2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page cov3
2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page cov4
Amphenol
®
The Company
Amphenol Canada Corp. a subsidiary of Amphenol Corporation,
is an international leader in the manufacture of Filtered
Connectors and Specialty Interconnect Devices, and has been
pioneering EMI and EMP technologies for more than 40 years.
Located in Toronto, Canada, our ISO 9001 certified facility
employs approximately 400 people. Our activities are dedicated
to the design, development and manufacture of EMI/EMP filter
connector products which are used in Commercial, Industrial,
Communications, Military and Aerospace applications worldwide. Our expertise in understanding and supporting our customers’ filter interconnect needs has earned Amphenol Canada a
reputation of quality and excellence among the world’s leading
users of electronic components.
What is a Filtered Connector?
A filtered connector is the combination of filter elements in a
connector, forming one neat, compact interconnect device that
can filter unwanted EMI. The most popular configuration is when
capacitors are mounted inside the connector between each of
the contacts and the connector ground shell.
Benefits
Better EMI Control – With minimized lead inductances and
short, direct paths to ground of the filter, performance
will typically out perform the same filter components on
a P.C.B. by a factor of three to one.
PCB Space Savings – Incorporating filter elements into the
connector, enables simplification of the required filter
schematic for the necessary performance plus a savings
of 2-4 square inches.
Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled
or tested. Fewer components means greater reliability at
lower cost.
Easy EMI/RFI Upgrade – These compact filtered connectors
fit standard non-filtered connector footprints. For
improved EMC performance, simply replace the existing
connector with a filtered connector.
EMC Compliance & Immunity – EMI that is generated
from the electronic device, radiated or conducted, will
be re-directed to chassis ground through the connector
shell. This same device will also protect the system from
external EMI/RFI noise (such as radio transmitters, ESD,
or natural phenomena such as lightning) in the same way.
Choosing the Right Capacitance for Your Filter Connector
(1) Determine the highest frequency that the filter connector
needs to pass unaffected.
(2) Which frequencies are causing trouble, either with
emissions or with immunity to interference?
(3) Scan the Insertion Loss charts on page 2 to select a filter
which provides little or no insertion loss (filtering) at the
frequency determined from step 1, yet gives the greatest
possible insertion loss at the frequencies determined in step 2.
Nominal Insertion Loss values described in this catalog are
based on the Mil-STD-220 test method - a 50 ohm balanced load
and source impedance. Different systems will differ from this and
hence, the filter connector may perform differently.
The final decision will be determined from actual EMI/RFI
testing of the equipment in question.
2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page 1
Contents
D–Sub Series
FCC17 Series Electrical Data, Insertion Loss Performance
Mechanical and Environmental Data
Filtered Stacked D-Sub Connectors
Filtered D-Sub Connectors: How To Order
Filtered Combo D-Sub Connectors
2
3
4
5-10
11-16
Micro–Ribbon Series
FCC57 Series Electrical Data, Insertion Loss Performance
2
3
Mechanical and Environmental Data
Filtered Micro-Ribbon Connectors: How To Order
17-22
RF Series
456 Series Capacitively Decoupled RF Connectors
23-35
Modular Jacks
FRJ / FRJA Series Filtered & Shielded See Modular Jack Catalogue
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
1
2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page 2
FCC17 & FCC57 Series
ELECTRICAL DATA
Contact Resistance:
15 milliohms maximum per MIL-STD-1344 Method 3002
Insulation Resistance: 3000 megohms minimum per MIL-STD-1344 Method 3003.1
Current Rating:
5 Amps DC maximum
2 Amps RF filtering maximum
FCC17 Combo:
20-40 Amps
Filter Performance:
Filter Capacitance (pF)
@25°C, 1 kHz, 1.0 VRMS
Dielectric Material: NPO or X7R
Insertion Loss (dB)
(per MIL-STD-220 @
.5 MHz
25°C)
1 MHz
5 MHz
10 MHz
50 MHz
100 MHz
200 MHz
1000 MHz
Working Voltage (VDC)
DWV (VDC) *
50
± 15%
2
12
32
300
600
180
± 15%
4
12
27
32
300
600
330
± 15%
1
7
15
28
32
300
600
470
± 15%
820
± 15%
1
2
11
22
30
32
300
600
1000
± 15%
1
3
16
30
32
32
200
600
1200
± 15%
2200
± 15%
5600
± 20%
1
4
17
30
32
32
200
600
1
5
8
23
32
32
32
200
600
3
5
11
16
32
32
32
32
200
600
1
3
16
30
32
32
200
600
47000
± 20%
15
20
27
32
32
32
32
32
50
150
NOTE: A larger range of capacitors available - consult factory.
