物料型号:
- Type DC95:环氧树脂涂层的可互换NTC热敏电阻芯片,带有裸露的镀锡铜引线。
- Type EC95:环氧树脂涂层的可互换NTC热敏电阻芯片,带有裸露的镀锡180合金引线。
- Type TK95:环氧树脂涂层的可互换NTC热敏电阻芯片,带有PTFE/PFA绝缘的镍引线。
器件简介:
- 这些热敏电阻是精密的固态温度传感器,具有高灵敏度和高可靠性,适用于-112°F至302°F的温度范围,适用于温度测量、控制和补偿。
引脚分配:
- DC95:直径0.012英寸(0.3mm)的热敏电阻芯片,带有裸露的镀锡铜引线。
- EC95:直径0.008英寸(0.2mm)的热敏电阻芯片,带有裸露的镀锡Cu-Ni合金引线。
- TK95:直径0.010英寸(0.25mm)的热敏电阻芯片,带有PTFE/PFA绝缘的Cu-Ni合金引线。
参数特性:
- 热敏电阻具有不同的电阻值范围(1000Ω至100kΩ)和不同的公差或范围选项。
- 热耗散常数和热时间常数在静止空气中分别为1mW/°C和10秒,在搅拌油中分别为8mW/°C和1秒。
- 最大功率在77°F(25°C)时为75mW,并随温度升高而降低。
功能详解:
- 热敏电阻适用于多种温度范围和精度要求,具有多种标准电阻-温度(R-T)曲线可供选择。
应用信息:
- 热敏电阻适用于需要高精度和高可靠性的温度测量和控制系统。
封装信息:
- 热敏电阻采用树脂涂层以增强机械强度和耐溶剂性,具有坚固的构造。
注意:
- 对于符合RoHS要求的产品,请在零件标签后添加后缀“N”或“H”。