GTCL06-22-14P-025-LC

Amphenol ® ACA-B and GT Series Reverse Bayonet Coupling Connectors www.amphenol-industrial.com Amphenol® 97 Series Connectors are UL recognized and CSA recognized. For further information on your individual application requirements, contact: Amphenol Corporation Amphenol Industrial Operations 191 Delaware Avenue Sidney, New York 13838-1395 Phone: 888-364-9011 Fax: 520-397-7169 View and download or print Amphenol catalogs on-line at: www.amphenol-industrial.com Amphenol Industrial is a Certified ISO 9001 Manufacturer Table of Contents Page Amphenol® ACA-B Reverse Bayonet Coupling Connectors General Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 ACA-B Connector Classes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 ACA 3101F-B inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 ACA 3101E-B inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 ACA 3101G-B inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 ACA 3101R-B inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 ACA 3102E-B box mount receptacle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 ACA 3103F-B wall mount receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 ACA 3103E-B wall mount receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 ACA 3103G-B wall mount receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 ACA 3103R-B wall mount receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 ACA 3106F-B straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 ACA 3106E-B straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 ACA 3106G-B straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 ACA 3106R-B straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 ACA 3107A-B jam nut receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 ACA 3108F-B 90 degree angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 ACA 3108E-B 90 degree anlge plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 ACA-B Connectors How to Order- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 78 Amphenol® GT Series Reverse Bayonet Coupling Connectors General Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT Connector Classes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT01A inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT01AF/01F inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT01G inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT01R inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT01RV inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT02R box mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030 square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030A square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030AF/030F square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030G square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030R square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT030RV square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06A straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06AF/06F straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06CF straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06G straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06AMI/GT06RMI - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06R straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06RV straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT06SB straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT07R jam nut receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT070 jam nut receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT08A 90° angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT08AF/08F 90° angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT08R 90° angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT05 dummy receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GTTB thru-bulkhead receptacles - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GT Connectors How to Order - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 79 Amphenol ACA-B/GT Reverse Bayonet Insert Arrangements Insert availability- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48-50 Insert alternate positioning- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51 Solder contacts- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 52 Crimp contacts- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53 RADSOK® technology and crimp socket contacts- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 54 Contact arrangements- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 55-77 Amphenol ACA-B/GT Reverse Bayonet Accessories 10-40450, 10-36675, 10-580649 sealing gaskets- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 80 Receptacle protection caps- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 81 Plug protection caps- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 82 Rear mounting data - receptacles, sealing plugs, sealing ranges- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 83 MS3057-A cable clamp- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 84 MS3420 bushing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 85 MS3057-C style (10-350349) cable clamp- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 86 Glands - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 87 GT Amphe-Power Connectors with RADSOK® Technology, Amphe-Power™ Amphe-GTR, Power GT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 88 Special Application GT Connectors: GTC-M Series with metal clips, GT-PC Connectors for high voltage power applications, GT Connectors for the HMI Lighting industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 89 Additional Amphenol Industrial Products for the Rail Industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 90, 91 Amphenol ®® ACA-B ACA-B Connectors Connectors Amphenol with reverse reverse bayonet bayonet coupling coupling with ® ® Features ACA-B Reverse Featuresof ofthe theAmphenol Amphenol ACA-B Reverse ® Features of the Amphenol ACA-B BayonetCoupling CouplingConnectors Connectors with Reverse MIL-DTLBayonet with Bayonet Coupling 5015AS50151 insert patterns: SAE insertConnectors patterns: with MIL-DTL5015 insert patterns: • • • • • • • • • • • • • • • • • • • • • • • • • • • • Quick positive coupling Quick positive coupling Audible and tactile indication of full coupling Audible and tactile indication of full coupling Waterproof - IP67 rated Waterproof - IP67 rated No lockwiring required No lockwiring required High shock and vibration capabilites High shock and vibration capabilites Inserts available in Neoprene Inserts available in Neoprene Available in both crimp and solder terminations Available in both crimp and solder terminations Contacts available in gold and silver plating Contacts available in gold and silver plating Numerous finishes available Numerous finishes available Zinc alloy plating (cadmium free) available Zinc alloy plating (cadmium free) available Rugged construction Rugged construction Intermateable with existing VG95234 connectors Intermateable with existing VG95234 connectors 500 couplings minimum 500 couplings minimum Up to 50% more ampacity with the use of RADSOK® ® Up to 50% more ampacity with the use of RADSOK socket contacts. Consult Amphenol Industrial Operasocket contacts. Consult Amphenol Industrial Opera® Amphetions for more information or see Amphenol ® Amphetions forConnectors more information or see Amphenol ® Power with RADSOK Technology, SL® Power Connectors with RADSOK Technology, 391 (online at www.amphenol-industrial.com). SL391 (online at www.amphenol-industrial.com). • Operating temperature range: -55°c to 125°c • Operating temperature range: -55°c to 125°c p h e n ol Ampheno l m A oHS R HS Ro U E RoHS Compliant Product RoHS Compliant Product Available – Consult Available – Consult Amphenol Industrial Operations. Amphenol Industrial Operations. The ACA-B is designed for commercial and Industrial The ACA-B is designed commercial and Industrial environments requiring for a rugged bayonet style connecenvironments requiring rugged bayonet style connector for heavy duty powera and signal applications. tor for heavy duty power and signal applications. A comprehensive selection selection of insert arrangements and accesA comprehensive comprehensive of insert insert arrangements arrangements and and accesaccesA selection of sory hardware configurations are featured to accommodate sory hardware configurations are featured to accommodate sory hardware configurations arecable. featured to accommodate heavy-duty, commercial wire and and heavy-duty, commercial wire cable. heavy-duty, commercial wire and cable. ACA-B is manufactured in accordance with MIL-DTL-5015 and ACA-B in accordance and VG95234. The insulators made of with high quality polychloroACA-B is is manufactured manufactured inare accordance with MIL-DTL-5015 SAE AS50151 and VG95234. The and insulators are made of high quality polychloroprene material can withstand temperatures of –55 to +125 VG95234. The insulators are made of high quality polychloroprene material can withstand temperatures of –55alloy to +125 degrees C. Theand rugged is made from aluminum and prene material and can shell withstand temperatures of -55 to +125 degrees C. The rugged shell is made from aluminum alloy and plated with a variety of finishes to meet any application. Condegrees C. The rugged shell is made from aluminum alloy and plated withmachined a variety of finishes to alloy meet or anybrass application. Contacts are from copper and can be platedare withmachined a variety from of finishes to alloy meet or anybrass application. Contacts copper and can be plated with gold or silver. tacts are machined from copper alloy or brass and can be plated plated with gold or silver. with gold or silver. Common applications include automation, machine tool, robotCommon applications include machine tool, ics, instrumentation, control, material handling, and Common applicationsprocess include automation, automation, machine tool, robotrobotics, instrumentation, process control, material handling, test measurement. ics, and instrumentation, process control, material handling, and and test and measurement. test and measurement. E U / 20 EC 0 2 / 95 / / 20 EC 0 2 / 95 / 1 1 1 ACA-B Connector Classes 25 2 ACA 3101F-B inline receptacle • • Receptacle with solid backshell and rear accessory threads Includes grommet and grommet sleeve M B P N F Q K L S Inches Shell Size B Thread Class 2A F Min. K Min. .520 .374 10SL .6250-24 UNEF .409 16S .8750-20 UNEF .638 14S 16 .7500-20 UNEF .8750-20 UNEF .638 L Max. M + .016 – .000 1.969 .717 .374 1.969 .374 1.969 .374 2.362 .717 N + .000 – .006 .717 .969 .717 1.079 .846 1.079 P ± .008 Q ± .008 S Max. .126 1.000 1.173 .126 1.126 .110 .126 .811 1.126 .992 1.272 1.272 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618 20 24 28 32 36 1.1875-18 UNEF .867 1.4375-18 UNEF 1.094 1.7500-18 UNS 1.488 1.4375-18 UNEF .374 .374 1.228 2.0000-18 UNS .374 .433 1.780 .465 2.362 2.560 2.560 2.560 3.150 .907 .907 .947 .947 .947 1.346 1.610 1.839 2.102 2.346 .157 .157 .157 .157 .157 1.374 1.626 1.874 2.126 2.386 1.488 1.756 2.004 2.248 2.504 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 Q ± 0.2 S Max. 14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8 10SL 16S 16 18 20 22 24 28 32 36 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 37.8 45.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 11.0 11.8 50 50 18.2 18.2 60 21.5 60 23.0 60 60 65 65 65 80 18.2 27.4 27.4 23.0 30.8 34.2 23.0 37.4 23.0 40.9 24.1 46.7 24.1 53.4 24.1 59.6 All dimensions for reference only. 30 3 2.8 3.2 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 20.6 28.6 28.6 31.7 34.9 25.2 32.3 32.3 34.8 37.8 38.1 41.1 47.6 50.9 41.3 54.0 60.6 44.6 57.1 63.6 ACA 3101E-B inline receptacle • • Receptacle with cable clamp and telescopic bushing Includes grommet and grommet sleeve M P N B Q KK L LL S Inches L Max. M + .016 – .000 N + .000 – .006 P ± .008 Q Max. S Max. KK Max. .354 2.440 .717 .969 .126 1.161 1.173 1.083 4.720 16 .433 2.756 .846 1.079 .126 1.240 1.272 1.181 4.921 20 .622 3.031 .907 1.346 .157 1.476 1.488 1.476 4.921 Shell Size B Max. 14S 10SL 16S 18 22 24 28 32 36 .256 2.362 .433 2.756 .559 3.031 .622 3.031 .843 3.346 .843 3.346 1.051 3.346 1.248 4.134 .717 .717 .907 .907 .907 .947 .947 .947 .717 .110 1.079 .126 1.213 .157 1.472 .157 1.610 .157 1.839 .157 2.102 .157 2.346 .157 .886 1.240 1.358 1.594 1.752 1.969 2.224 2.480 .992 1.272 1.370 1.618 1.756 2.004 2.248 2.504 .894 1.181 1.300 1.476 1.705 1.705 2.035 2.283 LL Max. 4.720 4.720 4.921 4.921 4.921 4.921 4.921 5.315 Millimeters Shell Size B Max. L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 Q Max. S Max. KK Max. LL Max. 14S 9.0 62 18.2 24.6 3.2 29.5 29.8 27.5 120 27.4 3.2 31.5 32.3 30.0 125 10SL 16S 6.5 60 11.0 18.2 27.4 77 23.0 30.8 11.0 70 20 15.8 77 22 24 28 32 36 14.2 15.8 77 21.4 85 21.4 26.7 31.7 18.2 70 16 18 18.2 85 85 105 21.5 23.0 23.0 23.0 24.1 24.1 24.1 2.8 3.2 4.0 34.2 4.0 37.4 4.0 40.9 4.0 46.7 4.0 53.4 4.0 59.6 4.0 All dimensions for reference only. 31 4 22.5 31.5 34.5 37.5 40.5 44.5 50.0 56.5 63.0 25.2 32.3 34.8 37.8 41.1 44.6 50.9 57.1 63.6 22.7 30.0 33.0 37.5 37.5 43.3 43.3 51.7 58.0 120 120 125 125 125 125 125 125 135 ACA 3101G-B inline receptacle • • Receptacle with backshell for heat shrink termination Does not include grommet and grommet sleeve M P N Z BB JJ KK J Q K S L Inches Shell Size L Max. M + .016 – .000 1.969 .717 J ± .008 K ± .020 14S .138 .461 16 .138 .453 2.362 .846 20 .138 .500 2.559 .907 10SL 16S 18 22 24 28 32 36 .138 .138 .138 .138 .138 .138 .138 .138 .461 1.969 .461 1.969 .453 .500 .500 .500 .598 .598 2.362 2.559 2.559 2.559 2.756 3.150 .717 .717 .907 .907 .907 .947 .947 .947 N + .000 – .006 P ± .008 Q Max. S Max. .969 .126 1.161 1.173 1.079 .126 1.240 1.272 .531 .862 .941 1.346 .157 1.476 1.488 .736 1.031 1.165 .969 1.358 1.488 .717 1.079 1.213 1.472 1.610 1.839 2.102 2.346 .110 .126 .157 .157 .157 .157 .157 .157 .886 1.240 1.358 1.594 1.752 1.969 2.224 2.480 .992 1.272 1.370 1.618 1.756 Z Min. .303 .417 .531 .575 .819 2.004 1.062 2.504 1.516 2.248 1.311 BB Max. .524 .669 .862 .862 1.031 1.358 1.717 1.717 JJ ± .008 KK ± .008 .752 .791 .610 .941 .669 .925 .925 .941 1.043 1.165 1.323 1.488 1.882 1.882 1.189 1.421 1.630 1.913 2.157 Millimeters J ± 0.2 K ± 0.5 L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 Q Max. S Max. Z Min. BB Max. JJ ± 0.2 KK ± 0.2 3.5 11.7 50 18.2 24.6 3.2 29.5 29.8 10.6 17.0 19.1 20.1 16 3.5 11.5 60 21.5 27.4 3.2 31.5 32.3 13.5 21.9 23.9 23.5 20 3.5 65 23.0 34.2 4.0 37.5 37.8 18.7 26.2 29.6 30.2 Shell Size 10SL 14S 16S 18 22 24 28 32 36 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 12.7 12.7 12.7 12.7 15.2 15.2 50 50 60 65 65 65 70 80 18.2 18.2 23.0 23.0 23.0 24.1 24.1 24.1 18.2 27.4 30.8 37.4 40.9 46.7 53.4 59.6 2.8 3.2 4.0 4.0 4.0 4.0 4.0 4.0 All dimensions for reference only. 32 5 22.5 31.5 34.5 40.5 44.5 50.0 56.5 63.0 25.2 32.3 34.8 41.1 44.6 50.9 57.1 63.6 7.7 13.5 14.6 20.8 24.6 27.0 33.3 38.5 13.3 21.9 21.9 26.2 34.5 34.5 43.6 43.6 15.5 23.9 23.9 29.6 37.8 37.8 47.8 47.8 17.0 23.5 26.5 33.6 36.1 41.4 48.6 54.8 ACA 3101R-B inline receptacle • • Receptacle with short endbell for individual wire sealing Includes grommet and grommet sleeve M P N KK Q L S Inches Shell Size L Max. M + .016 – .000 N + .000 – .006 P ± .008 1.890 .717 .969 .126 2.205 .846 10SL 1.890 16S 1.890 14S 16 18 20 22 24 28 32 36 2.244 2.244 2.244 2.244 2.244 2.362 2.362 .717 .717 .110 Q Max. .886 1.161 S Max. KK Max. 1.173 .945 .992 .787 .717 1.079 .126 1.240 1.272 1.024 .907 1.213 .157 1.358 1.370 1.161 .907 .907 .907 .947 .947 .947 1.079 .126 1.346 .157 1.472 .157 1.610 .157 1.839 .157 2.102 .157 2.346 .157 1.240 1.476 1.594 1.752 1.969 2.224 2.480 1.272 1.488 1.618 1.756 2.004 2.248 2.504 1.024 1.299 1.417 1.575 1.811 2.028 2.283 Millimeters Shell Size L Max. M + 0.4 – 0.0 14S 48.0 18.2 56.0 21.5 10SL 16S 16 18 20 22 24 28 32 36 48.0 48.0 57.0 57.0 57.0 57.0 57.0 60.0 60.0 18.2 18.2 23.0 23.0 23.0 23.0 24.1 24.1 24.1 N + 0.00 – 0.15 P ± 0.2 Q Max. S Max. KK Max. 24.6 3.2 29.5 29.8 24.0 31.5 32.3 18.2 2.8 27.4 3.2 27.4 3.2 30.8 4.0 34.2 4.0 37.4 4.0 40.9 4.0 46.7 4.0 53.4 4.0 59.6 4.0 All dimensions for reference only. 33 6 22.5 31.5 34.5 37.5 40.5 44.5 50.0 56.5 63.0 25.2 32.3 34.8 37.8 41.1 44.6 50.9 57.1 63.6 20.0 26.0 26.0 29.5 33.0 36.0 40.0 46.0 51.5 58.0 ACA 3102E-B ACA 3102E-B box mount for frontfor panel boxreceptacle mount receptacle frontmounting panel mounting • • Receptacle without threads for panelthreads mounting • Receptacle without for panel mounting Four through •mounting holes or optionalholes metric Four through mounting orthreaded optional holes metric threaded holes T THRU HOLE R T1 THREAD Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 R S S L Shell ± .012Size 1.087 10SL 1.087 16S 1.331 16 1.331 18 1.331 20 1.331 22 1.331 24 1.406 28 1.469 32 1.469 36 M + .016 L – .000 ± .012 .717 1.087 .717 1.087 .717 1.087 .846 1.331 .907 1.331 .907 1.331 .907 1.331 .907 1.331 .947 1.406 .947 1.469 .947 1.469 P M P 82º S T1 R THREAD 1.087 14S M T THRU HOLE R N S KK N L N M + .000 + .016 – .006 – .000 .717 .717 .969 .717 1.079 .717 1.079 .846 1.213 .907 1.346 .907 1.472 .907 1.610 .907 1.839 .947 2.102 .947 2.346 .947 N P + .000 ± .008 – .006 .110 .717 .126 .969 .126 1.079 .126 1.079 .157 1.213 .157 1.346 .157 1.472 .157 1.610 .157 1.839 .157 2.102 .157 2.346 82º KK T T Inches Inches L R P ± .004 ± .008 .717.110 .906.126 .969.126 .969.126 1.063.157 1.157.157 T Thru Hole S R + .004 S ± .012 – .000 ± .004 ± .012 1.000 .717 .1261.000 1.181 .906 .1261.181 T Thru Hole KK + .004 Max.– .000 .626 .126 1.280 .969 1.3781.063 1.4961.157 .882 .126 1.008 .126 1.142 .126 1.280 .969 1.252.157 1.374.157 1.6141.252 1.7521.374 1.937.157 2.5001.937 1.563.157 1.752.157 .1261.280 .1261.280 .1261.378 .1261.496 .1261.614 .1461.752 2.0001.563 2.2441.752 .1462.000 .1692.244 .1692.500 .756 .126 .882 .126 1.268 .126 1.390 .146 1.630 .146 1.882 .169 2.063 .169 Millimeters Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 T T M N Thru Hole T1Thru Hole M N T1 L Shell + 0.4 + 0.00 P R S + 0.1 Metric L + 0.4 + 0.00 P R S + 0.1 KK Metric ± 0.3 Size – 0.0 ± 0.3 – 0.15 – 0.0 ± 0.2 – 0.15 ± 0.1 ± 0.2 ± 0.3 ± 0.1 – 0.0 ± 0.3 Thread– 0.0 Max. Thread 27.6 10SL 18.2 27.6 18.2 25.4 18.2 3.2 M4 3.2 15.9 18.2 2.8 18.2 18.2 2.8 25.4 M4 27.6 14S 18.2 27.6 24.6 30.0 23.0 3.2 M4 3.2 19.2 18.2 3.2 24.6 23.0 3.2 30.0 M4 27.6 16S 18.2 27.6 27.4 32.5 24.6 3.2 M4 3.2 22.4 18.2 3.2 27.4 24.6 3.2 32.5 M4 33.8 16 21.5 33.8 27.4 32.5 24.6 3.2 M4 3.2 22.4 21.5 3.2 27.4 24.6 3.2 32.5 M4 33.8 18 23.0 33.8 30.8 35.0 27.0 3.2 M4 3.2 25.6 23.0 4.0 30.8 27.0 4.0 35.0 M4 33.8 20 23.0 33.8 34.2 38.0 29.4 3.2 M4 3.2 29.0 23.0 4.0 34.2 29.4 4.0 38.0 M4 33.8 22 33.8 24 35.7 28 37.3 32 23.0 33.8 37.4 24.1 35.7 46.7 23.0 33.8 24.1 37.3 40.9 53.4 23.0 4.0 23.0 4.0 24.1 4.0 24.1 4.0 37.3 36 24.1 37.3 59.6 24.1 4.0 All dimensions for reference only. All dimensions for reference only. 37.4 31.8 46.7 39.7 59.6 49.2 40.9 34.9 53.4 44.5 34 7 4.0 41.0 4.0 50.8 4.0 63.5 4.0 44.5 4.0 57.0 34 31.8 3.2 39.7 3.7 49.2 4.3 34.9 3.7 44.5 4.3 41.0 44.5 50.8 57.0 63.5 M4 3.2 M4 3.7 M5 3.7 M5 4.3 M5 4.3 32.2 35.3 41.4 47.8 52.4 M4 M4 M5 M5 M5 KK Max. .626 .756 .882 .882 1.008 1.142 1.268 1.390 1.630 1.882 2.063 Millimeters KK Max. 15.9 19.2 22.4 22.4 25.6 29.0 32.2 35.3 41.4 47.8 52.4 ACA 3103F-B wall mounting receptacle for rear panel mounting • • • Receptacle with backshell and rear accessory threads Includes wire sealing grommet and grommet sleeve for individual wires Four through mounting holes or optional metric threaded holes T THRU HOLE M R T1 THREAD B P N S F K R L S Inches Shell Size B Thread Class 2A F Min. K Min. .7500-20 UNEF .520 .374 10SL .6250-24 UNEF 16S .8750-20 UNEF 14S 16 .8750-20 UNEF .409 .638 .638 32 36 1.7500-18 UNS 1.488 2.0000-18 UNS 1.228 1.780 .969 .126 .906 1.181 .126 2.362 .374 1.4375-18 UNEF .717 .374 .965 28 1.969 2.362 1.1875-18 UNEF 1.094 S ± .012 .374 22 1.4375-18 UNEF R ± .004 1.969 .374 24 P ± .008 .374 .756 .867 N + .000 – .006 1.969 1.0000-20 UNEF 1.1875-18 UNEF M + .016 – .000 .374 18 20 L Max. T Thru Hole + .004 – .000 .374 .374 .433 .465 .717 .717 .717 .110 1.079 .846 .126 1.079 .126 .717 .969 .969 1.000 1.280 1.280 .126 .126 .126 2.362 .907 1.213 .157 1.063 1.378 .126 2.362 .907 1.472 .157 1.252 1.614 .126 .907 2.560 1.346 .907 2.560 1.610 .947 2.560 .157 1.839 .947 3.150 .157 .157 2.102 .947 .157 2.346 .157 1.157 1.374 1.563 1.752 1.937 1.496 1.752 2.000 2.244 2.500 .126 .146 .146 .169 .169 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T Thru Hole + 0.1 – 0.0 14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 10SL 16S 10.4 16.2 9.5 9.5 50 50 18.2 18.2 18.2 27.4 2.8 3.2 18.2 24.6 25.4 32.5 3.2 3.2 16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 18 22 24 28 32 36 19.2 24.5 27.8 31.2 37.8 45.2 9.5 9.5 9.5 9.5 11.0 11.8 60 60 65 65 65 80 23.0 23.0 23.0 24.1 24.1 24.1 30.8 37.4 40.9 46.7 53.4 59.6 All dimensions for reference only. 35 8 4.0 4.0 4.0 4.0 4.0 4.0 27.0 31.8 34.9 39.7 44.5 49.2 35.0 41.0 44.5 50.8 57.0 63.5 3.2 3.2 3.7 3.7 4.3 4.3 T1 Metric Thread M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 ACA 3103E-B wall mount receptacle for rear panel mounting • • • Receptacle with cable clamp and telescopic bushing Includes grommet and grommet sleeve Four through mounting holes or optional metric threaded holes M T THRU HOLE R T1 THREAD S P A KK Z L R LL S Inches Shell Size L Max. M + .016 – .000 N + .000 – .006 P ± .008 R ± .004 S ± .012 T Thru Hole + .004 – .000 2.440 .717 .969 .126 .906 1.181 .126 10SL 2.362 16S 2.756 .717 18 3.031 .907 14S 16 20 22 24 28 32 36 2.756 3.031 3.031 3.346 3.346 3.346 4.134 .717 .717 .110 1.079 .126 .846 1.079 .126 .907 1.346 .157 .907 .907 .947 .947 .947 .717 1.213 1.472 1.610 .969 1.839 2.102 .433 4.720 1.181 4.720 4.720 .433 1.181 4.921 1.157 1.496 .126 .622 1.476 4.921 1.252 1.378 .126 1.614 1.374 .843 .146 2.244 1.937 .622 .146 2.000 1.752 .559 .126 1.752 1.563 .157 .126 .894 1.083 .126 .157 .157 2.346 1.280 .354 .256 LL Max. 1.280 1.063 .157 .126 KK Max. .969 .157 .157 1.000 Z Max. .843 .169 2.500 1.051 .169 1.248 1.300 1.476 1.705 1.705 2.035 2.283 4.921 4.921 4.921 4.921 4.921 5.315 Millimeters Shell Size 10SL 14S 16S L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T Thru Hole + 0.1 – 0.0 62 18.2 24.6 3.2 23.0 30.0 3.2 60 70 18.2 18.2 18.2 27.4 2.8 3.2 18.2 25.4 24.6 32.5 3.2 3.2 T1 Metric Thread Z Max. KK Max. LL Max. M4 9.0 27.5 120 M4 M4 6.5 11.0 22.7 30.0 120 120 16 70 21.5 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 125 20 77 23.0 34.2 4.0 29.4 38.0 3.2 M4 15.8 37.5 125 18 22 24 28 32 36 77 77 85 85 85 105 23.0 23.0 23.0 24.1 24.1 24.1 30.8 37.4 40.9 46.7 53.4 59.6 4.0 4.0 4.0 4.0 4.0 4.0 27.0 35.0 31.8 41.0 34.9 44.5 39.7 50.8 44.5 57.0 49.2 63.5 All dimensions for reference only. 36 9 3.2 3.2 3.7 3.7 4.3 4.3 M4 M4 M4 M5 M5 M5 14.2 15.8 21.4 21.4 26.7 31.7 33.0 37.5 43.3 43.3 51.7 58.0 125 125 125 125 125 135 ACA 3103G-B wall mount receptacle for rear panel mounting • • • Receptacle with endbell for heat shrink termination Does not include grommet and grommet sleeve Four through mounting holes or optional metric threaded holes M T THRU HOLE R P N S Z T1 THREAD BB JJ KK J R K S L Inches Shell Size 10SL 14S 16S J ± .008 K ± .020 .138 .461 .138 .138 L Max. M + .016 – .000 N + .000 – .006 P ± .008 R ± .004 S ± .012 T Thru Hole + .004 – .000 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .461 1.969 .461 1.969 .717 .717 1.079 .907 1.213 .110 .717 .126 .969 1.000 .126 1.280 .126 BB Max. JJ ± .008 KK ± .008 .791 .303 .524 .531 .862 .610 .138 20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 22 .138 .138 .453 .500 2.362 2.559 .907 1.472 28 .138 .500 2.559 .947 1.839 36 .138 .598 3.150 .947 2.346 32 .138 .598 2.756 .947 .157 1.063 .157 1.252 .157 2.102 1.563 .157 1.752 .157 1.937 1.378 .126 1.614 .575 .126 2.000 2.244 .819 .146 1.062 .169 1.516 .169 2.500 .862 1.031 1.358 1.311 1.717 1.717 .669 .941 16 18 .453 .717 Z Min. .925 .925 .941 1.043 1.165 1.323 1.189 1.421 1.488 1.630 1.882 1.913 1.882 2.157 Millimeters J ± 0.2 K ± 0.5 L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T Thru Hole + 0.1 – 0.0 14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 3.2 M4 10.6 17.0 19.1 20.1 16 3.5 11.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5 20 3.5 Shell Size 10SL 16S 18 22 24 28 32 36 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 12.7 12.7 12.7 12.7 15.2 15.2 50 50 60 65 65 65 65 70 80 18.2 18.2 23.0 23.0 23.0 23.0 24.1 24.1 24.1 18.2 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 2.8 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 18.2 24.6 25.4 32.5 27.0 35.0 29.4 38.0 31.8 41.0 34.9 44.5 39.7 50.8 44.5 57.0 49.2 63.5 All dimensions for reference only. 37 10 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 T1 Metric Thread Z Min. BB Max. JJ ± 0.2 KK ± 0.2 M4 M4 M4 M4 M4 M4 M5 M5 M5 7.7 13.5 14.6 18.7 20.8 24.6 27.0 33.3 38.5 13.3 21.9 21.9 26.2 26.2 34.5 34.5 43.6 43.6 15.5 23.9 23.9 29.6 29.6 37.8 37.8 47.8 47.8 17.0 23.5 26.5 30.2 33.6 36.1 41.4 48.6 54.8 ACA 3103R-B wall mount receptacle for rear panel mounting • • • Receptacle with short endbell for individual wire sealing Includes grommet and grommet sleeve Four through mounting holes or optional metric threaded holes T THRU HOLE M R T1 THREAD S P N KK R S L Inches Shell Size L Max. M + .016 – .000 N + .000 – .006 P ± .008 R ± .004 S ± .012 T Thru Hole + .004 – .000 1.890 .717 .969 .126 .906 1.181 .126 1.280 .126 10SL 1.890 16S 1.890 .717 1.079 .126 .969 18 2.244 .907 1.213 .157 1.063 14S 16 20 22 24 28 32 36 2.205 2.244 2.244 2.244 2.244 2.362 2.362 .717 .717 .846 .110 1.079 .907 .126 1.346 .907 .907 1.610 .947 .157 1.496 1.614 1.374 1.752 1.563 .157 2.346 1.378 1.252 .157 2.102 .947 1.280 1.157 .157 1.839 1.000 .969 .157 1.472 .947 .717 2.000 1.752 .157 2.244 1.937 2.500 .126 .126 .126 .126 .126 .146 .146 .169 .169 KK Max. .787 .945 1.024 1.024 1.161 1.299 1.417 1.575 1.811 2.028 2.283 Millimeters Shell Size L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T Thru Hole + 0.1 – 0.0 14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 M4 26.0 20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 M4 33.0 10SL 16S 18 22 24 28 32 36 48.0 48.0 57.0 57.0 57.0 57.0 60.0 60.0 18.2 18.2 23.0 23.0 23.0 24.1 24.1 24.1 18.2 27.4 30.8 37.4 40.9 46.7 53.4 59.6 2.8 18.2 3.2 24.6 4.0 27.0 4.0 31.8 4.0 34.9 4.0 39.7 4.0 44.5 4.0 49.2 All dimensions for reference only. 38 11 25.4 32.5 35.0 41.0 44.5 50.8 57.0 63.5 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 T1 Metric Thread KK Max. M4 24.0 M4 M4 M4 M4 M4 M5 M5 M5 20.0 26.0 29.5 36.0 40.0 46.0 51.5 58.0 ACA 3106F-B straight plug • • Plug with backshell and rear accessory threads Includes grommet and grommet sleeve B F K Q L Inches Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 14S 16 .7500-20UNEF 36 .638 .867 1.1875-18UNEF 32 .374 1.1875-18UNEF 22 28 .520 .409 .638 1.0000-20UNEF 24 K Min. .8750-20UNEF 18 20 F Min. .756 .965 L Max. Q Max. 1.969 1.150 .374 2.362 1.260 .374 2.362 .374 1.969 .374 1.969 .374 2.362 .374 2.362 .898 1.260 1.437 1.571 1.697 1.4375-18UNEF 1.094 .374 2.560 1.835 1.7500-18UNS 1.488 .433 2.560 2.366 1.4375-18UNEF 2.0000-18UNS 1.228 1.780 .374 2.560 .465 3.150 2.102 2.610 Millimeters Shell Size F Min. K Min. L Max. Q Max. 14S 13.2 9.5 50 29.2 10SL 16S 16 18 20 22 24 28 32 36 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 37.8 45.