 6 7 4 7 4 Y Z 240 250 250 Contact Arrangement Front of Socket Insert 10SL-3 18-10 18-12 20-15 Service Rating A A A A Number of Contacts 3 4 6 7 Contact Size 16 12 16 12 Insert Arrangement 22-22 24-10 32-17 A A D Number of Contacts 4 7 4 Contact Size 8 8 4 Insert Arrangement Service Rating 62 280 280 280 280 Amphenol Amphenol MIL-C-5015 Connectors DL Series R Accessories Dimension Cable Clamp DL3057 (mm) I A C B Part Number Size øA B øC D I Thread-2B 5/8-24 NEF DL3057-4A 10SL 6.0 20.3 23.3 53.3 DL3057-10A 18 14.0 23.6 32.2 54.4 1-20 NEF DL3057-12A 20,22 15.9 23.6 37.8 57.3 1 3/16-18 NEF DL3057-16A 24 18.0 26.0 43.4 56.4 1 7/16-18 NEF DL3057 style cable clamp was designed for use with jacketed cable or wire protected by tubing. Both clamping halves float maximum strain relief. for unjacketed cable or wires, use corresponding DL3420 telescoping busing. To order clamp without busing, add -1 to the P/N. D Telescoping Bushing DL3420 (mm) C B A D Part Number Size øA Max øB Max øC D DL3420-4 10SL 6.0 7.7 12.0 47.5 DL3420-10 18 14.0 15.6 20.7 52.2 DL3420-12 20,22 15.9 18.8 24.5 52.3 DL3420-16 24 18.0 23.6 30.0 56.0 Telescoping grand bushings (used with 3057 clamp) keep dirt, oil and moisture out of endbell. Taping or wrapping wires is eliminated since bushing protects wires going thru clamp. Combinations of bushing may be used to decrease cable entry diameter to improve sealing. Characterics & Electrical data Current Rating Wire Range Voltage Rating Operating Temperature (mm) Contact Size #16 #12 #8 #4 Max.value 13A 23A 46A 80A A.W.G #20 ~ #16 #14 ~ #12 #10 ~ #8 #6 ~ #4 AC(r.m.s) 200V 250V 250V 250V DC 350V 500V 500V 500V -40°C to +125°C 63 Amphenol Amphenol MIL-C-5015 Connectors DL-Series, Pre-Earth type R How to order MIL-C-5015 (Solder Contacts) DL 1 3102A 32 2 3 17 P XXX 4 5 6 1. Connector Type DL - designates 2. Connector Style 3102A - box mounting receptacle 3106A - straight plug 3108A - 90° Right angle plug 3, 4. Shell size and insert arrangement - see tables, pages 62 5. Contact Types P - designates pin contact, (+) Male S - designates socket contact, (-) Female 6. Plating information No suffix - Olive Drab Zinc C1 - Cobalt (Without +6 Cr) 621 - Black Zinc 689 - Electro-less Nickel 64 Amphenol Military standard connectors Bayonet coupling connectors High tension connectors Amphenol Amphenol Daeshin 588 Songnae-dong, Sosa-Gu, Bucheon-City, Kyunggi-Do, Korea Phone:82-32-610-3800 Fax:82-32-673-2507 www.amphenol.co.kr Information mail : info@amphenol.co.kr Amphenol Daeshin Korea ADS-2008