* FCC57 connectors can be specified to meet the requirements of FCC Docket 20780, Part 68, Subpart F (1000 VAC for one minute. Consult factory for details).
FCC17 and FCC57 connectors can withstand a transient voltage spike of 700 V with a rise time of 1 µsec (500 V for 47000 pF).
FCC17 and FCC57 connectors can be specified to meet higher DWV and transient voltage requirement (consult factory).
40
30
30
20
10
Insertion Loss (dB)
0
0.1
1.0
10
100
20
10
0
1000
10
50 pF - 470 pF
820 pF - 1000 pF
30
30
20
10
1.0
1.0
Frequency (MHz)
40
0.1
0.1
Frequency (MHz)
40
0
2
Insertion Loss (dB)
40
Insertion Loss (dB)
Insertion Loss (dB)
Typical Insertion Loss Performance (dB)(Per MIL-STD-220, no load)
10
100
1000
100
1000
100
1000
20
10
0
0.1
1.0
10
Frequency (MHz)
Frequency (MHz)
1,200 pF - 2,200 pF
5,600 pF - 47,000 pF
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page 3
FCC17 & FCC57 Series
MECHANICAL DATA
FCC17 Series Construction
Stamped steel
shell plated
per MIL-T-10727
Low impedance
chip capacitor
Gold plated
phosphor
bronze contact
with integral
High strength
contact spring thermoplastic
insert
Mounting hole
(threaded or
through hole)
Board lock
device
FCC17 & FCC57 Mechanical & Environmental Data
ENVIRONMENTAL
MATERIALS
FCC17
Shell
Stamped Steel;
Tin Plated
Contacts Phosphor Bronze;
15µ inches
[0.38 microns]
Au over Ni
Optional 50µ inches
[1.27 microns]
Au available
FCC57
Shell
Stamped Steel,
Zinc or Aluminum
Diecast; Tin Plated
Contacts Phosphor Bronze;
30µ inches
[0.76 microns]
Au over Ni
Optional 50µ inches
[1.27 microns]
Au available
FCC17 Combo
Copper Alloy
30µ inches
[0.76 microns]
Au over Ni
Inserts
High Strength
Thermoplastic.
Complies with UL
flammability
requirements of
94V-O per UL-STD-94.
FCC17 & FCC57
OPERATING TEMPERATURE • -40°C to +85°C
TEMPERATURE CYCLING
• To MIL-STD-1344,
Method 1003, Test Cond. A
HUMIDITY
• To MIL-STD-1344,
Method 1002, Type I,
Test Condition C
VIBRATION
• To MIL-STD-1344,
Method 2005, Test Cond. III
DURABILITY
• 200 Cycles Minimum,
to MIL-STD-1344,
Method 2016
UL File #
CSA File #
Inserts
E135615
LR68598
High Strength
Thermoplastic.
Complies with UL
flammability
requirements of
94V-O per UL-STD-94.