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 11.0 11.8 All dimensions for reference only. 39 12 50 50 60 60 60 60 65 65 65 80 22.8 32.0 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 ACA 3106E-B straight plug • • Plug with cable clamp and telescopic bushing Includes grommet and grommet sleeve Z KK L LL Q Inches Shell Size 10SL 14S 16S L Max. 2.165 2.362 2.362 Q Max. .898 1.181 1.437 .559 1.268 20 2.953 1.571 24 3.543 1.835 32 3.543 2.366 28 36 2.953 3.543 3.937 .894 1.083 .433 1.260 22 .354 KK Max. 1.260 2.756 2.756 .256 1.150 16 18 Z Max. .433 .622 1.181 1.476 1.697 .622 1.476 2.102 .843 1.705 .843 1.051 2.610 1.248 1.705 2.035 2.283 LL Max. 4.528 4.528 4.528 4.724 4.724 4.724 4.724 4.724 4.724 4.724 5.118 Millimeters Shell Size L Max. Q Max. Z Max. 14S 60 29.2 9.0 27.5 115 11.0 30.0 120 10SL 16S 16 18 20 22 24 28 32 36 55 60 70 70 75 75 90 90 90 100 22.8 6.5 32.0 11.0 36.5 14.2 32.0 39.9 15.8 43.1 15.8 46.6 21.4 53.4 21.4 60.1 26.7 66.3 31.7 All dimensions for reference only. 40 13 KK Max. 22.7 30.0 32.2 37.5 37.5 43.3 43.3 51.7 58.0 LL Max. 115 115 120 120 120 120 120 120 130 ACA 3106G-B straight plug • • Plug with backshell for heat shrink termination Does not include grommet and grommet sleeve Z BB JJ KK J K L Q Inches Shell Size J ± .008 K ± .020 14S .138 .461 10SL 16S .138 .138 L Max. Q Max. Z Min. BB Max. JJ ± .008 KK ± .008 1.969 1.150 .417 .669 .752 .791 .461 1.969 .461 1.969 .898 1.260 .303 .531 .524 .862 .610 .941 16 .138 .453 2.362 1.260 .531 .862 .941 20 .138 .500 2.559 1.571 .736 1.031 1.165 .969 1.358 1.488 18 22 24 28 32 36 .138 .138 .138 .138 .138 .138 .453 .500 .500 .500 .598 .598 2.362 2.559 2.559 2.559 2.756 3.150 1.437 1.697 1.835 .575 .819 .862 1.031 .941 1.165 .669 .925 .925 1.043 1.189 1.323 1.421 2.102 1.063 1.358 1.488 1.630 2.610 1.516 1.717 1.882 2.157 2.366 1.311 1.717 1.882 1.913 Millimeters Shell Size J ± 0.2 K ± 0.5 L Max. Q Max. Z Min. BB Max. JJ ± 0.2 KK ± 0.2 14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1 32.0 13.5 21.9 23.9 23.5 10SL 16S 16 18 20 22 24 28 32 36 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 11.5 12.7 12.7 12.7 12.7 15.2 15.2 50 50 60 60 65 65 65 65 70 80 22.8 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 All dimensions for reference only. 41 14 7.7 13.5 14.6 18.7 20.8 24.6 27.0 33.3 38.5 13.3 21.9 21.9 26.2 26.2 34.5 34.5 43.6 43.6 15.5 23.9 23.9 29.6 29.6 37.8 37.8 47.8 47.8 17.0 23.5 26.5 30.2 33.6 36.1 41.4 48.6 54.8 ACA 3106R-B straight plug • • Plug with short endbell for individual wire sealing Includes grommet and grommet sleeve KK Q L Inches Shell Size L Max. 10SL 1.417 16S 1.437 14S 16 18 20 22 24 28 32 36 Q Max. KK Max. .898 .787 1.260 1.024 1.437 1.161 1.437 1.150 1.929 1.260 1.929 1.969 1.571 1.969 1.697 2.008 1.835 2.008 2.102 2.087 2.366 2.106 2.610 .945 1.024 1.299 1.417 1.543 1.811 2.028 2.283 Millimeters Shell Size 10SL L Max. Q Max. KK Max. 36.0 22.8 20.0 36.5 32.0 26.0 14S 36.5 16 49.0 16S 18 20 22 24 28 32 36 29.2 32.0 49.0 36.5 50.0 39.9 50.0 43.1 51.0 46.6 51.0 53.4 53.0 60.1 53.5 66.3 All dimensions for reference only. 42 15 24.0 26.0 29.5 33.0 36.0 40.0 46.0 51.5 58.0 ACA 3107A-B jam nut receptacle • • • For rear panel single hole mounting Panel seal O-ring included Environment proof M S J G P G S N B O-Ring R Inches J Wall Thickness B Thread Class 2A G ± .012 Min. Max. M ± .012 N + .000 – .006 P ± .007 R ± .016 S ± .012 14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626 16 1.2500-18 UNEF 1.079 .189 1.500 1.748 Shell Size 10SL 16S 18 20 22 24 28 32 36 .8750-20 UNEF .441 .094 .205 .965 .717 1.2500-18 UNEF .618 .094 .295 1.055 1.079 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .618 1.5000-18 UNEF .094 .709 1.6250-18 UNEF .094 .795 1.7500-18 UNEF .094 .795 2.0000-18 UNS .094 .886 2.2500-16 UN .094 .972 2.5000-16 UN .094 1.059 .094 .295 .358 .358 .358 .394 .394 .327 1.264 1.327 1.327 1.327 1.386 1.386 1.386 .157 1.062 .189 1.500 .189 1.346 1.562 .189 1.472 1.750 .189 1.610 2.000 .189 1.839 2.000 .220 2.102 2.188 .220 2.346 2.438 .220 2.812 1.252 1.748 1.875 2.000 2.134 2.252 2.500 2.748 3.000 Millimeters J Wall Thickness Shell Size G ± 0.3 Min. Max. M ± 0.3 N + 0.00 – 0.15 P ± 0.2 R ± 0.4 S ± 0.3 14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3 10SL 11.2 2.4 5.2 16S 15.7 2.4 7.5 18 16.8 2.4 9.0 16 20 22 15.7 18.0 20.2 24 20.2 32 24.7 28 36 22.5 26.9 2.4 2.4 2.4 2.4 2.4 2.4 2.4 24.5 4.8 38 33.7 30.8 4.8 40 9.1 33.7 10.0 10.0 8.3 27 27.4 32.1 9.1 4.0 26.8 7.5 9.1 18.2 27.4 34.2 4.8 4.8 38 44 31.8 44.4 44.4 47.6 50.8 33.7 37.4 4.8 51 54.2 35.2 46.7 5.6 56 63.5 59.6 5.6 71 76.2 33.7 35.2 35.2 All dimensions for reference only. 43 16 40.9 53.4 4.8 5.6 51 62 57.2 69.8 ACA 3108F-B 90° angle plug • • 90° plug for angled attachment to panels with rear accessory threads Includes grommet and grommet sleeve Q L K J B F Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 14S 16 18 20 22 .7500-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18UNEF 1.1875-18UNEF F Max. J Min. .462 .370 .370 .337 K Max. .370 .587 .685 .810 Q Max. 1.181 1.850 1.150 1.181 2.244 1.772 1.181 .370 1.890 1.378 .370 .915 L Max. 1.181 .370 .587 2.283 1.378 .370 Inches 2.402 1.378 2.402 .898 1.299 1.299 1.437 1.571 1.697 24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835 32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366 28 36 1.4375-18UNEF 2.0000-18UNS 1.139 .370 1.687 1.575 .496 2.598 1.969 2.953 2.102 2.610 Millimeters Shell Size 10SL 14S 16S F Max. 8.5 11.7 14.9 J Min. K Max. 9.4 30 9.4 30 9.4 30 L Max. 45 47 48 Q Max. 22.8 29.2 33.0 16 14.9 9.4 30 57 33.0 20 20.5 9.4 35 61 39.9 18 22 24 28 32 36 17.4 23.2 26.0 28.9 36.7 42.8 9.4 35 9.4 35 9.4 40 9.4 40 11.0 45 12.6 50 All dimensions for reference only. 44 17 58 61 66 66 72 75 36.5 43.1 46.6 53.4 60.1 66.3 ACA 3108E-B 90° angle plug • • 90° plug for angled attachment to panels with cable clamp and telescopic bushing Includes grommet and grommet sleeve L Q K LL KK Z Shell Size K Max. L Max. Q Max. Z Max. KK Max. 1.850 1.150 .312 1.083 10SL 1.654 16S 1.772 1.890 2.087 2.283 14S 1.654 16 1.772 20 2.087 18 22 24 28 32 36 2.087 2.283 2.283 2.598 2.717 Inches 1.772 .898 1.437 .562 1.299 1.571 2.835 2.953 3.937 1.181 2.402 2.598 3.937 .437 1.299 2.598 .894 1.299 2.244 2.402 .220 1.697 1.835 2.102 2.366 2.610 .437 .625 .625 .750 .750 .937 1.250 LL Max. 3.937 1.181 3.937 1.476 3.937 1.476 1.705 1.705 2.061 2.283 3.937 3.937 3.937 3.937 4.331 4.331 Millimeters Shell Size K Max. L Max. Q Max. Z Max. KK Max. LL Max. 14S 42 47 29.2 7.92 27.5 100 10SL 16S 42 45 45 48 22.8 33.0 5.58 11.09 22.7 30.0 100 100 16 45 57 33.0 11.09 30.0 100 20 53 61 39.9 15.87 37.5 100 18 22 24 28 32 36 53 53 58 58 66 69 58 61 66 66 72 75 36.5 43.1 46.6 53.4 60.1 66.3 All dimensions for reference only. 45 18 14.27 15.87 19.05 19.05 23.79 31.75 33.0 37.5 43.3 43.3 51.7 58.0 100 100 100 100 110 110 Amphenol ® GT Connectors with reverse bayonet coupling Designed originally for use by the military, the heavy duty GT connector has become widely used in commercial, geophysical, aerospace, ground support and shipboard applications. It is the preferred connector for mass transit. Variety of Shell Styles are Available Amphenol® GT reverse bayonet coupling connectors with SAE AS50151 insert patterns features: Wall Mount Receptacle • • • • • • • • Inline Receptacle • • • • • Straight Plug • • • • • Jam Nut Receptacle Quick positive coupling Audible, tactile and visual indication of full coupling Waterproof – IP67 rated No lockwiring required High shock and vibration capabilities Inserts available in Neoprene and Viton* materials Low smoke/flame retardant inserts also available Operating temperature range: With Neoprene inserts:  –55°C to +125°C With Viton** inserts:  –50°C to +200°C With low smoke/flame retardant inserts: –55°C to +125°C Available in both crimp and solder terminations Contacts available in gold and silver plating Numerous commercial finishes available Zinc alloy plating (cadmium free) available Rugged construction; aluminum or stainless steel components Available with resilient cover coupling for added damage protection and increased gripping surface Intermateable with existing VG95234 connectors 2000 couplings minimum UL recognized Up to 50% more ampacity with the use of RADSOK® technology (see page 54) Amphenol’s special offerings of GT Series connectors (see end of catalog) include: GT Amphe-Power® Connectors with RADSOK® technology, the GTC-M Series with metal clip inserts and GT-PC Series for high voltage power applica­tions. There is also information on other Amphenol Industrial Products for the Rail Industry at the end of this catalog. For further information on your individual application require­ ments, contact: Amphenol Corporation Amphenol Industrial Operations 191 Delaware Avenue Sidney, New York 13838-1395 Phone:  888-364-9011   Fax:  520-397-7169 www.amphenol-industrial.com NOTE: The connector products in this brochure were formerly known as Bendix® products. These products are now manufactured and sold under the Amphenol® brand name. The name “Amphenol” will replace the name “Bendix” on products and literature in the future. **For availability of Viton inserts consult Amphenol, Sidney, NY. Viton is a registered trademark of Dupont/Dow Corning. 19 GT Connector Classes 29 20 GT01A inline receptacle • • • Includes backshell for accessory attachment Without wire sealing grommet and cable clamp Non-environment proof M P B N F Q K S L Inches Shell Size B Thread Class 2A F Min. K Min. .520 .374 10SL .6250-24 UNEF .409 16S .8750-20 UNEF .638 14S 16 .7500-20 UNEF .8750-20 UNEF .638 L Max. M + .016 – .000 1.969 .717 .374 1.969 .374 1.969 .374 2.362 .717 N + .000 – .006 .717 .969 P ± .008 .110 .126 Q ± .008 S Max. 1.000 1.173 .811 .717 1.079 .126 1.126 1.272 1.370 .846 1.079 .126 1.126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 20 24 28 32 36 40 1.1875-18 UNEF .867 .374 2.362 .992 .907 1.346 .157 1.374 1.272 1.488 1.618 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248 1.4375-18 UNEF 1.228 2.0000-18 UNS .374 1.780 2.2500-16 UN .465 2.016 .465 2.560 3.150 3.150 .947 .947 .947 1.839 2.346 2.579 .157 .157 .157 1.874 2.386 2.618 2.004 2.504 2.756 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 – 0.0 14S 13.2 9.5 50 18.2 10SL 10.4 9.5 50 18.2 N + 0.00 – 0.15 P ± 0.2 Q ± 0.2 S Max. 24.6 3.2 25.4 29.8 18.2 2.8 20.6 25.2 16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3 18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8 16 20 22 24 28 32 36 40 16.2 22.0 24.5 27.8 31.2 37.8 45.2 51.2 9.5 9.5 9.5 9.5 9.5 11.0 11.8 11.8 60 60 60 65 65 65 80 80 21.5 23.0 23.0 23.0 24.1 24.1 24.1 24.1 All dimensions for reference only. 37 21 27.4 34.2 37.4 40.9 46.7 53.4 59.6 65.5 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 28.6 34.9 38.1 41.3 47.6 54.0 60.6 66.5 32.3 37.8 41.1 44.6 50.9 57.1 63.6 70.0 GT01AF/01F inline receptacle GT01F • With wire sealing grommet and cable clamp • For use with individual wires • Environment proof GT01AF • With cable clamp • Wire sealing grommet not included • Non-environment proof N Z KK Q M P L S LL Inches Shell Size L Max. M + .016 – .000 N + .000 – .006 P ± .008 Q ± .008 S Max. Z Nominal KK Max. 2.440 .717 .969 .126 1.000 1.173 .312 1.083 10SL 2.362 16S 2.756 14S 16 18 20 22 24 28 32 36 2.756 3.031 3.031 3.031 3.346 3.346 3.346 .717 .717 .110 .811 .992 .220 .894 1.079 .126 1.126 1.272 .437 1.181 4.720 .907 1.213 .157 1.248 1.370 .562 1.300 4.921 .846 .907 .907 .907 .947 .947 1.079 1.346 1.472 1.610 1.839 2.102 .126 1.126 .157 1.374 .157 1.500 .157 1.626 .157 1.874 .157 2.126 1.618 1.756 2.004 2.248 .625 .750 .750 .937 1.476 1.705 1.705 2.035 Shell Size L Max. P ± 0.2 Q ± 0.2 S Max. Z Nominal KK Max. 14S 62 18.2 24.6 3.2 25.4 29.8 7.92 27.5 2.618 2.756 1.250 1.476 N + 0.00 – 0.15 .157 2.504 .625 1.181 M + 0.4 – 0.0 2.579 2.386 1.488 .437 2.346 .947 .157 1.272 .947 5.118 4.720 4.720 .717 4.134 40 LL Max. 1.375 2.283 2.579 4.921 4.921 4.921 4.921 4.921 4.921 5.315 5.709 Millimeters 10SL 16S 60 70 18.2 18.2 18.2 27.4 2.8 20.6 3.2 28.6 25.2 32.3 5.58 11.09 22.7 30.0 LL Max. 120 120 120 16 70 21.5 27.4 3.2 28.6 32.3 11.09 30.0 125 20 77 23.0 34.2 4.0 34.9 37.8 15.87 37.5 125 18 22 24 28 32 36 40 77 77 85 85 85 105 130 23.0 23.0 23.0 24.1 24.1 24.1 24.1 30.8 37.4 40.9 46.7 53.4 59.6 65.5 4.0 31.7 4.0 38.1 4.0 41.3 4.0 47.6 4.0 54.0 4.0 60.6 4.0 66.5 All dimensions for reference only. 38 22 34.8 41.1 44.6 50.9 57.1 63.6 70.0 14.27 15.87 19.05 19.05 23.79 31.75 34.92 33.0 37.5 43.3 43.3 51.7 58.0 65.5 125 125 125 125 125 135 145 GT01G inline receptacle • • • Includes wire sealing grommet For use with heat-shrink tubing Environment proof M P N Z Q BB JJ KK J K L S Inches Shell Size J ± .008 K ± .020 14S .138 .461 16 .138 10SL 16S 18 20 22 24 28 32 36 40 .138 .138 .138 .138 .138 .138 .138 .138 .138 .138 L Max. M + .016 – .000 N + .000 – .006 P ± .008 Q ± .008 S Max. Z Min. BB Max. JJ ± .008 1.969 .717 .969 .126 1.000 1.173 .417 .669 .752 .461 1.969 .461 1.969 .453 .453 .500 .500 .500 .500 .598 .598 .610 .717 .717 .717 1.079 .110 .925 .157 1.248 1.370 .575 .862 .941 1.043 1.500 1.618 .819 1.346 .157 2.559 2.559 2.756 3.150 3.150 .907 .947 .947 .947 .947 1.610 