EC4-10-ETO

SGX Europe Sp. z o.o. Building 11 Ligocka St. 103, 40-568 Katowice, Poland T: +48 (0) 32 438 4778 E: sales.is@sgxsensortech.com www.sgxsensortech.com EC4-10-ETO Industrial Ethylene Oxide Sensor (Application : Portable Gas Detectors) PERFORMANCE 0 – 10 ppm Range Sensitivity 1.9 ± 0.8 µA/ppm Zero in Air at 20°C -0.2 to 2.5 µA 0 to 2 ppm equivalent Baseline Drift 0.1 ppm Resolution Linearity OUTLINE All Dimensions are in mm All tolerances are ±0.2mm Linear Across Range < 120 seconds Response time (T90) < 2% signal/month Long-term Output Drift 2 years Warranty + 300mV Bias OPERATING CONDITIONS Temperature Range -20°C to +50°C Operating Humidity 15 – 90% RH (non-condensing) 90 to 110 kPa Pressure range Operating Circuit See Application Note 2 Recommended Storage Temperature Storage life 0°C to 20°C 6 months in original packing (0 – 25°C) 3 years Expected Operating Life PHYSICAL CHARACTERISTICS Weight Orientation Sensitivity Dimensions 5g None See Outline ____________________________________________________________________________________________ Whilst SGX has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use thereof and also reserves the right to change the specification of goods without notice. SGX accepts no liability beyond the set out in its standard conditions of sale in respect of infringement of third party patents arising from the use of SGX products in accordance with information contained herein. In case of modification of the product, SGX disclaims all liability. SGX Europe sp .z o.o. Poland REGON: 362332227 DS-0201, Issue 2, 28-July-2016, Page 1 SGX Europe Sp. z o.o. Building 11 Ligocka St. 103, 40-568 Katowice, Poland T: +48 (0) 32 438 4778 E: sales.is@sgxsensortech.com www.sgxsensortech.com CROSS-SENSITIVITY DATA GAS RANGE (ppm) Ethylene Oxide 10 1.0 Carbon Monoxide 100 2.5 Ethanol 30 0.8 Methanol 10 0.3 Isopropanol 50 1.3 Formaldehyde 10 0.4 i-Butylene 30 0.9 Butadiene 10 0.3 Ethylene 30 0.7 Propene 30 0.8 Vinyl Chloride 30 1.3 Vinyl Acetate 30 0.5 Formic Acid 50 1.4 Acrylonitrile 100 2.5 CORRECTION FACTOR TO ETO * * See Important Notes IMPORTANT NOTES 1.) Do not solder to the connector pins as this may damage the sensor and thereby invalidate the warranty. 2.) Details on recommended connector pins can be found in the Frequently Asked Questions within the Gas Sensor section of the SGX website. 3.) All performance specifications are based upon the following environmental conditions: 20°C, 50% relative humidity, 101kPa. 4.) Cross Sensitivity Data is for information only. Calibration is recommended with target gas as the accuracy of calibration and measurement cannot be ensured. 5.) Correction Factor of ETO = Sensitivity of ETO / Sensitivity of test gas. 6.) The cross sensitivities are including but not limited to the gases stated in the table. It may respond to other gases. 7.) The cross sensitivities may fluctuate between ± 30% and may differ from batch to batch or across sensor’s life time. 8.) The device is designed to be RoHS compliant. _____________________________________________________________________________________________ © SGX Sensortech 2016 Document subject to disclaimer on page 1 DS-0201, Issue 2, 28-July-2016, Page 2 SGX Europe Sp. z o.o. Building 11 Ligocka St. 103, 40-568 Katowice, Poland T: +48 (0) 32 438 4778 E: sales.is@sgxsensortech.com www.sgxsensortech.com TEMPERATURE PERFORMANCE _____________________________________________________________________________________________ © SGX Sensortech 2016 Document subject to disclaimer on page 1 DS-0201, Issue 2, 28-July-2016, Page 3