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
3
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 4
FCC17 Series
FILTERED STACKED D-SUB CONNECTORS
Ordering Information – Stacked D-Sub
FCC17 – 2 BP BS –
4 5
5 X
FCC17 SERIES DESIGNATION
2
BP
VERTICAL MOUNTING DIMENSION
BETWEEN CONNECTORS
1 = .625" [15.88 mm]
2 = .750" [19.05 mm]
UPPER CONNECTOR CONFIGURATION
(Size and Style)
EP: 9 pin
BP: 25 pin
ES: 9 socket BS: 25 socket
AP: 15 pin
CP: 37 pin
AS: 15 socket CS: 37 socket
BS
LOWER CONNECTOR CONFIGURATION
(Size and Style) same as Upper Connector
Configuration
4
MOUNTING
2: .120" [3.05 mm] Diameter Through Hole
on Flanges
4: 4-40 Threaded Inserts on Flanges
E: 4-40 Hex Jack Sockets (supplied loose)
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
MODIFIER
0: Standard Product
x: Special or Custom Versions
X
LOWER CONNECTOR FILTER CAPACITANCE
same as Upper Connector Filter
Capacitance Designation
5
UPPER CONNECTOR FILTER CAPACITANCE
D: 50 pF
5:
1,000 pF
0:
180 pF
E:
2,200 pF
F:
330 pF
7:
1,200 pf
1:
470 pF
9:
5,600 pF
4:
820 pF
8:
47,000 pF
5
4–40 THREADS
OR .120” DIAMETER
THROUGH HOLE
Dimensions
Connector size
A
B
9/9
1.213 [30.81]
.984 [24.99]
15 / 15
1.541 [39.14]
1.312 [33.32]
25 / 25
2.088 [53.04]
1.852 [47.04]
37 / 37
2.729 [69.32]
2.500 [63.50]
Consult factory for alternative arrangements
PCB LAYOUT
4
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
C
.432 [10.97]
.756 [19.20]
1.304 [33.12]
1.956 [49.68]
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 5
FCC17 Series
FILTERED D-SUB CONNECTORS
Specifications
Filter Characteristics:
Electrical Data:
Material and Finishes:
Environmental Data:
UL File # :
CSA File # :
See Page 2
See Page 2
See Page 3
See Page 3
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information – D-Sub
FCC17 – B25 S C –
4 4 0 G
FCC17 SERIES DESIGNATION
B25 SIZE
E09
A15
B25
C37
S CONNECTOR TYPE
A - Adapter
P - Pin
S - Socket
C TERMINATION TYPE
A - Right Angle PC Tail, .318" [8.08 mm] Footprint
B - Right Angle PC Tail, .405" [10.29 mm] Footprint
C - Right Angle PC Tail, .590" [14.99 mm] Footprint
D - Pin/Socket Adapter
E - Vertical Mount PC Tail
M - Solder Cup
N - Vertical Mount PC Tail - Long Body
4
MOUNTING OPTIONS*
A: 4-40 Threaded PC Tail Standoffs
with Boardlock, Vertical Mount Only
E: 4-40 Hex Jack Sockets (supplied loose)
F: 4-40 Round Fixed Jack Sockets
2: .120 [3.05 mm] diameter Through hole
3: Self-Locking 4-40 Threaded Inserts
4: 4-40 Threaded Inserts (Standard)
5: 4-40 Threaded Stand-Offs, Vertical Mount
6: M3 Threaded inserts
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
SPECIALS
No Digit: Standard 15µ inches gold
G:
50 micro inches gold
K:
30 micro inches gold
L:
Standard Connector with added
ferrite block
G
MODIFIER
0 = Standard Product (Boardlocks