1.839 2.102 2.346 2.579 .791 .941 .907 1.472 .669 .862 2.559 .907 .610 .531 .126 2.559 .524 1.272 1.079 1.213 .303 1.126 .846 .907 .992 .126 2.362 2.362 .811 KK ± .008 .157 .157 .157 .157 .157 1.57 1.126 1.374 1.626 1.874 2.126 2.386 2.618 1.272 1.488 1.756 .531 .862 1.031 1.165 1.189 .969 1.358 1.488 1.421 1.031 1.063 1.358 2.504 1.516 1.717 2.756 .925 .736 2.004 2.248 .941 1.311 1.898 1.717 2.071 1.165 1.488 1.882 1.882 2.276 1.323 1.630 1.913 2.157 2.402 Millimeters N + 0.00 – 0.15 P ± 0.2 Q ± 0.2 S Max. Z Min. B Max. JJ ± 0.2 KK ± 0.2 Shell Size J ± 0.2 K ± 0.5 L Max. M + 0.4 – 0.0 14S 3.5 11.7 50 18.2 24.6 3.2 25.4 29.8 10.6 17.0 19.1 20.1 3.5 11.5 60 21.5 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5 10SL 16S 16 18 20 22 24 28 32 36 40 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 12.7 12.7 12.7 12.7 15.2 15.2 15.5 50 50 60 65 65 65 65 70 80 80 18.2 18.2 23.0 23.0 23.0 23.0 24.1 24.1 24.1 24.1 18.2 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5 2.8 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 All dimensions for reference only. 39 23 20.6 28.6 31.7 34.9 38.1 41.3 47.6 54.0 60.6 66.5 25.2 32.3 34.8 37.8 41.1 44.6 50.9 57.1 63.6 70.0 7.7 13.5 14.6 18.7 20.8 24.6 27.0 33.3 38.5 48.2 13.3 21.9 21.9 26.2 26.2 34.5 34.5 43.6 43.6 52.6 15.5 23.9 23.9 29.6 29.6 37.8 37.8 47.8 47.8 57.8 17.0 23.5 26.5 30.2 33.6 36.1 41.4 48.6 54.8 61.0 GT01R inline receptacle • • • With individual wire sealing grommet Includes backshell for conduit termination Environment proof M P B N F Q K L S Inches Shell Size B Thread Class 2A F Min. K Min. .520 .374 10SL .6250-24 UNEF .409 16S .8750-20 UNEF .638 14S 16 .7500-20 UNEF .8750-20 UNEF .638 L Max. M + .016 – .000 1.969 .717 .374 1.969 .374 1.969 .374 2.362 .717 N + .000 – .006 .717 .969 P ± .008 .110 .126 Q ± .008 S Max. 1.000 1.173 .811 .717 1.079 .126 1.126 1.272 1.370 .846 1.079 .126 1.126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 20 24 28 32 36 40 1.1875-18 UNEF .867 .374 2.362 .992 .907 1.346 .157 1.374 1.272 1.488 1.618 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248 1.4375-18 UNEF 1.228 2.0000-18 UNS .374 1.780 2.2500-16 UN .465 2.016 .465 2.560 3.150 3.150 .947 .947 .947 1.839 2.346 2.579 .157 .157 .157 1.874 2.386 2.618 2.004 2.504 2.756 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 – 0.0 14S 13.2 9.5 50 18.2 10SL 10.4 9.5 50 18.2 N + 0.00 – 0.15 P ± 0.2 Q ± 0.2 S Max. 24.6 3.2 25.4 29.8 18.2 2.8 20.6 25.2 16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3 18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8 16 20 22 24 28 32 36 40 16.2 22.0 24.5 27.8 31.2 37.8 45.2 51.2 9.5 9.5 9.5 9.5 9.5 11.0 11.8 11.8 60 60 60 65 65 65 80 80 21.5 23.0 23.0 23.0 24.1 24.1 24.1 24.1 All dimensions for reference only. 41 24 27.4 34.2 37.4 40.9 46.7 53.4 59.6 65.5 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 28.6 34.9 38.1 41.3 47.6 32.3 37.8 41.1 44.6 50.9 54.0 57.1 66.5 70.0 60.6 63.6 GT01RV inline receptacle • • • Includes wire sealing grommet For use with individual wires Environment proof M P N KK Q L S Inches Shell Size 10SL 14S L Max. M + .016 – .000 N + .000 – .006 P ± .008 Q ± .008 S Max. 1.890 .717 .969 .126 1.000 1.173 1.890 .717 .717 .110 .811 .992 KK Max. .787 .945 16S 1.890 .717 1.079 .126 1.126 1.272 1.024 18 2.244 .907 1.213 .157 1.248 1.370 1.161 16 20 22 24 28 32 36 40 2.205 2.244 2.244 2.244 2.244 2.362 2.362 .846 .907 .907 .907 .947 .947 .947 1.079 .126 1.346 .157 1.472 .157 1.610 .157 1.839 .157 2.102 .157 2.346 .157 .157 1.126 1.374 1.500 1.626 1.874 2.126 2.386 2.618 1.272 1.488 1.618 1.756 2.004 2.248 2.504 2.756 1.024 1.299 1.417 1.575 1.811 2.028 2.283 2.362 .947 2.579 2.539 Shell Size L Max. M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 Q ± 0.2 S Max. KK Max. 14S 48.0 18.2 24.6 3.2 25.4 29.8 24.0 Millimeters 10SL 16S 16 18 20 22 24 28 32 36 40 48.0 48.0 56.0 57.0 57.0 57.0 57.0 57.0 60.0 60.0 60.0 18.2 18.2 21.5 23.0 23.0 23.0 23.0 24.1 24.1 24.1 24.1 18.2 2.8 27.4 3.2 27.4 3.2 30.8 4.0 34.2 4.0 37.4 4.0 40.9 4.0 46.7 4.0 53.4 4.0 59.6 4.0 65.5 4.0 All dimensions for reference only. 42 25 20.6 28.6 28.6 31.7 34.9 38.1 41.3 47.6 54.0 60.6 66.5 25.2 32.3 32.3 34.8 37.8 41.1 44.6 50.9 57.1 63.6 70.0 20.0 26.0 26.0 29.5 33.0 36.0 40.0 46.0 51.5 58.0 64.5 GT02R GT02R/02RFS GT02R/02RFS box mount for panel receptacle for front frontfor panel mounting box receptacle mount receptacle frontmounting panel mounting GT02R GT02RFS GT02R GT02RFS • Environment proof when mounted withwhen proper panel with proper • Same as GT02R •except aremounting countersunk toare allow • Environment proof mounted panel Samemounting as GT02Rholes except holes countersunk sealing gasket (seesealing page 80) 79) mating of plugs with rubber coupling gasket (see page 79) mating ofcovered plugs with rubbernuts covered coupling nuts 83 • For rear mounting see page 85 • information For rear mounting information see page 85 T M T P M P 82º R S N R S N KK 82º KK T R S L R L S T GT02RFS GT02RFS Countersunk holes required Countersunk holes required when mating with GT06CFGG, when mating with GT06CFGG, page 55 and GT08CFGG, page 55 and GT08CFGG, page 73 page 73 Inches Shell Size 10SL 14S 16S 16 18 20 22 24 28 32 36 L Shell ± .012 Size 1.087 10SL 1.087 14S 1.087 16S 1.331 16 1.331 18 1.331 20 1.331 22 1.331 24 1.406 28 1.469 32 1.469 36 40 1.469 40 Shell Size L Shell ± 0.3 Size 27.6 10SL 10SL 14S 16S 16 18 20 22 24 28 32 36 27.6 14S 27.6 16S 33.8 16 33.8 18 33.8 20 33.8 22 33.8 24 35.7 28 37.3 32 37.3 36 M + .016 L – .000± .012 .717 1.087 .717 1.087 .717 1.087 .846 1.331 .907 1.331 .907 1.331 .907 1.331 .907 1.331 .947 1.406 .947 1.469 .947 1.469 N M + .000+ .016 – .006– .000 .717 .717 .969 .717 1.079 .717 1.079 .846 1.213 .907 1.346 .907 1.472 .907 1.610 .907 1.839 .947 2.102 .947 .126 .969 .126 1.079 .126 1.079 .157 1.213 .157 1.346 .157 1.472 .157 1.610 .157 1.839 .157 2.102 .157 2.346 R P ± .004± .008 .717 .110 .906 .126 .969 .126 .969 .126 1.063.157 1.157.157 1.252.157 1.374.157 1.563.157 1.752.157 S R ± .012± .004 1.000 .717 T + .004 S – .000± .012 .126 1.000 1.280 .969 1.3781.063 .126 1.280 .126 1.378 1.181 .906 1.280 .969 1.4961.157 1.6141.252 1.7521.374 2.0001.563 2.2441.752 .126 1.181 .126 1.280 .126 1.496 .126 1.614 .146 1.752 .146 2.000 .169 2.244 .169 2.500 T KK + .004 Max.– .000 .626 .126 .756 .126 .882 .126 .882 .126 1.008.126 1.142.126 1.268.126 1.390.146 1.630.146 1.882.169 KK Ma .6 .7 .8 .8 1.0 1.1 1.2 1.3 1.6 1.8 .947 1.469 2.346 .947 2.579 .947 .157 2.579 1.937.157 2.185.157 2.5001.937 2.7522.185 .169 2.752 2.063.169 2.323.169 2.3 M + 0.4 L – 0.0 ± 0.3 N M + 0.00+ 0.4 – 0.15– 0.0 N P + 0.00 ± 0.2– 0.15 R P ± 0.1 ± 0.2 S R ± 0.3 ± 0.1 T + 0.1 S – 0.0 ± 0.3 T KK + 0.1 Max. – 0.0 KK Ma 18.2 27.6 18.2 27.6 18.2 27.6 21.5 33.8 23.0 33.8 23.0 33.8 23.0 33.8 23.0 33.8 24.1 35.7 24.1 37.3 18.2 18.2 24.6 18.2 27.4 18.2 27.4 21.5 30.8 23.0 34.2 23.0 37.4 23.0 40.9 23.0 46.7 24.1 53.4 24.1 59.6 24.1 24.1 37.3 37.3 40 24.1 37.3 65.5 24.1 All dimensions for reference only. All dimensions for reference only. 40 N P + .000 ± .008– .006 .110 .717 2.8 3.2 3.2 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 18.2 24.6 27.4 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5 43 26 18.2 2.8 23.0 3.2 24.6 3.2 24.6 3.2 27.0 4.0 29.4 4.0 31.8 4.0 34.9 4.0 39.7 4.0 44.5 4.0 49.2 4.0 55.5 4.0 43 25.4 18.2 30.0 23.0 32.5 24.6 32.5 24.6 35.0 27.0 38.0 29.4 41.0 31.8 44.5 34.9 50.8 39.7 57.0 44.5 63.5 49.2 69.9 55.5 3.2 3.2 3.2 3.2 3.2 25.4 30.0 32.5 32.5 35.0 3.2 38.0 3.7 44.5 4.3 57.0 4.3 69.9 3.2 3.7 4.3 41.0 50.8 63.5 15.9 3.2 19.2 3.2 22.4 3.2 22.4 3.2 25.6 3.2 29.0 3.2 32.2 3.2 35.3 3.7 41.4 3.7 47.8 4.3 52.4 4.3 59.0 4.3 2.0 15.9 19.2 22.4 22.4 25.6 29.0 32.2 35.3 41.4 47.8 52.4 59.0 GT030 square flange receptacle for rear panel mounting • Four through mounting holes or optional threaded holes • Threaded rear to accept accessory attachment • Environment proof when mounted with a proper sealing gasket (see page 80) M T R S P N B L R S Table 1: Inches Shell Size 10SL B Thread Class 2A   .6250-24UNEF L ± .012 1.087 M + .016 – .000 .717 N + .000 – .006   .717 P ± .008 .110 R ± .004   .717 S ± .012 1.000 T + .004 – .000 .126 16S   .8750-20UNEF 1.087 .717 1.079 .126   .969 1.280 .126 14S 16 18 20 22 24 28 32 36 40   .7500-20UNEF   .8750-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.6250-18UNEF 1.8750-16UN 2.0625-16UN 2.3125-16UN 1.087 1.331 1.331 1.331 1.331 1.406 1.406 1.469 1.469 1.469 .717   .969 .846 1.079 .907 1.213 .907 1.346 .907 1.472 .907 1.610 .947 1.839 .947 2.102 .947 2.346 .947 2.579 .126   .906 .126 1.181   .969 .157 1.280 1.063 .157 1.378 1.157 .157 1.496 1.252 .157 1.614 1.374 .157 1.752 1.563 .157 2.000 1.752 .157 2.244 1.937 .157 2.500 2.185 2.752 .126 .126 .126 .126 .126 .146 .146 .169 .169 .169 Table 2: Millimeters Shell Size 10SL L ± 0.3 27.6 M + 0.4 – 0.0 18.2 N + 0.00 – 0.15 18.2 P ± 0.2 2.8 R ± 0.1 18.2 S ± 0.3 25.4 T + 0.1 – 0.0 3.2 16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 14S 16 18 20 22 24 28 32 36 40 27.6 33.8 33.8 33.8 33.8 33.8 35.7 37.3 37.3 37.3 18.2 21.5 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05 24.6 3.2 27.4 3.2 30.8 4.0 34.2 4.0 37.4 4.0 40.9 4.0 46.7 4.0 53.4 4.0 59.6 4.0 65.5 4.0 All dimensions for reference only. 27 23.0 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.5 30.0 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 GT030A square flange receptacle for rear panel mounting • • • • Four through mounting holes or optional threaded holes Backshell included for accessory attachment Without a wire sealing grommet and cable clamp Non-environment proof M T R S P B N F K R S L Inches Shell Size B Thread Class 2A 10SL .6250-24 UNEF 16S .8750-20 UNEF 18 1.0000-20 UNEF 22 1.1875-18 UNEF 14S 16 20 24 28 32 36 40 F Min. K Min. .520 .374 .409 .7500-20 UNEF .8750-20 UNEF M + .016 – .000 1.969 .717 .906 1.181 1.079 .126 .969 1.280 .126 .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 2.362 .907 1.472 .157 1.252 1.614 .126 .374 .374 1.094 .374 2.560 1.7500-18 UNS 1.488 .433 2.560 1.228 .374 1.780 .465 2.016 .465 .846 2.362 1.4375-18 UNEF 2.2500-16 UN .126 .717 .907 .907 2.560 .947 .947 3.150 .947 3.150 .947 .969 1.079 1.346 1.610 1.839 2.102 2.346 2.579 .110 .717 .126 .969 .157 1.157 .157 1.374 .157 1.563 .157 1.752 .157 1.937 .157 2.185 1.000 T + .004 – .000 1.969 .965 2.0000-18 UNS S ± .012 .374 .867 1.4375-18 UNEF R ± .004 .638 2.362 .717 P ± .008 1.969 .374 .717 N + .000 – .006 .374 .638 1.1875-18 UNEF L Max. 1.280 1.496 1.752 2.000 2.244 2.500 2.752 .126 .126 .126 .126 .146 .146 .169 .169 .169 Millimeters Shell Size F Min. K Min. L Max. 14S 13.2 9.5 50 10SL 16S 16 18 20 22 24 28 32 36 40 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T + 0.1 – 0.0 18.20 24.6 3.2 23.0 30.0 3.2 50 18.20 50 18.20 60 60 60 60 65 65 18.2 27.4 21.50 27.4 23.05 30.8 23.05 34.2 23.05 37.4 23.05 40.9 24.05 46.7 2.8 3.2 3.2 4.0 4.0 4.0 4.0 4.0 18.2 24.6 24.6 27.0 29.4 31.8 34.9 39.7 25.4 32.5 32.5 35.0 38.0 41.0 44.5 50.8 3.2 3.2 3.2 3.2 3.2 3.2 3.7 3.7 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3 45.2 11.8 80 24.05 59.6 All dimensions for reference only. 46 28 4.0 49.2 63.5 4.3 GT030AF/030F square flange receptacle for rear panel mounting GT030AF • Includes a cable clamp • Wire sealing grommet not included • Non-environment proof • Four through mounting holes or optional threaded holes GT030F • Includes a wire sealing grommet and cable clamp • For use with individual wires • Environment proof • Four through mounting holes or optional threaded holes M T R S P N Z KK L R LL S Inches Shell Size L Max. M + .016 – .000 2.440 .717 S ± .012 T + .004 – .000 .906 1.181 .126 16S 2.756 .717 1.079 .126 .969 18 3.031 .907 1.213 .157 1.063 .157 1.252 20 22 24 28 32 36 40 2.756 3.031 3.031 3.346 3.346 3.346 4.134 5.118 .846 .907 .907 .907 .947 .947 .947 .947 .969 1.079 1.346 1.472 1.610 1.839 2.102 2.346 2.579 .110 R ± .004 2.362 16 .717 P ± .008 10SL 14S .717 N + .000 – .006 .126 .126 .157 .157 .157 .157 .157 .157 .717 .969 1.157 1.374 1.563 1.752 1.937 2.185 1.000 1.280 1.280 1.378 1.496 1.614 1.752 2.000 2.244 2.500 2.752 .126 .126 .126 .126 .126 .126 .146 .146 .169 .169 .169 Z Nominal KK Max. LL Max. .312 1.083 4.720 .437 1.181 .220 .437 .562 .625 .625 .750 .750 .937 1.250 1.375 .894 1.181 1.300 1.476 1.476 1.705 1.705 2.035 2.283 2.579 4.720 4.720 4.921 4.921 4.921 4.921 4.921 4.921 4.921 5.315 5.709 Millimeters Shell Size L Max. 14S 62 10SL 60 M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T + 0.1 – 0.0 18.20 24.6 3.2 23.0 30.0 3.2 18.20 18.2 2.8 18.2 25.4 3.2 Z Nominal 5.58 7.92 KK Max. LL Max. 27.5 120 22.7 120 16S 70 18.20 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120 18 77 23.05 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125 16 20 22 24 28 32 36 40 70 77 77 85 85 85 105 130 21.50 23.05 23.05 23.05 24.05 24.05 24.05 24.05 27.4 34.2 37.4 40.9 46.7 53.4 59.6 65.5 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 24.6 29.4 31.8 34.9 39.7 44.5 49.2 55.5 All dimensions for reference only. 47 29 32.5 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 11.09 15.87 15.87 19.05 19.05 23.79 31.75 34.92 30.0 37.5 37.5 43.3 43.3 51.7 58.0 65.5 125 125 125 125 125 125 135 145 GT030G square flange receptacle for rear panel mounting • • • • Four through mounting holes or optional threaded holes With wire sealing grommet for individual wires Includes backshell for use with heat-shrink tubing Environment proof M T R P N S Z BB JJ KK J R K S L Inches Shell Size J ± .008 K ± .020 14S .138 .461 10SL 16S 16 .138 .138 .138 L Max. M + .016 – .000 N + .000 – .006 