ELMM20120

ELMM Low-Profile, Angled Modular Terminal Block .200" (5.08mm) ELMM Angled High Board Density The angled .200" (5.08mm) low pr ofile ELMM series incorporates a 45° angle to maximize use of space by allowing terminal blocks to be stacked front-to-back, providing users full access to wires and screws even when the blocks are fully wired. The angled wire entr y also facilitates training of wires in the desired direc tion. Blocks feature moving cage clamp termination. Modular Construction The terminal blocks are molded as 2to 10-position modules with interlocking dovetails and can be assembled to length without loss of pin spacing. Longer connectors are readily assembled from modules. Users can purchase modules or assemblies to specific size, or stock a limited number of smaller modules and assemble in-house to suit requirements. Options and Variations Terminations are available in black or green. Contact Amphenol Pcd for information on marking and other application-specific variations. APPROVALS: Amphenol Pcd 64 Pos Catalog # Black Catalog # Green L ( In.) ELMM Modules 2 ELMM02100 ELMM02120 .40 3 ELMM03100 ELMM03120 .60 4 ELMM04100 ELMM04120 .80 5 ELMM05100 ELMM05120 1.00 6 ELMM06100 ELMM06120 1.20 7 ELMM07100 ELMM07120 1.40 8 ELMM08100 ELMM08120 1.60 9 ELMM09100 ELMM09120 1.80 10 ELMM10100 ELMM10120 2.00 11 ELMM11100 ELMM11120 2.20 12 ELMM12100 ELMM12120 2.40 13 ELMM13100 ELMM13120 2.60 14 ELMM14100 ELMM14120 2.80 15 ELMM15100 ELMM15120 3.00 16 ELMM16100 ELMM16120 3.20 17 ELMM17100 ELMM17120 3.40 18 ELMM18100 ELMM18120 3.60 19 ELMM19100 ELMM19120 3.80 20 ELMM20100 ELMM20120 4.00 ELMM Assemblies SPECIFICA TIONS: MATERIALS: Current Rating: 10A Operating Voltage: 300V Insulation Resistance: 103 Megohms Dielectric Withstanding: 1600V Wire Pullout Force: Per UL 486E, Section 14 Housing: PBT, UL 94V-0, black or green Contact: Brass, tin-lead finish Clamp Screw: Copper alloy, nickel finish Wire clamp: Copper alloy, nickel finish INSTALLATION: Wire Range: 16-28 AWG Wire Strip Length: .250" Recommended Tightening Torque: 7 lb-in. (0.79N-m) Hole diameter: .055" min. Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • info@amphenolpcd.com