on Right Angle D-Subs)
B = Metal Mounting Brackets,
for Right Angle D-Subs
D = .315” to Boardlock for .590” footprint
E = Plastic Bracket - No Boardlock
F = No Boardlock, No plastic or metal
Bracket - Alignment Strip Only
X = Specials or Custom Versions
0
FILTER CAPACITANCE [pF]*
D: 50
pF
B: 100 pF
0: 180 pF
F: 330 pF
1: 470 pF
4: 820 pF
5: 1,000 pF
7: 1,200 pF
E: 2,200 pF
9: 5,600 pF
8: 47,000 pF
4
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
5
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 6
FCC17 Series
FILTERED D-SUB CONNECTORS
Pin
Socket
FRONT VIEW
END VIEW
FRONT VIEW
All Dimensions in Inches (mm)
Shell
Size
E
A
B
C
Standard
Number of
Contacts
9
15
25
37
A
B
1.213 [30.81]
1.541 [39.14]
2.088 [53.04]
2.729 [69.32]
.984 [24.99]
1.312 [33.32]
1.852 [47.04]
2.500 [63.50]
C
(for pin
connector)
.666 [16.92]
.994 [25.25]
1.534 [38.96]
2.182 [55.42]
D
(for socket
connector)
.643 [16.33]
.971 [24.66]
1.511 [38.38]
2.159 [54.84]
Mounting Dimensions
FRONT MOUNTING CUT-OUT
Size
9
15
25
37
6
REAR MOUNTING CUT-OUT
Mounting
Front
Rear
Front
Rear
Front
Rear
Front
Rear
A
.875 [22.23]
.807 [20.50]
1.200 [30.48]
1.134 [28.80]
1.744 [44.30]
1.673 [42.49]
2.389 [60.68]
2.326 [59.08]
B
.984 [24.99]
.984 [24.99]
1.312 [33.32]
1.312 [33.32]
1.852 [47.04]
1.852 [47.04]
2.500 [63.50]
2.500 [63.50]
C
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
END VIEW
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 7
FCC17 Series
FILTERED D-SUB CONNECTORS
Vertical Mount
Termination Type E
Termination Type N
Right Angle, with Boardlocks & Plastic Mounting Brackets
.318" FOOTPRINT
Termination Type A
with Modifier option O
.405" FOOTPRINT
.590" FOOTPRINT
Termination Type B
with Modifier option O
Termination Type C
with Modifier option O
Right Angle, with Metal Mounting Brackets
.318" FOOTPRINT
Termination Type A
with Modifier option B
.405" FOOTPRINT
Termination Type B
with Modifier option B
.590" FOOTPRINT
Termination Type C
with Modifier option B
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
7
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 8
FCC17 Series
FILTERED D-SUB CONNECTORS
Solder Cup Termination
Termination type M
SIDE VIEW
END VIEW
SOLDER CUP DETAIL
(ACCEPTS UP TO 20 AWG WIRE)
Pin-to-Socket Adapter
Termination type D
Mounting Options
Through Hole with Mounting Post
4-40 Threaded Inserts
Part No. Example
FCC17-B25AD-2x0
FCC17-B25AD-4x0
x = To complete the P/N, see page 5 to assign Filter Capacitance Code.
For electrical and mechanical specifications, see pages 2 and 3.
8
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 9
FCC17 Series
FILTERED D-SUB CONNECTORS
Mounting Options (on Flange)
Shown for Vertical Mount Connectors. Codes 2, 3, 4, 6, E and F also available on right angle connectors.