P ± .008 R ± .004 S ± .012 T + .004 – .000 Z Min. BB Max. JJ ± .008 KK ± .008 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791 .461 1.969 .461 1.969 .453 2.362 .717 .717 .110 .717 .717 1.079 .126 .969 .846 1.079 .126 .941 1.157 1.496 .126 .736 1.031 1.165 1.374 1.752 .146 .969 1.358 1.488 1.213 .157 1.063 22 .138 .500 2.559 .907 1.472 .157 1.252 24 28 32 36 40 .138 .138 .138 .138 .138 .500 .500 .598 .598 .610 2.559 2.559 2.756 3.150 3.150 .907 .947 .947 .947 .947 1.346 1.610 1.839 2.102 2.346 2.579 .157 .157 .157 1.563 .157 1.752 .157 1.937 1.57 .941 .862 .907 .907 .862 .610 .531 2.362 2.559 .531 .524 .126 .453 .500 .126 .303 1.280 .138 .138 1.280 .126 .969 18 20 1.000 2.185 1.378 1.614 2.000 2.244 2.500 2.752 .126 .126 .575 .819 .862 1.031 .941 1.165 .669 .925 .925 1.043 1.189 1.323 1.421 .146 1.063 1.358 1.488 1.630 .169 1.516 1.717 1.882 2.157 .169 .169 1.311 1.898 1.717 2.071 1.882 2.276 1.913 2.402 Millimeters M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T + 0.1 – 0.0 Z Min. B Max. JJ ± 0.2 KK ± 0.2 Shell Size J ± 0.2 K ± 0.5 L Max. 14S 3.5 11.7 50 18.20 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1 3.5 11.5 60 21.50 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5 10SL 16S 16 18 20 22 24 28 32 36 40 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 12.7 12.7 12.7 12.7 15.2 15.2 15.5 50 50 60 65 65 65 65 70 80 80 18.20 18.20 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05 18.2 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5 2.8 18.2 3.2 24.6 4.0 27.0 4.0 29.4 4.0 31.8 4.0 34.9 4.0 39.7 4.0 44.5 4.0 49.2 4.0 55.5 All dimensions for reference only. 48 30 25.4 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 7.7 13.5 14.6 18.7 20.8 24.6 27.0 33.3 38.5 48.2 13.3 21.9 21.9 26.2 26.2 34.5 34.5 43.6 43.6 52.6 15.5 23.9 23.9 29.6 29.6 37.8 37.8 47.8 47.8 57.8 17.0 23.5 26.5 30.2 33.6 36.1 41.4 48.6 54.8 61.0 GT030R square flange receptacle for rear panel mounting • • • • Four through mounting holes or optional threaded holes With a wire sealing grommet for individual wires Includes backshell for conduit termination Environment proof M T R S P B N F K R S L Inches Shell Size B Thread Class 2A 10SL .6250-24 UNEF 16S .8750-20 UNEF 18 1.0000-20 UNEF 22 1.1875-18 UNEF 14S 16 20 24 28 32 36 40 F Min. K Min. .520 .374 .409 .7500-20 UNEF .8750-20 UNEF M + .016 – .000 1.969 .717 .906 1.181 1.079 .126 .969 1.280 .126 .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 2.362 .907 1.472 .157 1.252 1.614 .126 .374 .374 1.094 .374 2.560 1.7500-18 UNS 1.488 .433 2.560 1.228 .374 1.780 .465 2.016 .465 .846 2.362 1.4375-18 UNEF 2.2500-16 UN .126 .717 .907 .907 2.560 .947 .947 3.150 .947 3.150 .947 .969 1.079 1.346 1.610 1.839 2.102 2.346 2.579 .110 .717 .126 .969 .157 1.157 .157 1.374 .157 1.563 .157 1.752 .157 1.937 .157 2.185 1.000 T + .004 – .000 1.969 .965 2.0000-18 UNS S ± .012 .374 .867 1.4375-18 UNEF R ± .004 .638 2.362 .717 P ± .008 1.969 .374 .717 N + .000 – .006 .374 .638 1.1875-18 UNEF L Max. 1.280 1.496 1.752 2.000 2.244 2.500 2.752 .126 .126 .126 .126 .146 .146 .169 .169 .169 Millimeters Shell Size F Min. K Min. L Max. 14S 13.2 9.5 50 10SL 16S 16 18 20 22 24 28 32 36 40 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T + 0.1 – 0.0 18.20 24.6 3.2 23.0 30.0 3.2 50 18.20 50 18.20 60 60 60 60 65 65 18.2 27.4 21.50 27.4 23.05 30.8 23.05 34.2 23.05 37.4 23.05 40.9 24.05 46.7 2.8 3.2 3.2 4.0 4.0 4.0 4.0 4.0 18.2 24.6 24.6 27.0 29.4 31.8 34.9 39.7 25.4 32.5 32.5 35.0 38.0 41.0 44.5 50.8 3.2 3.2 3.2 3.2 3.2 3.2 3.7 3.7 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3 45.2 11.8 80 24.05 59.6 All dimensions for reference only. 50 31 4.0 49.2 63.5 4.3 GT030RV square flange receptacle for rear panel mounting • • • Four through mounting holes or optional threaded holes With wire sealing grommet for individual wires Environment proof M T R P N S KK R L S Inches Shell Size L Max. M + .016 – .000 1.890 .717 10SL 1.890 16S 1.890 14S .717 .717 N + .000 – .006 .717 .969 1.079 P ± .008 .110 .126 .126 16 2.205 .846 1.079 .126 20 2.244 .907 1.346 .157 18 22 24 28 32 36 40 2.244 2.244 2.244 2.244 2.362 2.362 2.362 .907 .907 .907 .947 .947 .947 .947 1.213 1.472 1.610 1.839 2.102 2.346 2.579 R ± .004 S ± .012 T + .004 – .000 .906 1.181 .126 .717 .969 .969 1.000 1.280 1.280 .126 KK Max. .787 .945 .126 1.024 .126 1.024 .157 1.063 1.378 .126 1.161 .157 1.252 1.614 .126 1.417 .157 .157 .157 .157 .157 1.157 1.374 1.563 1.752 1.937 2.185 1.496 1.752 2.000 2.244 2.500 2.752 .126 .146 .146 .169 .169 .169 1.299 1.575 1.811 2.028 2.283 2.539 Millimeters M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 23.0 Shell Size L Max. 14S 48.0 18.20 24.6 3.2 16 56.0 21.50 27.4 3.2 10SL 16S 18 20 22 24 28 32 36 40 48.0 48.0 57.0 57.0 57.0 57.0 57.0 60.0 60.0 60.0 18.20 18.20 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05 18.2 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5 2.8 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 All dimensions for reference only. 51 32 18.2 24.6 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.5 S ± 0.3 T + 0.1 – 0.0 KK Max. 30.0 3.2 24.0 25.4 32.5 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 20.0 26.0 26.0 29.5 33.0 36.0 40.0 46.0 51.5 58.0 64.5 GT06A straight plug • Without grommet and cable clamp • Without If a cablegrommet clamp isand required, see pages 82 and 84 • cable clamp • If Non-environment proof • a cable clamp is required, see pages 84 and 86 • Non-environment B F K L Q Inches Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 14S 16 .7500-20UNEF .8750-20UNEF F Min. K Min. .520 .374 .409 .638 .638 L Max. Q Max. 1.969 1.150 .374 1.969 .374 1.969 .374 2.362 .898 1.260 1.260 18 1.0000-20UNEF .756 .374 2.362 1.437 22 1.1875-18UNEF .965 .374 2.362 1.697 20 24 28 32 36 40 1.1875-18UNEF .867 1.4375-18UNEF 1.094 1.7500-18UNS 1.488 1.4375-18UNEF 2.0000-18UNS 2.2500-16UN 1.228 1.780 2.016 .374 2.362 .374 2.560 .374 2.560 .433 2.560 .465 3.150 .465 3.150 1.571 1.835 2.102 2.366 2.610 2.850 Millimeters Shell Size F Min. K Min. L Max. Q Max. 14S 13.2 9.5 50 29.2 10SL 16S 16 18 20 22 24 28 32 36 40 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 37.8 45.2 51.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 11.0 11.8 11.8 All dimensions for reference only. 52 33 50 50 60 60 60 60 65 65 65 80 80 22.8 32.0 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.4 GT06AF/06F straight plug GT06AF • With a cable clamp • Wire sealing grommet not supplied • Non-environment proof GT06F • With a wire sealing grommet and cable clamp • For use with individual wires • Environment proof Z L Q LL Inches Shell Size L Max. Q Max. Z Nominal KK Max. 2.362 1.150 .312 1.083 4.724 2.756 1.260 .437 1.181 4.921 10SL 2.165 16S 2.756 14S 16 18 20 22 24 28 32 36 40 2.953 2.953 2.953 3.543 3.543 3.543 3.937 4.921 .898 .220 1.260 .437 1.437 .562 1.571 .625 1.697 .625 1.835 .750 2.102 .750 2.366 .937 2.610 1.250 2.850 1.375 .894 1.181 1.299 1.476 1.476 1.705 1.705 2.035 2.283 2.579 LL Max. 4.724 4.724 4.921 4.921 4.921 4.921 4.921 4.921 5.315 5.709 Millimeters Shell Size L Max. Q Max. Z Nominal KK Max. LL Max. 14S 60 29.2 7.92 27.5 120 10SL 55 22.8 5.58 22.7 120 16S 70 32.0 11.09 30.0 120 18 75 36.5 14.27 33.0 125 16 20 22 24 28 32 36 40 70 75 75 90 90 90 100 125 32.0 11.09 39.9 15.87 43.1 15.87 46.6 19.05 53.4 19.05 60.1 23.79 66.3 31.75 72.4 34.92 All dimensions for reference only. 53 34 30.0 37.5 37.5 43.3 43.3 51.7 58.0 65.5 125 125 125 125 125 125 135 145 KK GT06CF straight plug • • • With a cable clamp and seal For use with jacketed cable Environment proof L Z J Cable jacket Strip length Q Inches Shell Size J Approx. L Approx. Q Max. Open 14S .732 2.898 1.150 .438 3.216 1.260 10SL 16S 16 18 20 22 24 28 .551 2.752 .732 .898 2.898 .653 .705 1.260 3.307 .705 1.437 3.311 .744 1.571 3.350 .689 1.697 3.484 .921 1.835 3.736 2.102 Z .312 Closed .094 .230 .531 .315 .531 .315 .625 .378 .748 .445 .748 .445 .937 .610 .937 .610 32 1.016 4.142 2.366 1.250 .921 40 1.614 4.640 2.854 1.624 1.177 36 1.031 4.390 2.610 1.378 .921 Millimeters Shell Size 10SL J Approx. 14.0 L Approx. 69.6 Q Max. Open 22.8 7.93 Z Closed 2.38 14S 18.6 73.6 29.2 11.12 5.84 16 16.6 81.7 32.0 13.48 8.00 16S 18 20 22 24 28 18.6 17.9 17.9 18.9 17.5 23.4 73.6 32.0 84.0 36.5 84.1 39.9 85.1 43.1 88.5 46.6 94.9 53.4 13.48 15.87 8.00 9.60 19.00 11.30 23.80 15.50 19.00 23.80 11.30 15.50 32 25.8 105.2 60.1 31.75 23.40 40 41.0 111.5 72.5 41.25 29.90 36 26.2 111.5 66.3 All dimensions for reference only. 54 35 35.00 23.40 OPEN CLOSED GT06G straight plug • • • • With a wire sealing grommet For use with individual wires Includes a backshell for use with heat-shrink tubing Environment proof Z BB JJ KK J K Q L Inches Shell Size J ± .008 K ± .020 14S .138 .461 10SL 16S 16 18 20 22 24 28 32 36 40 .138 .138 .138 .138 .138 .138 .138 L Max. Q Max. Z Min. BB Max. JJ ± .008 KK ± .008 1.969 1.150 .417 .669 .752 .791 2.362 1.260 .461 1.969 .461 1.969 .453 .453 .500 .500 .500 2.362 2.559 2.559 2.559 .898 1.260 1.437 1.571 1.697 1.835 .303 .531 .531 .575 .138 .598 3.150 2.610 1.516 .138 .610 3.150 2.854 1.311 1.898 1.358 1.717 1.717 2.071 .925 1.165 1.323 1.488 1.063 .925 1.043 1.358 1.031 .669 .941 .969 2.102 2.366 .862 .941 1.165 2.559 2.756 .862 .941 1.031 .819 .500 .598 .862 .610 .736 .138 .138 .524 1.488 1.882 1.882 2.276 1.189 1.421 1.630 1.913 2.157 2.402 Millimeters Shell Size J ± 0.2 K ± 0.5 L Max. Q Max. Z Min. BB Max. JJ ± 0.2 KK ± 0.2 14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5 10SL 16S 16 18 20 22 24 28 32 36 40 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 11.7 11.7 11.5 12.7 12.7 12.7 12.7 15.2 15.2 15.2 50 50 60 65 65 65 65 70 80 80 22.8 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.5 All dimensions for reference only. 56 36 7.7 13.5 14.6 18.7 20.8 24.6 27.0 33.3 38.5 48.2 13.3 21.9 21.9 26.2 26.2 34.5 34.5 43.6 43.6 52.6 15.5 23.9 23.9 29.6 29.6 37.8 37.8 47.8 47.8 57.8 17.0 23.5 26.5 30.2 33.6 36.1 41.4 48.6 54.8 61.0 GT06AMI/GT06RMI straight plug AMI RMI • Long adapter with internal PG/Metric thread* • Wire sealing grommet not supplied • Non-environmental • Long adapter with internal PG/Metric thread* • With wire sealing grommet • Environment proof PG/METRIC PG THREAD THREAD L Q Inches Shell Size 10SL L Ref. 2.873 16S 2.904 14S 16 18 20 22 24 28 32 36 40 Q Max.   .898 2.904 1.150 3.291 1.299 3.406 3.391 3.395 3.470 3.604 3.751 3.795 3.795 1.299 1.437 1.571 1.697 1.835 2.102 2.366 2.610 2.850 Millimeters Shell Size 10SL L Ref. 73.0 Q Max. 22.8 16S 73.8 32.0 14S 16 18 20 22 24 28 32 36 40 73.8 83.6 86.5 86.1 86.2 88.1 91.5 95.3 96.4 96.4 All dimensions for reference only. *Refer to page 87 37 29.2 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.5 GT06R straight plug • • • With a wire sealing grommet Includes a backshell for conduit termination Environment proof B F K L Q Inches Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 14S 16 .7500-20UNEF .8750-20UNEF F Min. K Min. .520 .374 .409 .638 .638 L Max. Q Max. 1.969 1.150 .374 1.969 .374 1.969 .374 2.362 .898 1.260 1.260 18 1.0000-20UNEF .756 .374 2.362 1.437 22 1.1875-18UNEF .965 .374 2.362 1.697 20 24 28 32 36 40 1.1875-18UNEF .867 1.4375-18UNEF 1.094 1.7500-18UNS 1.488 1.4375-18UNEF 2.0000-18UNS 2.2500-16UN 1.228 1.780 2.016 .374 2.362 .374 2.560 .374 2.560 .433 2.560 .465 3.150 .465 3.150 1.571 1.835 2.102 2.366 2.610 2.850 Millimeters Shell Size F Min. K Min. L Max. Q Max. 14S 13.2 9.5 50 29.2 10SL 16S 16 18 20 22 24 28 32 36 40 10.4 16.2 16.2 19.2 22.0 24.5 27.8 31.2 37.8 45.2 51.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 11.0 11.8 11.8 All dimensions for reference only. 64 38 50 50 60 60 60 60 65 65 65 80 80 22.8 32.0 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.4 GT06RV straight plug • • • With a wire sealing grommet For use with individual wires Environment proof KK Q L Inches Shell Size L Max. 10SL 1.417 16S 1.437 1.260 1.024 18 1.929 1.437 1.161 14S 16 20 22 24 28 32 36 40 Q Max. .898 1.437 1.150 1.929 1.260 1.969 1.571 1.969 1.697 2.008 1.835 2.008 2.102 2.087 2.366 2.106 2.610 KK Max. .787 .945 1.024 1.299 1.417 1.543 1.811 2.028 2.283 2.126 2.850 2.539 Shell Size L Max. Q Max. KK Max. 10SL 36.0 22.8 20.0 16S 36.5 32.0 26.0 Millimeters 14S 16 18 20 22 24 28 32 36 40 36.5 29.2 49.0 32.0 49.0 36.5 50.0 39.9 50.0 43.1 51.0 46.6 51.0 53.4 53.0 60.1 53.5 66.3 54.0 72.4 All dimensions for reference only. 65 39 24.0 26.0 29.5 33.0 36.0 40.0 46.0 51.5 58.0 64.5 GT06SB straight plug • • • For termination of shielded braid and heatshrink tube or boot. With individual wire sealing grommet Environment proof .138 REF C F E R D Q L Inches Shell Size C Min. D Max. E Max. 14S .417 .786 .873 10SL 16S 16 18 20 22 24 .303 .531 .531 .637 .641 F Ref. L Ref. Q Max. 2.049 1.150 .775 .625 2.034 .905 1.025 .875 2.049 1.299 1.023 .965 1.147 1.000 2.552 1.437 1.160 .905 .750 1.025 .875 2.505 .898 1.299 .736 1.122 1.305 1.125 2.552 1.571 .981 1.364 1.521 1.375 2.632 1.835 .819 R Max. 1.196 1.373 1.250 2.418 1.697 .786 .944 1.023 1.296 1.416 1.562 28 1.067 1.476 1.657 1.500 2.566 2.102 1.806 36 1.631 2.007 2.207 2.062 2.676 2.610 2.281 32 40 1.311 1.882 1.732 2.283 1.927 1.750 2.486 2.312 2.628 2.628 2.366 2.850 2.027 2.538 Millimeters Shell Size C Min. D Max. E Max. 14S 10.6 20.0 22.2 16 13.5 10SL 16S 18 20 22 24 28 32 36 40 7.7 13.5 16.2 18.7 20.8 24.9 27.1 33.3 41.4 47.8 16.3 23.0 23.0 24.5 28.5 30.4 34.6 37.5 44.0 51.0 58.0 F Ref. L Ref. Q Max. R Max. 52.0 29.2 24.0 19.7 15.9 51.7 26.0 22.2 52.0 19.1 26.0 22.2 29.1 25.4 33.1 28.6 34.9 31.8 38.6 34.9 42.5 38.1 48.9 44.5 56.1 52.4 63.1 58.7 All dimensions for reference only. 66 40 63.6 64.8 64.8 61.4 66.8 65.2 66.8 68.0 66.8 22.8 32.0 32.