G17C0900131EU

ol Ta Sondra Sang 03/09/05 Laura Su 03/09/05 Ken Lin for 03/09/05 Co E U 20 ia pl nt C HS m Ro an A mp en iw h 02/95 /E ol Ta Sondra Sang 07/08/05 Laura Su 07/08/05 Ken Lin for 07/08/05 Co E U 20 ia pl nt C HS m Ro an A mp en iw h 02/95 /E Amphenol Amphenol East Asia Limited Sheet Of 1 PNS-17C PART NUMBER SYSTEM 1 Rev. C G17C XX XX XXX X D-sub Right Angle PCB Mount 8.08mm Footprint Variation Code Number of Position Flange Mounting Option Blank: Standard 0: f3.05mm clear hole 1: #4-40 threaded hole 2: #4-40 threaded hole with #4-40UNC screwlock installed 3: #4-40 threaded hole with #4-40UNC screwlock bulk-packed 4: M3 threaded hole 5: M3 threaded hole with M3 screwlock installed 6: #4-40 threaded hole with M2.6 screwlock bulk-packed 7: #4-40 threaded screwlock clinched-mount installed 09: 09 positions 15: 15 positions 25: 25 positions 37: 37 positions 50: 50 positions Contact Style 0: Receptacle 1: Plug Contact Finish 0: Flash gold 1: 15m² gold 2: 30m² gold 3: Full flash gold 4: 50m² gold Board Mounting Option 0: None 1: f3.05mm clear hole 2: #4-40 threaded hole 3: Arrowhead boardlock 4: 4-claw boardlock Front Shell Finish 0: Zinc chromated 1: Tin over nickel 2: Nickel ! ! ! ! All contacts are in 50m² nickel underplate All specified numbers are minimum thickness of plating. The variation code may supersede some major specifications defined by this standard part number system For part number with a variation code. Please refer to the specific set of data sheets released for that PRODUCT SERIES TITLE G17C SERIES, PART NUMBER C B A SYM NE-05266 NE-97252 Henry Ko Arthur Huang Arthur Huang ECO APPROVED NO. PREPARED Sondra sang 08/30/2005 11/26/1997 09/23/1997 DATE DATE 08/30/2005 G17C This document is the property of Amphenol Corporation and is delivered on the express condition that it is not to be disclosed, reproduced or used, in whole or in part, for manufacture or sale by anyone other than Amphenol Corporation without its prior consent, and that no right is granted to disclose or to use any information in this document. CHECKED DATE APPROVED DATE Laura Su 08/30/2005 Ken Lin for 08/30/2005