-Axx
4-40 Threaded Standoffs with
Boardlocks (Vertical Mount only)
Mounting code A
-2xx
.120" (3.05 mm) diameter thru hole
Mounting code 2
-3xx, 4xx and 6xx
4-40 Threaded Inserts - Self locking
4-40 Threaded inserts (standard)
M3 threaded inserts
Mounting codes 3, 4 and 6
-Exx
4-40 Hex Jack Sockets (supplied loose)
Mounting code E
-Fxx
4-40 Round fixed Jack Sockets
Mounting code F
-5xx
4-40 Threaded Standoff (vertical mount only)
Mounting code 5
Bracket Options & Specials
-xxD
.315” to Boardlock
for .590” Footprint only
Modifier option D
-xxE
Plastic bracket only
Modifier option E
Termination
Type
A
B
C
-xxF
Alignment Strip Only
No bracket or boardlocks
Modifier option F
“A”
Dimension
.318 (8.08)
.405 (10.29)
.590 (14.99)
FERRITE
Consult Factory for details
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
9
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 10
FCC17 Series
FILTERED D-SUB CONNECTORS
PCB Layout
9 SIZE
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
15 SIZE
25 SIZE
Standard PCB layout
PCB layout for
.590" footprint with Modifier
Options B or D only
37 SIZE
Standard PCB layout
10
PCB layout for
.590" footprint with Modifier
Options B or D only
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:49 AM
Page 11
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
Specifications
Filter Characteristics:
Electrical Data:
Material and Finishes:
Environmental Data:
UL File # :
CSA File # :
See Page 2
See Page 2
See Page 3
See Page 3
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information – Combo D-Sub
FCC17 – A 3W3 P M – 4
5 0 G
FCC17 SERIES DESIGNATION
A
3W3
P
M
4
SHELL SIZE
A, B, C, D, E
ARRANGEMENT
See page 12
CONNECTOR TYPE
A = Adapter
P = Pin
S = Socket
TERMINATION TYPE
D = Pin/Socket Adapter
E = Power PC Tail – 40A - .126" Dia., .175" Lg.
K = Power Solder Cup – 10A – Wire Size 16
L = Power Solder Cup – 20A – Wire Size 12
M = Power Solder Cup – 40A – Wire Size 8
R = Power Press Fit – 20A - .145" Lg. - .126" Dia. Hole
MOUNTING OPTIONS
4
2 = .120" dia. mounting holes
3 = 4-40 Threads Self locking
4 = 4-40 Threads
5 = 4-40 Standoffs - PC tail only
6 = M3 Threads
E = 4-40 Hex Jack Sockets [supplied loose]
PLATING OPTION
Blank = Standard 30 microinches gold
G = 50 microinches gold
G
MODIFIER 0
0 = Standard
X = Specials or Custom versions
[Consult Factory]
0
FILTER CAPACITANCE (pF)
D: 50
pF
B: 100 pF
O: 180 pF
F:
330 pF
I:
470 pF
4:
820 pF
5:
1000 pF
7:
1200 pF
E: 2200 pF
9:
5600 pF
8:
47000 pF
5
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
11
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 12
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
Insert Arrangements - Male Front View
Shell Size E
Arrangement 2W2
No. of Signal Contacts 0
No. of Power Contacts 2
Shell Size A
Arrangement 3W3
No. of Signal Contacts 0
No. of Power Contacts 3
Shell Size B
Arrangement 5W5
No. of Signal Contacts 0
No. of Power Contacts 5
Consult factory
for availability
Keyed Version
also available
Consult factory
for availability
Keyed Version
also available
Consult factory
for availability
Shell Size B
Arrangement 9W4
No. of Signal Contacts 5
No. of Power Contacts 4
Consult factory
for availability
Shell Size B
Arrangement 13W3
No. of Signal Contacts 10
No. of Power Contacts 3
Shell Size B
Arrangement 17W2
No. of Signal Contacts 15
No. of Power Contacts 2
Consult factory
for availability
Consult factory
for availability
Shell Size C