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.5 20.0 26.0 26.0 29.5 32.9 36.0 39.7 45.9 51.5 57.9 64.5 GT07R jam nut receptacle • • • For rear panel single hole mounting Panel seal O-ring included Environment proof M S J G P G S N B O-Ring R Inches J Wall Thickness B Thread Class 2A G ± .012 Min. 14S 1.1250-18 UNEF .575 .094 16 1.2500-18 UNEF Shell Size 10SL 16S 18 20 22 24 28 32 36 40 .8750-20 UNEF .441 1.2500-18 UNEF .094 .618 .094 .618 1.3750-18 UNEF .094 .661 1.5000-18 UNEF .094 .709 1.6250-18 UNEF .094 .795 1.7500-18 UNEF .094 .795 2.0000-18 UNS 2.2500-16 UN .094 2.7500-16 UN N + .000 – .006 P ± .007 R ± .016 S ± .012 .295 1.055 .969 .189 1.312 1.626 .295 1.264 .205 .295 .354 .358 .358 .358 .965 .717 1.055 1.079 1.327 1.213 1.327 1.327 1.327 1.079 1.346 1.472 1.610 .157 1.062 .189 1.500 .189 1.500 .189 1.562 .189 1.750 .189 2.000 .189 2.000 1.252 1.748 1.748 1.875 2.000 2.134 2.252 .886 .094 .394 1.386 1.839 .220 2.188 2.500 1.059 .094 .327 1.386 2.346 .220 2.812 3.000 .972 2.5000-16 UN Max. M ± .012 .094 1.165 .094 .394 .327 1.386 1.386 2.102 .220 2.579 2.438 .220 2.953 2.748 3.248 Millimeters J Wall Thickness Max. M ± 0.3 N + 0.00 – 0.15 P ± 0.2 R ± 0.4 S ± 0.3 2.4 7.5 26.8 24.6 4.8 33 41.3 2.4 7.5 Shell Size G ± 0.3 Min. 14S 14.6 16 15.7 10SL 16S 11.2 15.7 2.4 2.4 5.2 7.5 24.5 18.2 26.8 27.4 32.1 44.4 34.2 4.8 44 50.8 9.0 33.7 30.8 22 20.2 2.4 9.1 33.7 37.4 24 28 20.2 22.5 2.4 2.4 9.1 9.1 10.0 33.7 33.7 51 54.2 57.2 56 63.5 35.2 59.6 5.6 71 76.2 10.0 35.2 40 29.6 2.4 8.3 35.2 8.3 4.8 51 47.6 5.6 2.4 2.4 4.8 40 46.7 24.7 26.9 40.9 4.8 35.2 32 36 44.4 38 2.4 2.4 38 31.8 4.8 16.8 18.0 4.8 27 27.4 18 20 4.0 53.4 65.5 All dimensions for reference only. 69 41 5.6 5.6 62 75 69.8 82.5 GT070 jam nut receptacle • • • For rear panel single hole mounting Threaded rear for accessories Environment proof L M S J G P G S N BB B O-Ring R Inches Shell Size 10SL 14S B Thread Class 2A G ± .012 1.1250-18 UNEF .575 .8750-20 UNEF 16S 1.2500-18 UNEF 18 1.3750-18 UNEF 16 20 22 24 28 32 36 40 1.2500-18 UNEF 1.5000-18 UNEF 1.6250-18 UNEF 1.7500-18 UNEF 2.0000-18 UNS 2.2500-16 UN 2.5000-16 UN 2.7500-16 UN .441 .618 .618 .661 .709 .795 .795 J Wall Thickness M ± .012 N + .000 – .006 P ± .007 R ± .016 S ± .012 .969 .189 1.312 1.626 Min. Max. L ± .010 .094 .295 1.531 1.055 1.909 1.264 .094 .094 .094 .094 .094 .094 .094 .205 .295 .295 .354 .358 .358 .358 1.425 .965 1.531 1.941 1.941 1.953 1.748 .8750-20 UNEF 1.327 1.213 .189 1.562 1.875 1.0000-20 UNEF 1.327 1.472 .189 2.000 2.134 1.2500-18 UNEF 1.327 2.043 1.386 1.059 .094 .327 2.043 1.386 1.165 .094 .327 2.043 2.043 .6250-24 UNEF .7500-20 UNEF 1.500 .394 .394 1.252 .189 .094 .094 1.062 1.079 .886 .972 .157 1.055 1.327 1.941 .717 BB Thread Class 2A 1.079 .189 1.346 .189 1.610 .189 1.839 .220 1.500 1.750 2.000 2.188 1.748 2.000 2.252 2.500 .8750-20 UNEF 1.1250-18 UNEF 1.3750-18 UNEF 1.6250-18 UNEF 1.386 2.102 .220 2.438 2.748 1.8750-16 UN 1.386 2.579 .220 2.953 3.248 2.3125-16 UN 2.346 .220 2.812 3.000 2.0625-16 UN Millimeters J Wall Thickness Shell Size G ± 0.3 Min. 14S 14.6 2.4 10SL 16S 16 18 20 22 24 28 32 36 40 11.2 15.7 15.7 16.8 18.0 20.2 20.2 22.5 24.7 26.9 29.6 2.4 2.4 2.4 2.4 2.4 2.4 2.4 Max. L ± 0.3 M ± 0.3 N + 0.00 – 0.15 P ± 0.2 R ± 0.4 S ± 0.3 7.5 38.9 26.8 24.6 4.8 33 41.3 5.2 7.5 7.5 9.0 9.1 9.1 9.1 36.2 24.5 38.9 26.8 48.5 32.1 49.3 33.7 49.3 33.7 49.3 33.7 49.6 33.7 18.2 27.4 27.4 30.8 34.2 37.4 40.9 4.0 4.8 4.8 4.8 4.8 4.8 4.8 27 38 38 40 44 51 51 31.8 44.4 44.4 47.6 50.8 54.2 57.2 2.4 10.0 51.9 35.2 46.7 5.6 56 63.5 2.4 8.3 51.9 35.2 59.6 5.6 71 76.2 2.4 2.4 10.0 8.3 51.9 35.2 51.9 35.2 All dimensions for reference only. 70 42 53.4 65.5 5.6 5.6 62 75 69.8 82.5 GT08A 90° angle plug • • Without Without aa wire wiresealing sealinggrommet grommetor orclamp clamp • • Non-environment proof • • If aa cable cable clamp clampis isrequired, required,see seepages pages84 82and and86 84 Q L K J B F Inches Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 18 1.0000-20UNEF 22 1.1875-18UNEF 14S 16 20 24 28 32 36 40 .7500-20UNEF .8750-20UNEF 1.1875-18UNEF 1.4375-18UNEF 1.4375-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN F Max. J Min. .462 .370 .337 K Max. L Max. Q Max. 1.850 1.150 .370 1.181 1.772 .587 .370 1.181 1.890 1.299 .685 .370 1.378 2.283 1.437 .587 1.181 .370 .810 1.181 .370 .915 1.378 .370 1.025 1.447 2.598 1.575 .433 2.598 1.772 .496 1.923 2.402 1.575 .370 1.687 2.402 1.378 .370 1.139 2.244 2.835 1.969 .496 2.953 2.165 3.071 .898 1.299 1.571 1.697 1.835 2.102 2.366 2.610 2.850 Millimeters Shell Size 10SL F Max. J Min. K Max. L Max. Q Max. 8.5 9.4 30 45 22.8 14.9 9.4 30 48 33.0 14S 11.7 16 14.9 16S 18 20 22 24 28 32 36 40 17.4 20.5 23.2 26.0 28.9 9.4 30 9.4 30 9.4 35 9.4 35 9.4 35 9.4 40 9.4 40 36.7 11.0 45 48.8 12.6 55 42.8 12.6 50 All dimensions for reference only. 71 43 47 57 58 61 61 66 66 72 75 78 29.2 33.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.4 GT08AF/08F 90° angle plug GT08F • With a wire sealing grommet and cable clamp • For use with individual wires • Environment proof GT08AF • With a cable clamp • Wire sealing grommet not included • Non-environment proof L Q K LL KK Z Shell Size 10SL 14S K Max. 1.654 1.654 Inches L Max. Q Max. Z Max. KK Max. 1.850 1.150 .312 1.083 1.772 .898 .220 .894 LL Max. 3.937 3.937 16S 1.772 1.890 1.299 .437 1.181 3.937 18 2.087 2.283 1.437 .562 1.299 3.937 16 20 22 24 28 32 36 40 1.772 2.087 2.087 2.283 2.283 2.598 2.717 3.740 2.244 2.402 2.402 2.598 2.598 2.835 2.953 3.071 1.299 1.571 1.697 1.835 2.102 2.366 2.610 2.850 .437 .625 .625 .750 .750 .937 1.250 1.375 1.181 1.476 1.476 1.705 1.705 2.061 2.283 2.579 3.937 3.937 3.937 3.937 3.937 4.331 4.331 5.512 Millimeters Shell Size K Max. L Max. Q Max. Z Max. KK Max. LL Max. 14S 42 47 29.2 7.92 27.5 100 10SL 16S 16 18 20 22 24 28 32 36 40 42 45 45 53 53 53 58 58 66 69 95 45 48 57 58 61 61 66 66 72 75 78 22.8 5.58 33.0 11.09 36.5 14.27 33.0 39.9 43.1 46.6 53.4 60.1 66.3 72.4 All dimensions for reference only. 72 44 11.09 15.87 15.87 19.05 19.05 23.79 31.75 34.92 22.7 30.0 30.0 33.0 37.5 37.5 43.3 43.3 51.7 58.0 65.5 100 100 100 100 100 100 100 100 110 110 140 GT08R 90° angle plug • • • With a wire sealing grommet for conduit termination For use with individual wires Environment proof Q L K J B F Inches Shell Size B Thread Class 2A 10SL .6250-24UNEF 16S .8750-20UNEF 18 1.0000-20UNEF 22 1.1875-18UNEF 14S 16 20 .7500-20UNEF .8750-20UNEF 1.1875-18UNEF 24 1.4375-18UNEF 28 1.4375-18UNEF 32 1.7500-18UNS 36 2.0000-18UNS 40 2.2500-16UN F Max. J Min. .462 .370 .337 K Max. L Max. Q Max. 1.850 1.150 .370 1.181 1.772 .587 .370 1.181 1.890 1.299 .685 .370 1.378 2.283 1.437 .587 1.181 .370 .810 1.181 .370 .915 1.378 .370 1.025 1.447 2.598 1.575 .433 2.598 1.772 .496 1.923 2.402 1.575 .370 1.687 2.402 1.378 .370 1.139 2.244 2.835 1.969 .496 2.953 2.165 3.071 .898 1.299 1.571 1.697 1.835 2.102 2.366 2.610 2.850 Millimeters Shell Size 10SL F Max. J Min. K Max. L Max. 8.5 9.4 30 45 14.9 9.4 30 48 14S 11.7 16 14.9 16S 18 20 22 24 28 32 36 40 17.4 20.5 23.2 26.0 28.9 9.4 30 9.4 30 9.4 35 9.4 35 9.4 35 9.4 40 9.4 40 36.7 11.0 45 48.8 12.6 55 42.8 12.6 50 All dimensions for reference only. 76 45 Q Max. 22.8 47 29.2 57 33.0 58 61 61 66 66 72 75 78 33.0 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.4 GT05 dummy receptacle • • • Square flange Four through mounting holes Stows cable plugs when not in use M T R S P N R S Inches Shell Size M + .016 – .000 N + .000 – .006 P ± .008 R ± .004 S ± .012 14S .559 .969 .126 .906 1.181 10SL 16S 16 18 20 22 24 28 32 36 40 .559 .559 .748 .748 .748 .748 .811 .811 .874 .874 .874 .717 1.079 1.079 1.213 1.346 1.472 1.610 1.839 2.102 2.346 2.579 .110 .126 .126 .157 .157 .157 .157 .157 .157 .157 .157 .717 1.000 T + .004 – .000 .126 .126 .969 1.280 .126 1.063 1.378 .126 .969 1.157 1.252 1.374 1.563 1.752 1.937 2.185 1.280 1.496 1.614 1.752 2.000 2.244 2.500 2.752 .126 .126 .126 .146 .146 .169 .169 .169 Millimeters Shell Size M + 0.4 – 0.0 N + 0.00 – 0.15 P ± 0.2 R ± 0.1 S ± 0.3 T + 0.1 – 0.0 14S 14.2 24.6 3.2 23.0 30.0 3.2 10SL 14.2 18.2 2.8 18.2 25.4 3.2 16S 14.2 27.4 3.2 24.6 32.5 3.2 18 19.0 30.8 4.0 27.0 35.0 3.2 16 20 22 24 28 32 36 19.0 19.0 19.0 20.6 20.6 22.2 22.2 40 22.2 All dimensions for reference only. 27.4 34.2 37.4 40.9 46.7 53.4 59.6 65.5 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 77 46 24.6 29.4 31.8 34.9 39.7 44.5 49.2 55.5 32.5 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 GTTB thru-bulkhead receptacles • • Accepts mating plug on both sides Four through mounting holes P T R M N S N R S L Inches N + .000 – .006 .717 P ± .008 R ± .004 1.000 T + .004 – .000 .126 .126 .906 .969 1.280 .126 .157 1.063 1.378 .126 .157 1.252 1.614 .126 10SL 1.488 M + .016 – .000 .717 16S 1.488 .717 1.079 .126 .907 1.213 Shell Size 14S 16 18 20 22 24 28 32 36 40 L Max. 1.488 2.049 2.049 2.049 2.049 2.049 2.049 2.049 2.049 2.049 .717 .846 .907 .907 .907 .947 .947 .947 .947 .110 .969 1.079 .126 1.346 .157 1.472 1.610 .157 1.839 .157 2.102 .157 2.346 .157 2.579 .157 .717 .969 1.157 1.374 1.563 1.752 1.937 2.185 S ± .012 1.181 1.280 1.496 1.752 2.000 2.244 2.500 2.752 .126 .126 .126 .146 .146 .169 .169 .169 Millimeters Shell Size 10SL R ± 0.1 S ± 0.3 37.7 18.2 27.4 3.2 3.2 23.0 30.0 16 52.0 20 22 24 28 32 36 40 3.2 P ± 0.2 L Max. 37.7 18 32.5 37.7 N + 0.00 – 0.15 18.2 14S 16S 25.4 T + .004 – .000 3.2 M + 0.4 – 0.0 18.2 52.0 52.0 52.0 52.0 52.0 52.0 52.0 52.0 18.2 21.5 23.0 23.0 23.0 23.0 24.0 24.0 24.0 24.0 2.8 24.6 27.4 3.2 30.8 4.0 34.2 4.0 37.4 4.0 40.9 4.0 46.7 4.0 53.4 4.0 59.6 4.0 65.5 4.0 All dimensions for reference only. 78 47 18.2 24.6 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.5 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 GT Series Connectors ACA-B/GT insert availability Insert Arrangement 10SL-3 10SL-4† Service Rating Total Contacts A 2 A 14S-2 Inst. 14S-5 Inst. 14S-7 A 14S-4 14S-6 14S-9 3 6 A A 16S-4 D 16S-6 A A A 2 3 A 16-13 16-59 A A A 3 3 2 1 2 A/Inst. 10 18-4 D 4 18-5 18-6 18-7 D D D 1 1 7 18-9 Inst. 7 18-11 A 18-10 18-12 18-13 18-14 18-15 8 A 4 A 6 A A 4 2 4 18-17 Inst. 7 18-20 A 18-19 18-22 C 1 2 4 5 A 18-16 10 1 A 10 D 3 5 5 1 1 3 4 1 2 18-24 A/Inst. 10 10 18-30 A 5 5 18-29 18-31 A A 5 5 *Crimpcontacts contactsaccommodate accommodatewire wirethe the same size contact well wire of *Crimp same size asas thethe contact as as well as as wire of the the smaller, Arrangements identified with an asterisk are excepnextnext smaller, eveneven size.size. Arrangements identified with an asterisk (*) are(*) exceptions. tions. See arrangement insert arrangement drawings on55-77 pagesfor 6-28 for application wire size. See insert drawings on pages application wire size. A A A A A A A 20-79 A/D 22-2 D 4 2 2 22-12 10 3 3* 6 8 3 B D 22-13 D/A 22-15 E/A 22-14 3 7 D E A 7 1 2 7 3 6 3 1 1 8 3 2 13 13 11 2 E 3 14 4 E 3 3 6 2 1 2 5 19 6 7* 5 5 5* 1 1 2 2 3 4 5 11 7 4 1 2 3 2 8 12 7 17 1 4 13 17 A E Coax 4 19 2 22-7 0 3 19 2 D 1 2 D 22-5 22-11 48 3 3 22-10 2 A 3 6 A 22-9 5 A 1 9 20-51 22-8 5 A 4 13 22-6 3 A Inst. 22-4 5 A 3 16 8 5 9 20-30 22-1 10 A 6 14 20-66 5 A 2 9 A 20-59 1 A 1 7 20-27 20-58 6 A 2 2 13 20-57 5 A 12 4 8 Inst. 20-33 4 A 8 3 6 20-25 20-29 2 1 A 20-24 20-26 3 1 20-23 2 2 1 20-22 2 4 5 20-21 2 1 A D/A 1 4 8 20-14 20-20 2 2 B 18-8 2 3 4 18-1 18-3 1 1 D/A 0 3 13 20-19 5 D Contact Size 4 Inst. 20-18 3 5 3 D 1 20-11 20-17 3 D D Inst. 20-16 2 Service Rating Total Contacts 20-8 20-15 1 3 16-11 20-7 7 2 4 A 20-6 20-12 7 A 20-4 4 7 16-9 A 20-3 20-9 3 1 20-2 2 4 E 8 12 3 3 16-2 4 5 3 1 A 0 4 6 B 16-12 3 Inst. 16S-3 16-10 16 Insert Arrangement Coax 2 5 7 16-7 12 1 A 16S-8 8 1 14S-A7 16S-5 4 D Inst. 16S-1 0 4 14S-10 14S-12 Contact Size 2 4 2 4 5 3 1 19 1 arrangement available availableonly onlywith withpin pincontacts contactsinin receptacle and socket ††10SL-4 10SL-4 arrangement receptacle and socket contacts in plug contacts in plug. **Coaxial cable data can be found on insert arrangement drawings, pages 6-28. ** Coaxial cable data can be found on insert arrangement drawings, pages 55-77. For further information on coaxial contacts and cable see catalog 12-130. For further information on coaxial contacts call Amphenol Industrial at 888-364-9011. GT Series Connectors ACA-B/GT insert availability, cont. Insert Arrange ment 22-16 Service Rating A Total Contacts 9 22-17 D/A 22-19 A 14 A 3 22-18 22-20 22-21 22-22 D/A A A 22-23 D/A 22-27 D/A 22-24 22-28 22-33 22-34 22-63 D/A A D/A D A 22-65 D/A 22-80 A 22-70 24-2 24-3 24-5 24-6 24-7 24-9 24-10 24-11 24-12 A D D 9 4 A 24-27 24-28 24-51 24-52 24-53 24-58 24-59 24-60 24-65 E Inst. A Hi Volt. A 3 7 7 9 5 7 5 11 4 7 24 7 14 24-67 Inst. 19 24-75 A 7 24-79 24-80 A A Inst. 6 1 3 1 5 23 3 2 2 4 3 7* 7 7 4 8 12 8 Inst. 28 28-1 D/A 9 3 28-3 E 3 3 28-2 4 8 8 3 28-8 E/D/A 12 28-10 D/A 28-12 A 28-13 28-15 28-16 5 28-17 16 3 3 7 11 6 3 2 A 16 7* A 16 17 3 7* 6 2 5 32-4 A/D 14 32-6 A 23 32-3 D D 5 2 9 1 2 2 Inst./A 35 32-9 D 14 30 32-10 E/B/D/A 32-13 D 23 A 23 A/D D 7 9 32-7 A 12 16 E E/D 32-16 *Crimp size asas thethe contact asas well as as wire of the *Crimpcontacts contactsaccommodate accommodatewire wirethe thesame same size contact well wire of nextnext smaller, eveneven size.size. Arrangements identified with an asterisk (*) are(*) exceptions. the smaller, Arrangements identified with an asterisk are exceptions. See insert arrangement drawings on 55-77 pagesfor 6-28 for application wire size. See insert arrangement drawings on pages application wire size. 4 16 32-1 10 10 37 9 4 7 2 7 14 6 18 26 4 2 2 7 6 2 5 5 2 3 6 4 37 3 10 3 9 2 3 12 9 3 2 2 2 9 3 2 15 8 7 15 10 A 18 12 2 4 8 12 25 2 3 4 28 1 6 Coax** 20 A A 2 0 35 12 A 2 16 26 A Coax 6 15 28-AY 32-15 2 1 20 D 32-12 23 A 2 12 35 28-82 32-8 19 B/D/A A 32-5 4 B/D/A 28-59 32-2 7 A D 28-84 7 26 28-22 28-75 1 A 2 26 14 28-79 7 22 A 28-74 9 A A 3 7 28-20 28-72 9 12 12 28-66 12 D 8 2 2 C/D/A/Inst. 28-51 3 D 9 5 28-18 28-19 14 D 4 14 D 28-11 5 D 0 25 28-6 28-9 2 A 19 E/D 28-7 7 A 28-4 28-5 7* 5 24-96 24-AJ 24 7 7* Service Rating 24-84 8 Contact Size Total Contacts 28-21 3 5 15 24-71 2 7 5 A D 2 2 5 13 7 8 5 1 8 2 8 A 24-66 3* 7 A A 4 13 10 D 7 8* D 24-22 2 8 12 12 D 8 3 2 6 0 2 5 A 24-21 1 7 24-19 24-20 4 7 D/A D 3 16 9 1 9 24-16 24-17 12 Insert Arrange ment Coax** 14 6 16 A 8 1 8 A A 4 8 16 A 0 9 A D/A Contact Size 6 2 9 5 2 4 12 16 28 24 12 3 10 18 16 **Coaxial cable data data can can be befound foundon oninsert insertarrangement arrangementdrawings, drawings,pages pages55-77. 