ELLH10130

product details page .400" (10.16mm) 10.0mm (.394") ELL Page 1 of 1 Plugs and Headers Available Configurations The plugs and headers available in the ELL series are listed below right. All are supplied in both .400" and 10.0mm spacing, in 2 through 12 positions. See the Part Number Guide on this page for ordering information. ELLH Pin Headers Vertical and horizontal orientation, closed and open sides ELLP Plugs Wire entry parallel to board and contact. ELLT Plugs Top or bottom wire entry perpendicular to board and contact. ELLF Plugs Wire insertion and screw actuation from the front of the block, facilitating installation. ELLK Plugs 45° wire entry angle provides optimal installation and application flexibility. Options and Variations The same options and variations offered with the ELF are also available in the ELL line: z z z z z z High-temperature SMT Compatibility Choice of Black or Green Selective Gold Plating Mounting Ears Ejector Ear Headers Marking/Label The .400"/10.0mm ELL product line is a doublespaced version of Amphenol Pcd’s broad family of .200"/5.0mm ELF plugs and headers, offering a higher voltage rating—600Vrms—and the same range of configurations and accessories as the ELF line shown on pages 22 and 23. SPECIFICATIONS: Dielectric Withstanding: 3000V Current Rating: 15A Operating Voltage: 600V Insulation Resistance: 105 Megohms Wire Pullout Force (Plug): Per UL 486E, Section 14 MATERIALS: Housing: PPO, UL 94V-0, Black or green Contact: Copper alloy, optional finish Clamp Screw: Steel, nickel finish Wire clamp: Copper alloy, nickel finish HEADER INSTALLATION: Hole Diameter: .055" min. PLUG INSTALLATION: Wire Range: 12-26 AWG Wire Strip Length: .310" (14-26 AWG), 490" (12 AWG, ELLF only) Recommended Tightening Torque: 7 lb-in. (0.79Nm) APPROVALS: http://www.amphenolpcd.com/details/pluggable_plugs/.400_inches/ell.htm 7/1/2011