Arrangement 27W2
No. of Signal Contacts 25
No. of Power Contacts 2
Shell Size C
Arrangement 8W8
No. of Signal Contacts 0
No. of Power Contacts 8
Shell Size C
Arrangement 21WA4
No. of Signal Contacts 17
No. of Power Contacts 4
Consult factory
for availability
Consult factory
for availability
Consult factory
for availability
Consult Factory for Additional Arrangements and Polarization
12
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 13
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
Pin
Socket
FRONT VIEW
END VIEW
FRONT VIEW
END VIEW
All Dimensions in Inches (mm)
Shell
Size
A
B
E
A
B
C
1.213 [30.81]
1.541 [39.14]
2.088 [53.04]
2.729 [69.32]
.984 [24.99]
1.312 [33.32]
1.852 [47.04]
2.500 [63.50]
C
(for pin
conn. only)
.666 [16.92]
.994 [25.25]
1.534 [38.96]
2.182 [55.42]
D
(for socket
conn. only)
.643 [16.33]
.971 [24.66]
1.511 [38.38]
2.159 [54.84]
Mounting Dimensions
STANDARD CUT-OUT
OPTIONAL CUT-OUT
(FOR FRONT MOUNTING)
(FOR REAR MOUNTING)
Size
E
A
B
C
Mounting
Front
Rear
Front
Rear
Front
Rear
Front
Rear
A
.875 [22.23]
.807 [20.50]
1.200 [30.48]
1.134 [28.80]
1.744 [44.30]
1.673 [42.49]
2.389 [60.68]
2.326 [59.08]
B
.984 [24.99]
.984 [24.99]
1.312 [33.32]
1.312 [33.32]
1.852 [47.04]
1.852 [47.04]
2.500 [63.50]
2.500 [63.50]
C
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
.512 [13.00]
.449 [11.40]
Consult Factory - Shell Size D
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
13
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 14
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
Straight PCB
Termination type E
Solder Cup
Termination types: K, L, M
14
Press Fit
Termination type R
Adapter – Pin/Socket
Termination type: D
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 15
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
PCB Layout - Straight PCB & Press Fit
E
2W2
A
3W3
B
5W5
B
9W4
Consult Factory
B
13W3
B
17W2
Consult Factory
Consult Factory
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
15
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 16
FCC17 Series
COMBO D-SUB FILTER CONNECTORS
PCB Layout - Straight PCB & Press Fit
C
8W8
C
21WA4
Consult Factory
C
27W2
Consult Factory
16
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 17
FCC57 Series
FILTERED MICRO-RIBBON CONNECTORS
Specifications
Filter Characteristics:
Electrical Data:
Material and Finishes:
Environmental Data:
UL File # :
CSA File # :
See Page 2
See Page 2
See Page 3
See Page 3
E135615
LR68598
These products are protected by U.S. Patent # 4500159
Ordering Information
FCC57 – 2 1 50
FCC57 SERIES DESIGNATION
2
1
50
CONNECTOR TYPE
0 = Adapter
1 = Plug (Available in 50 size only)
2 = Receptacle
TERMINATION TYPE
0 = Solder Cup
1 = Straight PCB
2 = Right Angle PCB
5 = Straight PCB Press-Fit
9 = Adapter Plug/Receptacle
NUMBER OF CONTACTS
36, 50, 64
2
HOUSING STYLE
0 = Standard
2 = Receptacle without Spring Latches
or Spring Holder
4
MOUNTING OPTIONS4
2 = .120" [3.05 mm] or .125" diameter hole
in flange [not standard for Adapters]
4 = 4-40 Threaded Inserts
5 = 4-40 Threaded Standoff
6 = M3 Threaded Inserts
A = 4-40 Threaded Inserts with boardlocks
E = 4-40 Jack Sockets [Supplied Loose]
2 – 4
1
0 HV
VOLTAGE
No digits = Standard
HV - High Voltage [1000V AC per part 68]
HV
MODIFIER
0 = Standard
X = Special or Custom Versions
0
FILTER CAPACITANCE (pF)
D: 50 pF
B: 100 pF
O: 180 pF
F: 330 pF
I: 470 pF
4: 820 pF
5: 1000 pF
7: 1200 pF
E: 2200 pF
9: 5600 pF