6-28. ** Coaxial cable For further see catalog 12-130. For furtherinformation informationononcoaxial coaxialcontacts contactsand callcable Amphenol Industrial at 888-364-9011. 3 49 ACA-B/GT GT Series Connectors insert availability, cont. Insert Arrangement 32-17 32-22 32-25 32-31 Service Rating Total Contacts A 54 A 31 D A 4 Inst. 48 32-53 E/Inst. 42 32-57 Coax 8 32-59 A 42 32-62 Coax 23 32-68 A 32-56 32-58 32-60 32-64 32-73 D A Coax A 8 Inst. 54 A 46 D 32-AF A 55 36-1 D 22 36-4 D/A 3 36-6 A 36-3 36-5 36-7 36-8 36-9 36-10 36-11 36-12 A 16 A 31 A 52 A 39 36-54 36-55 36-59 36-60 36-64 36-65 A A A Coax Coax 4 39 53 47 4 4 37 24 2 5 2 A 2 4 2 8 16 2 54 14 14 1 47 A 30 40-35 D 40-56 A 40-53 40-57 40-61 2 5 2 2 2 7 14 2 22 8* 7* A 61 40-74 40-75 40-80 A A A E 62 14 40-85 A 40 40-82 30 Coax 40-AD A 40-87 40-AG 40-AP 31 50 40 40-86 *Crimpcontacts contactsaccommodate accommodatewire wire the same size contact as well as of the *Crimp the same size as as thethe contact as well as wire wire the next smaller, even size. Arrangements identified with(*) anare asterisk (*) next of smaller, even size. Arrangements identified with an asterisk exceptions. are See insert arrangement drawings onapplication pages 6-28 forsize. applicaSeeexceptions. insert arrangement drawings on pages 55-77 for wire tion wire size. 4 50 E 8 38 2 A 43 40-AV D 3 A 29 1 3 13 40 14 7 1 7 3 24 24 16 60 55 60 61* 20 4 61 1 4 8 12 48 1 21 1 61 1 10 13 10 10 4 1 1 62* 62 60* 4 7 40-AT A 22 60 Inst. 40-AU 4 A 3 3 62 40-AR 40-AS 4 D 1 size 4/0 35 61 5 4 2 20 11 6 Coax** 85 4 21 A A 1 1 9 4 11 40-81 3 36 A 40 31 3* 11 40-73 52 8 61 A 40-72 35 A A 4 60 40-67 40-70 6 4 59 Coax 12 60 85 50 0 47 6 5 35 A A 3 29 Coax 40-68 15 E 5 40-64 40-66 48 A 3 16 35* 48 A A 12 20* 1 40-9 40-30 48 12 30 40-10 46 D D 40-62 40 35 A 7 7 A/D A 8 48* 20 40-1 40-5 18 20 C 36-AF 7 A 36-97 4 43 7 14 Coax 0 48 A 36-83 36-99 4 46 47 A Contact Size 7 A 36-79 36-85 53 44 D 36-80 Total Contacts A 36-77 36-78 15 7 7 1 36-75 36-76 48 34 A D 1 31 22 48 A Coax 36-74 31 Service Rating 36-73 40-63 4 47 36-52 36-51 3 17 D 36-71 12 4 16 36-22 8 12 55 48 47 4 54 19 48 A A 2 48 36-17 A 1 3 47 35 D 2 Insert Arrangement Coax** 1 size 4/0 47 D/A 36-20 4 A 36-15 36-18 4 4 A 1 2 4 A 0 12 A E/A 36-16 2 1 6 16 40 5 36-13 36-14 6 3 A 5 6* 6 A 6 9 19 D 2 16 A A 12 25 23 32-79 32-AM 4 8 4 Coax 32-82 4 30 32-75 32-76 0 25 32-48 32-52 Contact Size 4 3 7 4 38 2 size 4/0 3 3 4 7 1 10 25 24 15 18 3 size 2/0 1 **Coaxial cable data data can can be befound foundon oninsert insertarrangement arrangementdrawings, drawings,pages pages55-77. 6-28. ** Coaxial cable For further see catalog 12-130. For furtherinformation informationononcoaxial coaxialcontacts contactsand callcable Amphenol Industrial at 888-364-9011. ACA-B/GT GT Series Connectors insert insert alternate alternatepositioning positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: W As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. T X 250 280 16-7 20-16 22-18 24-4 24-28 18-9 20-22 22-21 24-6 28-1 18-5 B B A 20-20 A B B Insert Arrangement Degrees W X Y – 120 240 14S-7 90 180 270 16-9 35 110 250 325 16-11 35 110 250 325 – 280 215 290 10SL-4 63 14S-5 – 14S-2 14S-9 16-10 16-13 70 90 35 16S-1 80 16S-5 70 16S-4 16S-6 16S-8 35 90 180 110 – 110 145 180 215 290 270 250 250 270 35 110 250 35 70 145 110 – – – 265 18-4 18-10 145 – – 170 70 18-8 110 – – 18-1 18-3 – Z 215 250 – – – 325 325 – – 290 325 325 290 – 120 240 18-12 80 – – 280 18-20 90 270 – 18-29 90 18-11 18-15 18-22 – 170 265 – – – 120 240 70 145 215 290 180 180 270 – – 20-3 70 145 215 290 20-5 35 110 250 325 – 280 250 325 20-4 20-6 20-15 20-17 20-18 45 70 80 90 35 110 145 – 180 110 250 215 270 – 290 – Insert Arrangement 20-9 22-15 22-14 20-14 View looking into front face of pin insert or rear of socket insert. Degrees W X 250 325 250 325 180 270 20-23 35 110 250 20-24 20-27 20-29 20-33 110 35 110 35 110 80 – – – 250 – 22-4 35 110 250 22-8 22-9 22-10 22-11 22-13 22-20 22-22 35 35 110 – 110 80 – 80 24-10 80 24-96 110 35 24-2 24-27 110 35 80 24-22 110 35 22-28 24-11 145 35 35 24-9 110 70 22-23 22-27 110 250 250 215 250 250 250 250 250 – 250 – – – 280 290 250 22-5 325 215 110 145 325 280 35 70 – – 22-1 22-2 22-17 Z 90 35 22-16 Y 20-19 20-21 22-6 22-12 20-12 Position Z 22-3 20-7 20-8 A A Position Y 250 325 325 325 325 290 325 325 325 325 – – 280 280 – 280 – 280 35 110 250 35 110 250 80 – – 280 – 45 110 65 – 250 – 325 325 – – 28-2 35 110 250 325 28-5 35 110 250 325 28-3 28-6 70 145 70 145 5 51 Z 110 18-14 Position X Y 80 18-13 Position W Degrees 215 215 290 290 22-19 22-24 22-25 22-29 22-33 22-34 24-1 24-3 24-5 24-7 24-12 32-12 28-4 28-20 32-22 28-19 28-21 28-9 24-16 28-10 24-17 28-14 24-21 W 32-4 36-8 36-7 36-13 32-9 40-53 Degrees X 32-AF 36-1 32-6 28-15 32-13 32-1 32-3 28-11 24-20 32-10 28-17 28-8 24-14 Insert Arrangement 28-16 24-AJ Y Z 28-7 35 110 250 325 28-18 70 145 215 290 28-12 28-22 90 70 180 145 28-AY 45 110 32-5 35 110 32-2 32-7 32-8 32-15 32-17 32-25 32-64* 70 80 80 35 45 60 80 270 215 250 290 125 235 280 125 110 110 120 250 235 250 250 – 100 110 – – 36-3 70 145 215 36-5 – 120 240 80 125 235 36-4 70 36-6 35 36-10 80 36-9 36-14 36-15 36-AF 90 60 65 – 145 110 125 180 125 – – 215 225 70 130 230 40-56 40-AG 72 37 144 74 – 290 290 – 280 – 300 – 125 40-35 – 305 65 125 250 245 40-9 65 – – 280 270 235 40-10 280 235 130 – 280 325 65 33 325 250 40-1 40-5 – 215 30 30 290 145 32-68 32-82 – – – 270 225 310 216 285 310 290 288 322 *Additional rotations available; consult Amphenol for information. ACA-B/GT Connectors solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all solder con­tacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Gold plated contacts are also available. (See how to order, page 78 for ACA-B and page 79 for GT.) Pin/ Socket Mating End Size Wire Barrel Size Allowable Wire Size Test Current** Amps 16 Short† 16 16 18 20 22 13 10    7.5 5 16 Long 16 16 18 20 22 13 10    7.5 5 12 12 12 14 23 17 8 8 8 10 46 33 4 4 4 6 80 60 0 0 0 1 2 150 125 100 Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. † The 10SL, 14S and 16S connectors require short contacts. Table I MIL-SPEC CONTACT ARRANGEMENT SERVICE RATING MS Service Rating Inst. A D E B C Recommended Operating Voltage* at Sea Level DC 250 700 1250 1750 2450 4200 Effective Creepage Mechanical Distance Spacing AC (RMS) Nom. Nom. 200 500 900 1250 1750 3000 1/16 1/8 3/16 1/4 5/16 1 1/16 1/8 3/16 1/4 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be nec­essary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Table II ALTITUDE VOLTAGE DERATING** CHART Nominal Distance MS Service Rating Inst. A D E B C Airspace 1/32 Creepage 1/16 1/16 1/8 1/8 3/16 3/16 1/4 1/4 5/16 5/16 1 Standard Sea Level Conditions Pressure Altitude † 50,000 Feet Pressure Altitude † 70,000 Feet Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) 2800 2000  800 600 450 360 1400 3600 4500 5700 8500 1000 2800 3500 4500 7000  550  900 1000 1100 1300 † Not corrected for changes in density due to variations in temperature. 400 675 750 825 975 325 500 550 600 700 260 400 440 480 560 ** No attempt has been made to recommend operating voltages. The designer must determine his own oper­ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran­sients, surges, etc. 52 ACA-B/GT Connectors crimp contacts and application tools Machined from copper alloys and silver or gold plated for maximum corrosion resistance, with a mini­ mum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all insert arrangements and are identified based on part number call out. (See how to order, page 78 for ACA-B and page 79 for GT.) CRIMP CONTACTS CRIMP CONTACT DATA APPLICATION TOOLS PART NUMBER PIN CONTACT SILVER GOLD SOCKET CONTACT SILVER GOLD MATING SIZE WIRE WELL 10-40553 10-597160-1531 10-597109-161 10-597109-1631 10-606014-40 10-597160-4031 10-597109-401 10-597109-4031 10-606014-221 10-597160-1931 10-597109-191 10-597109-1931 10-606014-291 10-597160-3431 10-597109-341 10-597109-3431 20-22 10-606014-46 10-597160-4631 10-597109-461 10-597109-4631 20-24 10-40557 10-597160-1631 10-597109-171 10-597109-1731 16-18-20 10-606014-022 10-597160-2231 10-597109-221 10-597109-2231 10-606014-171 10-597160-1731 10-597109-141 10-597109-1431 10-606014-311 10-597160-3331 10-597109-331 10-597109-3331 20-22 10-606014-361 10-597160-3631 10-597109-361 10-597109-3631 20-24 10-606014-121 10-597160-1231 10-597109-131 10-597109-1331 12-14 10-606014-231 10-597160-2331 10-597109-231 10-597109-2331 8-10 10-606014-251 10-597160-2631 10-597109-261 10-597109-2631 10-12 10-606014-271 10-597160-2731 10-597109-271 10-597109-2731 10-606014-261 10-597160-2431 10-597109-241 10-597109-2431 18-20 10-606014-201 10-597160-2031 10-597109-201 10-597109-2031 20-22 10-40792 10-597160-831 10-40793 10-597109-831 8 10-606014-41 10-597160-4131 10-597109-411 10-597109-4131 10-606014-321 10-597160-2831 10-606015-321 10-597109-2831 10-606014-381 10-597160-3831 10-597109-381 10-597109-3831 12-14 10-40564 10-597160-431 10-40565 10-597109-431 4 10-606014-58 10-597160-5831 10-597109-581 10-597109-5831 10-606014-331 10-597160-3531 10-597109-351 10-597109-3531 10-606014-44 10-597160-4431 10-606015-44 10-597109-4431 10-581806-000 10-597160-131 10-581808-000 10-597159-131 10-606014-341 10-597160-2931 10-597109-291 10-597109-2931 10-606014-351 10-597160-3031 10-606015-351 10-597109-3031 10-597276-48 10-597276-4831 10-606015-48 10-597109-4831 2/0 2/0 10-606015-47 10-597109-4731 4/0 4/0 10-597276-47 10-597276-4731 Crimp Tools Positioner/ Die Set Locator/ Color 16-18-20 12-14 16S 14-16 Red 12-14 16 12 8 4 14-16 Daniels AF8 or Equivalent TH29-1 or Equivalent Green 14-16-18 6 10-12 6 Pin - Blue Socket - Green Pico 400BH31 8 Pico 41431A-8N Pico Pin - 4025 Socket - 4026 Pico 41431A-4N Pico 4043 Pico 41431A-0N Pico Pin - 4042-1 Socket - 4042 Pico 51431A2/0N Pico Pin - 6490 Pico 51431A4/0N Socket - 6491 10 0 0 0-2 4 Additional contact variations including thermocouple contacts are available; consult Amphenol, Sidney, NY for information. 53 Pico 500 RADSOK® Technology RADSOK® Technology Advantages RADSOK’S twisted grid configuration allows for 50% more current to pass through the same size pin, while providing increased reliability, ampacity and cycle durability as well as lower insertion force, T-rise and voltage drop. RADSOK® Derating Chart – Temperature vs. Current Based on single conductors in free air. Wire cross-section same size as pin contact crosssectional area. • HIGH RELIABILITY Unique RADSOK® design and construction technology create an electrical contact interface that exceeds typical interconnect requirements. Applications in aerospace, medical, industrial, automotive, mining, offshore, and other harsh environments depend on the high reliability of Amphenol’s RADSOK® technology. • LOW CONTACT ENGAGEMENT/SEPARATION FORCES The hyperbolic lamella socket contact construction distributes normal forces over a high percentage of the mating pin surface. This creates a smooth, even engagement effort. This force distribution also contributes to excellent performance in vibration applications with resistance to typical fretting corrosion. • LOW CONTACT RESISTANCE The large interface area between the socket lamella and pin surface result in very low contact resistance, enabling the RADSOK® contacts’ high current ratings compared to traditional power contact designs. • HIGH MATING CYCLE DURABILITY RADSOK® contacts with typical silver plating finishes have demonstrated survival of 20,000 mating cycles. Specialized plating and contact lubricants can extend cycle life to 200,000 matings or higher. Even with continuous exposure to harsh environmental abuse (salt, sand, and high humidity), RADSOK® contacts have been tested to maintain low contact resistance beyond 10,000 mating cycles. RADSOK® Socket Table CRIMP CONTACT DATA RADSOK Part Number APPLICATION TOOLS ® Socket Contact Mating Size Wire Well Crimp Tools Positioner/Die Set Locator/Color Silver Gold 10-639140-121 10-639140-1231 12 12-14 Daniels AF8 or Equivalent TH29-1 or Equivalent Green 10-639140-081 10-639140-0831 8 8 Pico 400BH31 Pico 41431A-8N Socket - 4026 10-639140-041 10-639140-0431 4 4 Pico 400BH31 Pico 41431A-4N Pico 4043 10-639140-001 10-639140-0031 0 0 Pico 400BH31 Pico 41431A-0N Socket - 4042 54 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated B A A C B D A C B A E B D C Insert Arrangement Front of Socket Insert Front of Socket Insert 10SL-3 10SL-4 14S-2 14S-4 14S-5 Service Rating A A Inst. D Inst. Number of Contacts 3 2 4 1 5 Contact Size 16 16 16 16 16 A F A 100˚ 100˚ A C B C D Insert Arrangement B B E D A C B A C B 100° Rotation of 14S-2 100° Rotation of 14S-7 14S-6 14S-7 14S-9 Inst. A A Inst. A Number of Contacts 6 3 2 4 3 Contact