GE-2156

4 PROPRIETARY NOTICE: THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO AMPHENOL AND SHALL NOT BE DISCLOSED IN WHOLE OR IN PART IN ANY FORM OR FOR ANY REASON EXCEPT AS EXPRESSLY STATED IN WRITING BY AMPHENOL. 2 3 DWG NO. GE-2156 TEMP ( $ C) -40 25 NOTES: D 50 1. CONTINUOUS OPERATING TEMPERATURE -40 °C TO 150 °C 3 85 TERMINALS:TIN PLATED 2. CONNECTOR: METRI-PACK 150.2 OR GT150 3.5mm MATING APTIV(DEPLHI) NUMBER: 12162193,15336004, OR EQUIVILANT 125 128 VOLTAGE: 5V 150 4. NEEDS A SEALING GASKET, A COPPER CRUSH WASHER OR POSSIBLY AN O-RING. RESISTANCE (OHMS) 100865 2795 980.3 283.5 88.3 81.7 47.5 SH 1 RES TOL ( # %) 1 REV C REVISIONS REV 4.87 2.50 2.27 A REVISION HISTORY DATE INITIAL RELEASE 85° C WAS 80 ° C ADDED 128 ° C ROW B JD 11/01/18 MED JD UP-DATED NOTES,28.6+/-.5 WAS 28.60, ULTEM 2300 BLACK WAS NYLON 66 GF 33% C DWN APVD 05/31/18 MED 05/30/19 MED STS D 2.00 2.75 2.77 2.90 5. RECOMENDED INSTALLATION TORQUE OF 25 NM, REFERENCE. 19 HEX CONNECTOR:ULTEM 2300-BLACK C SCALE B 56.0 M14 x 1.5 C (27.4 ) HOUSING BRASS CDA 345 TYPICAL, 25 °C CIRCUIT 1:1 1.0 28.6 B 0.5 (17 ) Amphenol Advanced Sensors St. Marys, PA 15857 TITLE FLUID TEMPERATURE SENSOR 8.30 0.13 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MM TOLERANCES ARE: .X .XX A # # 0.5 0.25 APPROVALS ANGLES # 2 $ DO NOT SCALE DRAWING THIRD ANGLE PROJECTION INTERPRET DRAWING IAW ASME Y14.5 MATERIAL SIZE B SCALE LEGAL NOTICE - THIS DRAWING AND ANY INTELLECTUAL PROPERTY RIGHTS THERE IN ARE PROPERTY OF AMPHENOL AND NO LICENSES ARE GRANTED UNDER THOSE RIGHTS 4 3 2 1:1 SEE DRAWING DWG NO. DATE DAM/MED 05/31/18 CHECKED STS 05/31/18 ENGR JJD 05/31/18 DRAWN QC MFG GE-2156 1 REV SHEET 1 OF 1 C A