8: 47000 pF
1
High voltage capacitors available (contact factory)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
17
2536 Amphenol FCC.V6
9/21/01
10:50 AM
Page 18
FCC57 Series
FILTERED MICRO-RIBBON CONNECTORS
Receptacle - 36, 50, 64 Size
TOP VIEW
RECEPTACLE
Connector
Size
36
50
64
A
2.637 [66.98]
3.260 [82.80]
3.835 [97.41]
B
2.350 [59.69
2.947 [74.85]
3.542 [89.97]
Dimensions are different for DieCast Shells
Consult Factory for details
Panel Mounting Dimensions - 36 / 50 / 64 size
REAR MOUNT
[.050 MAX. PANEL THICKNESS]
Connector
Size
36
50
64
18
A
2.043 [71.05]
2.656 [92.36]
3.251 [113.06]
B
2.350 [59.69]
2.947 [74.85]
3.542 [89.97]
B
2.450 [85.20]
3.062 [106.48]
3.657 [127.18]
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 19
FCC57 Series 36 Size
FILTERED MICRO-RIBBON CONNECTORS
Receptacle
STRAIGHT PCB (FCC57 - 21360 - 1
x
0)
PCB LAYOUT
STRAIGHT PRESS-FIT (FCC57 - 25360 - 1
x
0)
PCB LAYOUT
RIGHT ANGLE PCB (FCC57 - 22360 - 1
x
0)
PCB LAYOUT
Adapter
PLUG/RECEPTACLE (FCC57 - 09360 - 1 X 0)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
19
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 20
FCC57 Series 50 Size
FILTERED MICRO-RIBBON CONNECTORS
Receptacle
STRAIGHT PCB (FCC57 - 21500 - x
x
0)
PCB LAYOUT
STRAIGHT PRESS-FIT (FCC57 - 25500 - x
x
0)
PCB LAYOUT
RIGHT ANGLE PCB (FCC57 - 22500 - x
x
0)
PCB LAYOUT
SOLDER CUP (FCC57 - 20500 - x
20
x
0)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 21
FCC57 Series 50 Size
FILTERED MICRO-RIBBON CONNECTORS
Plug
TOP VIEW
PLUG
STRAIGHT PCB (FCC57 - 11500 - x
x
0)
PCB LAYOUT
SOLDER CUP (FCC57 - 10500 - x
Adapter
x
0)
PLUG/RECEPTACLE (FCC57 - 09500 - x
x
0)
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
21
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 22
FCC57 Series 64 Size
FILTERED MICRO-RIBBON CONNECTORS
Receptacle
STRAIGHT PCB (FCC57 - 21640 - x
0)
PCB LAYOUT
STRAIGHT PRESS-FIT (FCC57 - 25640 - x
x
0)
PCB LAYOUT
RIGHT ANGLE PCB (FCC57 - 22640 - x
x
0)
PCB LAYOUT
ADAPTER* (FCC57 - 09640 - x
x
0)
*Consult Factory
22
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 23
456 Series
CAPACITIVELY DECOUPLED RF CONNECTORS
Specifications
Mechanical Data:
Shell:
Insulator Body:
Contact Insulator:
Center Contact:
UL File # :
CSA File # :
Zinc Diecast or Brass; Nickel plated
Thermoplastic
Nylon or Teflon
Phosphor Bronze or Berylium Copper;
Gold plated (456-107S is silver plated)
E135615
LR68598
Filter Performance:
Capacitance
Working Voltage
DWV
Filter Insertion Loss (dB)
(per MIL-STD-220
@ 25°C and
no load)
1 MHz
5 MHz
10 MHz
30 MHz
50 MHz
1000 MHz
10,000 pF
200 VDC (500AC Rear Mt)
600 VDC (1000VDC for Rear Mt)
4
16
18
25
30
30
* OTHER CAPACITANCE VALUES ARE AVAILABLE. CONSULT THE FACTORY FOR
DETAILS.
These products are protected by U.S.Patent # 4,772,221.
Amphenol’s 456 Series of RF connectors provides capacitive decoupling
between the connector body and the mounting panel. EMI on the coaxial
shield is shunted to the chassis ground through capacitors, while not
affecting the DC and power supply frequencies. This reduces ground loop
problems and provides a mechanism to harmlessly dissipate ESD to
chassis ground.
The RF parameters of these connectors are the same as their non-filtered
counterparts. Filtering does not affect the signal contact, but only the
shell-to-ground connection. Capacitively decoupled RF connectors are
intermateable and inter-changeable with standard non-filtered versions.
456 Series Construction
Grounding
Device
Capacitor
Retention Ring
Contact
Insulator
Center Contact
Chip Capacitor
and / or Spark
Gap Arrestor
Insulator Body
Shell
Boardlock
Device
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
23
2536 Amphenol FCC.V6
9/21/01
10:51 AM
Page 24
456 Series
CAPACITIVELY DECOUPLED RF CONNECTORS
Rear Mount BNC, Right Angle, PCB
50 Ω
456-117
75 Ω
456-717
Filtered (10,000pF),
1000V Spark Gap
456-117S
456-717S
Filtered (10,000pF),
1000V Spark Gap,
1 M Ω Resistor
456-117F
456-717F
Grounded
456-117G
456-717G
456-117NF
456-717NF
50 Ω
456-208
75 Ω
456-218
456-208G
456-218G
Type
Filtered
Non-Filtered.
Panel Insulated
(no ground spring)
PCB LAYOUT
RECOMMENDED
PANEL CUT-OUT
(COMPONENT SIDE OF BOARD)
Rear Mount BNC, Crimp, Cable Size RG179
Type
Filtered
Grounded
Note: Also available with Spark gap and / or resistor
* Other Cable Sizes Available. Consult Factory.
RECOMMENDED
PANEL CUT-OUT
Vertical Mount BNC, Press-Fit
Type
50 Ω
75 Ω
Board
Thickness
“A”
Filtered
––
456-107A
.125 (3.18)
.170 (4.32)
Non-Filtered
Filtered
Non-Filtered
––
––
––
456-107ANF
456-107B
456-107BNF
.125 (3.18)
.200 (5.08)
.200 (5.08)
.170 (4.32)
.255 (6.48)
.255 (6.48)
– – Consult Factory for Part Number
PCB LAYOUT
(COMPONENT SIDE OF BOARD)
24
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
2536 Amphenol FCC.V6
9/21/01
10:52 AM
Page 25
456 Series
CAPACITIVELY DECOUPLED RF CONNECTORS
Front Mount BNC, Right Angle PCB
Type
Filtered
50 Ω
75 Ω
––
456-107
– – Consult factory for part number
RECOMMENDED
PANEL CUT OUT
Front Mount BNC packaging consists of connector, insulating
washer, filter ring, lock washer and hex nut.
Front Mount BNC, Solder-Cup
50 Ω
75 Ω
456-107SG
456-107TG
Type
Filtered
456-107S has silver plated contact (50 Ω).
RECOMMENDED
PANEL CUT OUT
* Overall part length
1.180 (29.97) for 456-107S
1.245 (31.62) for 456-107SG & 456-107TG.
Front Mount BNC packaging consists of connector, insulating
washer, filter ring, ground washer and hex nut.
*
Jack-to-Jack Adapter
Type
50 Ω
75 Ω
BNC:
Filtered
456-915
456-917
Twin BNC:
Filtered
456-920
RECOMMENDED
PANEL CUT OUT
TNC Bulkhead Jack, Crimp (RG58/U Cable)
Type
Filtered
50 Ω
75 Ω
456-102
––
– – Consult factory for part number
RECOMMENDED
PANEL CUT OUT
Packaging consists of connector, mounting hardware, panel
insulator, crimp ferrule and heat shrink tubing.
Amphenol® Canada Corp. Telephone: (416) 754-5656 Fax: (416) 754-8668 E-mail: sales@amphenolcanada.com
25
2536 Amphenol FCC.V6
9/21/01
10:48 AM
Page cov2
Amphenol Catalogues
DATA /TELECOM PRODUCTS
20 Melford Drive
Scarborough, Ontario
Canada M1B 2X6
Telephone 416 754-5656
Facsimile 416 754-8668
©Amphenol Canada Corp.
Specifications subject to change without notice
Printed in Canada
Design: Macrae Design Inc.
CATALOGUE NR. ADT 0001/01-06
工商网监
湘ICP备2023018690号