Size 16 16 16 16 16 Service Rating F A F E C E Insert Arrangement B G D 14S-10 14S-12 A A G B D B A C C B 14S-A7 16S-1 16S-3 16S-4 16S-5 Service Rating A A B D A Number of Contacts 7 7 1 2 3 Contact Size 16 16 16 16 16 A E C A A D B A D C B Insert Arrangement B B C C 16S-6 16S-8 16-2 16-7 Service Rating A A E A Number of Contacts 3 5 1 1 2 2 2 Contact Size 16 16 12 8 16 12 16 CONTACT LEGEND 16 6 55 16-9 A 12 8 4 0 GT Series Connectors ACA-B/GT contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated C A A B A B A B C D B 16-10 16-11 16-12 16-13 16-59 Service Rating Insert Arrangement A A A A A Number of Contacts 3 2 1 2* 4 Contact Size 12 12 4 12 12 H A G B I J F Insert Arrangement B C E A D A C B A C D B 18-1 18-3 18-4 18-5 18-6 18-7 B, C, F, G = A; Bal. = Inst. D D D D B Number of Contacts 10 2 4 2 1 1 1 Contact Size 16 12 16 12 16 4 8 Service Rating G F F A H E Insert Arrangement B D A C B F D A D E A D B G B A C B B C 18-8 18-9 18-10 18-11 18-12 A Inst. A A A Service Rating A C D C D E C E 18-13 A Number of Contacts 1 7 2 5 4 5 6 1 3 Contact Size 12 16 12 16 12 12 16 8 12 100˚ A B D A Insert Arrangement B B C D B E F A C G B G C D 18-14 18-15 18-16 A A C Service Rating A F E H A E J C D K 100° Rotation of 18-9 18-17 18-19 18-20 Inst. A A Number of Contacts 1 1 4** 1 2 5 10 5 Contact Size 4 16 12 12 12 16 16 16 CONTACT LEGEND * A = Iron; B = Constantan **A, C = Iron; B, D = Constantan 7 56 16 12 8 4 0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated H G A G A 250˚ B J F C E Insert Arrangement E C D B A B E D A C 18-24 18-29 B E D 250° Rotation of 18-1 18-22 110˚ A B I C D 260˚ 110° Rotation of 18-20 260° Rotation of 18-20 18-30 18-31 20-2 Service Rating D B, C, F, G = A; Bal. = Inst. A A A D Number of Contacts 3 10 5 5 5 1 Contact Size 16 16 16 16 16 0 A A D A A C G H C B Insert Arrangement C C B A B F G B H F F B E B C C D E A E D D 20-3 20-4 20-6 20-7 Service Rating D D D A, B, H, G = D; C, D, E, F = A Number of Contacts 3 4 3 8 2 4 1 7 Contact Size 12 12 16 16 8 16 12 16 L B F M N F E A C G D E A D H A K E Inst. H = D; Bal. = A F B D E G D H I D C C C A C A F B B J 20-9 E A G 20-8 B B Insert Arrangement 20-11 20-12 20-14 20-15 20-16 Service Rating Inst. A A A A 20-17 A Number of Contacts 13 1 1 2 3 7 2 7 5 1 Contact Size 16 4 16 8 12 12 12 16 12 16 CONTACT LEGEND 8 57 16 12 8 4 0 ACA-B/GT GT Series Connectors contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated H G F D B E C C A A Service Rating F C 20-20 E A D B D E B 20-19 A B I G B 20-18 F H A C D Insert Arrangement A A A I B C 20-21 A 20-22 20-23 A A A Number of Contacts 3 6 3 1 3 1 8 3 3 2 Contact Size 12 16 8 4 12 12 16 8 16 8 100˚ A L B C F M D N B H A K H J G 20-25 A M U T 100° Rotation of 20-11 20-24 Service Rating G D C Insert Arrangement E J L K V S N P R F J A B C D A A I M B L K H N G L F 20-26 K D M E C B T P S R J E H 20-27 L C N B F E G N E H A D 250˚ F G C M D 250° Rotation of 20-11 20-29 20-30 Inst. A A A Inst. Number of Contacts 2 2 13 19 14 17 13 Contact Size 8 16 16 16 16 16 16 B F A C M J A G E A C A D A B F L L D D F E K H D E C H Insert Arrangement J A K K J C C C B B E B B F 20-33 20-51 20-57 20-58 20-59 Service Rating A A A A A Number of Contacts 11 3* 7* 5 5 3* 1 5 Contact Size 16 8 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire 16 12 for #10 wire CONTACT LEGEND * Solderless 9 58 16 20-66 A 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated A A G A B F H F B C B Insert Arrangement D A D E Service Rating A E C B B C 20-79 22-1 22-2 22-4 H=D; Bal. = A D D A D C 22-5 D Number of Contacts 7* 1* 2 3 2 2 2 4 Contact Size 16 12 for #16 wire 8 8 8 12 12 16 A A B B C B C Insert Arrangement D A C B A 22-6 22-7 22-8 22-9 22-10 D E E E E Service Rating Number of Contacts 2 1 1 2 3 4 Contact Size 8 16 0 12 12 16 L A E B B D A J E C D Insert Arrangement Service Rating K A B M U T H V S B P R G C A A N F B C D E E C D F 22-11 22-12 22-13 22-14 22-15 B D E = D; A, B, C, D = A A D = E; A, B, C, E, F = A Number of Contacts 2 2 3 4 1 19 5 1 Contact Size 16 8 16 12 16 16 12 16 CONTACT LEGEND * Solderless 10 59 16 12 8 4 0 GT Series Connectors ACA-B/GT contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated A G F G A H B G J C F K H M H C C G G H A F J B E D C D N D E B L P J B E D D Insert Arrangement F C J E A A B H E F 22-16 22-17 22-18 22-19 22-20 A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A A A Service Rating Number of Contacts 3 6 1 8 8 14 9 Contact Size 12 16 12 16 16 16 16 A G A C D B C A F A H B E B A H F B B J G E C C F D C D D Insert Arrangement E 22-21 22-22 22-23 22-24 22-27 A A H = D; Bal. = A C, D, E = D; A, B, F = A J = D; Bal. = A Service Rating Number of Contacts 1 2 4 8 2 4 1 8 Contact Size 0 16 8 12 12 16 8 16 F E G B Insert Arrangement Service Rating C B C G E F D H E E K J B D M N A F L B E G C B A C D A A D A C F H D 22-28 22-33 22-34 22-63 22-65 A A, B, C, D = D; E. F. G = A D A H = D; Bal. = A Number of Contacts 7 7 3 2 4 8 8* Contact Size 12 16 12 16 12 16 12 for #14 or 16 wire CONTACT LEGEND * Solderless 11 60 16 12 8 4 0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated J A A F K H P F M B E F B C B C D D 22-80 24-2 24-3 A A D D J R 24-5 A 5 3* 7 2 5 16 Contact Size 12 16 8 for #10 or 12 wire 12 12 16 16 A L A K B H P J E C Insert Arrangement Service Rating F C N I B A E E G B C A G B D E F D O H D A B M D F G C I H 24-6 24-7 24-9 24-10 A, G, H = D; Bal. = A A A A 24-11 A Number of Contacts 8 2 14 2 7 3 6 Contact Size 12 12 16 4 8 8 12 A F A E N D B G C B E H K C C K B A D B C L D D J H F 24-12 24-16 24-17 24-19 A A, B, F, G = D; C, D, E = A D A Service Rating A J B G C Insert Arrangement A M E L D N S 8 G H K M Number of Contacts F E G P C 22-70 B C D L D Service Rating A A G C N E Insert Arrangement G E L F A B F E E 24-20 D Number of Contacts 2 3 1 3 3 2 3 12 2 Contact Size 4 12 8 12 16 12 16 16 12 16 CONTACT LEGEND * Solderless 12 61 16 12 8 4 9 0 ACA-B/GT GT Series Connectors contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated A H B G J D A A A F E B C K K G F D C B D S H N J E P T Q A D V U B C D E Insert Arrangement C G M R E B F L W X Y Z C 24-21 24-22 24-27 24-28 D D E Inst. A 5* Service Rating Number of Contacts 1 9 4 7 24 Contact Size 8 16 8 16 16 H P E D B M D M L K R H F L A F E A G E B B E A C C J N K F B, E for AN #10 or 12 wire A, C, D for AN #8 wire P J N A 24-51 D C B C D Insert Arrangement 24-52 24-53 24-58 24-59 Service Rating Hi-Volt A A A Number of Contacts 1 5* 3 3 7 7 7 7* Contact Size 12 8 8 12 16 12 16 8 for #10 or 12 wire L J E A K M N S F A F B G E B G H R H C P Insert Arrangement P V N T U J F A G E C A G E B A D C D C L 24-65 24-66 24-67 24-71 A D Inst. A Service Rating F B B M K E A 90˚ C D D F D R S 24-60 24-75 A Number of Contacts 11 4 7 19 2* 5* 5 2 Contact Size 12 16 12 12 8 8 for #10 or 12 wire 8 8 for #16 wire CONTACT LEGEND * Solderless 13 62 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated A E E A D K B R B F L M S E C D G H N T F J P G Q U H V N T U Insert Arrangement W X B 12 11 3 25 18 26 21 9 8 E K 4 C G F M L D R 6 N S W V Z Y a 24-79 24-80 24-84 24-96 Service Rating A Inst. A Inst. A Number of Contacts 5 23 1 18 28 25 Contact Size 8 16 12 12 (Coax) RG-188/U 16 16 Q P U X 7 J H T 5 19 20 10 B A 2 17 28 22 27 L 1 24 23 13 C M Z 16 15 A K C 90˚ 14 P J V D R S 24-AJ or RG-174/U H A K B A J G J C L P H A S B M A C P C G G F Insert Arrangement Service Rating D F D E N C B D E F B E 28-1 28-2 28-3 28-4 A, J, E = D; Bal. = A D E G, P, S = E; Bal. = D Number of Contacts 3 6 2 12 3 2 7 Contact Size 8 12 12 16 8 12 16 H A A A E G B B A J M B F K L D C C E B C D Insert Arrangement Service Rating 28-5 28-6 28-7 28-8 D D D L, M = E; B = D; Bal. = A Number of Contacts 2 1 2 3 2 2 10 Contact Size 4 12 16 4 4 12 16 CONTACT LEGEND 14 63 16 12 8 4 0 GT Series Connectors ACA-B/GT contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated J H F A K G A B G E M F L J N P U V B R W C L S D Insert Arrangement D N 28-10 28-11 D G = D; Bal. = A A J A 6 2 2 3 4 18 26 Contact Size 12 16 4 8 12 12 16 16 R N A S a b Z M L J P D V R X S F J S g e H h f j 28-13 C A L M U V R B B Q C D J H K E L A G F N P R D M P k G m l 100° Rotation of28-12 32-6 of T W c b a K N V U T Z Y E G H A B C D E F G J K L M d W X K H C U d Y Insert Arrangement B T F 28-12 6 P E G H Number of Contacts 100˚ V W X K I D d Y C U L M T C B T b Z M C H 28-9 Service Rating G B A S a D X E A K R P E F 28-15 F N E 28-16 28-17 Service Rating A A A R = B; M, N, P = D; A to L = A Number of Contacts 26 35 20 15 Contact Size 16 16 16 16 A L A B K M E K P H C G J F L M G E H Service Rating M N D J Insert Arrangement B C K C A J B L D G H F E 28-18 28-19 28-20 M = C; G, H, J, K,L = D; A, B = A; Bal. = Inst. H, M = B; A, B, = D; Bal. = A A Number of Contacts 12 4 6 10 4 Contact Size 16 12 16 12 16 CONTACT LEGEND * Solderless 15 64 16 12 8 4 0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated B A E K S M L T U N c h g n Insert Arrangement e k j r N B f B K Z X M L A H R P d J A F J W p C D H V b a C G F P R A L N S T B m E F D C E s E H F D J K 28-21 28-22 28-51 28-59 A D A A Number of Contacts 37 3 3 12 7 10 Contact Size 16 4 16 12 12 16 R N M T A D B L A Insert Arrangement C H J J B S H K E J F D S E H F 28-72 28-74 28-75 A – A A Number of Contacts 2 14 3 9* 4* 3* Contact Size 8 12 4 (Coax) RG-59A/U or RG-62A/U 16 8 8 for #10 wire (S, T, R) 9* B R P 1 L H 2 3 S E H G F 4 D 5 F E F H G E 6 C A B C I 8 for #10 wire B A C D K 7* 16 A N M T Insert Arrangement C D 28-66 Service Rating J B R P L C K F T K M T B R P L E M A N A N C S J D 28-79 28-82 28-84 28-AY A D A A Service Rating D M Service Rating P U C Number of Contacts 7 9 2 4 9 4 5 Contact Size 8 16 8 12 8 4 16 CONTACT LEGEND * Solderless 16 65 16 12 8 4 0 ACA-B/GT GT Series Connectors contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated B A C E E F A A D E F G B B O H G D J M D C L C B D K A H C E N J Insert Arrangement Service Rating 32-1 32-2 32-3 32-4 A = E; B, C, D, E = D E D F, J, K, N = A:, Bal. = D Number of Contacts 2 3 3 2 1 2 2 4 2 12 Contact Size 0 12 4 16 0 4 12 16 12 16 A A B G H L M C D E I K P J N R O S T U Insert Arrangement g V W B f k E K S L Z T M a U Y e j J R X d h P W c F F B C H N D I b X A G V O 32-5 32-6 32-7 D A A, B, h, j = Inst.; Bal. = A Service Rating Number of Contacts 2 2 3 2 Contact Size 0 4 8 12 16 16 7 28 12 16 M T Y c H I e J V a P W R b S X Insert Arrangement A A A B E O Z d F D N U K E B F C C G D H E F I J G B G D K C L L M N 32-8 32-9 32-10 A D A, F = E; G = B; B, E = D; C, D = A Service Rating Number of Contacts 6 24 2 12 2 2 3 Contact Size 12 16 4 16 4 8 16 CONTACT LEGEND 17 66 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated A N B A M C E D H F G J X L K M K S V E D G H L M J I K D B C C D T P E F N R S O T E F U H P Insert Arrangement Service Rating Z A 100˚ B C Y N O R W J L A B P H U F V G G 32-12 32-13 32-15 C, D, E, F, G = A; Bal. = D D D X W 100° Rotation of 32-6 32-16 A Number of Contacts 5 10 5 18 2 6 2 3 2 16 Contact Size 12 16 12 16 0 12 4 8 12 16 C D U c V h g w u x 19 15 16 17 AE 26 8 27 30 24 23 11 10 7 29 21 22 8 32-22 32-25 32-31 A A A 4 54 25 31 Contact Size 4 16 12 16 K J R Y S h w V d y BB z v D E F 32-48 Service Rating Inst. Z Y X W F H AA A i h a M P j k q r T R b S c u t g 90° CW Rotation of 32-15 H d V I e w J P W 32-53 D t, u = E; Bal. = Inst. K R b B F C G L S X 32-52 A E O V a D N U Z E D C v c U f n p s B T d m Y G CC Insert Arrangement J H g p n K C X f u t B N M L P W m k A H N c s x 90˚ F M b r B U j i q L T a Z 7 D E 6 9 Number of Contacts A C D 20 32-17 Service Rating 5 28 31 6 4 19 25 13 5 3 17 18 4 18 20 9 AG AF 3 14 24 2 15 12 10 AC AA 16 14 25 22 21 r v y z AD Insert Arrangement k q t s AB f j p n 23 W a e d 1 1 2 11 R Z Y b 13 12 J M P T X B E H L O S m B D K N C A G F A 32-56 A Number of Contacts 48 2 6 5 37 24 6 Contact Size 16 0 12 12 16 16 12 for #10 wire CONTACT LEGEND 18 67 16 12 8 4 0 GT Series Connectors ACA-B/GT contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated A B C D V E F X W D A C B n S R Insert Arrangement 32-58 32-59 – A 6 2 Contact Size 12 0 (Coax) RG-71/U A L P O 16 8 (Coax) RG-124/U N N S X b O T c n m s AB X B D G K g V Y h t w z P U j p u x AD 2 16 Contact Size 4 8 12 16 17 16 33 15 32 14 Insert Arrangement L M J v N AC P R Q AG 32-68 A 4 (Coax) RG-58C/U 1 1 2 2 3 D 3 23 38 46 42 41 29 10 24 26 27 28 1 8 4 4 9 5 25 39 40 11 K 16 45 12 E H 16 44 30 r G 8 (Coax) RG-124/U 22 31 F 4 43 13 D C f 12 37 34 y k W 54 36 35 B 2 21 20 19 18 q a AE Inst. 1 e AA ** 2 R V Z d 32-64 Number of Contacts A J M L 32-62 Service Rating E H AF Insert Arrangement A 8 (Coax) RG-161/U S W 32-60 16 J T L 4 (Coax) RG-161/U or RG-179/U C U C M 8 F R D B K W 15 A M J H U V X 2 F H K L Y 40 D G g a N J T 4 B C K M ** Number of Contacts I N 32-57 Service Rating E h P G f A S Z E F d i P E c t H F D b s v C a T U j R B Z w k T A q m U H Y p 6 8 7 6 13 3 5 9 7 10 11 12 E 2 7 8 6 5 9 A 4 14 17 15 18 16 C 19 B 32-73 32-75 32-76 Service Rating A 8, 9 = D A Number of Contacts 46 2 7 19 4 1 Contact Size 16 12 8 (Coax) RG-180B/U 12 4 8 CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 19 68 32-79 D 16 12 8 4 0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated A A B C B D F K N D C S E b F G H K L M m J N X s w R Z d h t u x q y AA I f k C G J O AE AG 32-AF 32-AM A A A K L M P R S U V W N D 4 12 55 1 4 18 Contact Size 4 16 16 4/0 12 16 A A A T 36-1 Number of Contacts F H v 32-82 Service Rating F r AC AH AD B E W a e AF Insert Arrangement D R V j p z AB Q P U A J M Y c n H L O T g P E G D E B B C Insert Arrangement B C D C 36-3 36-4 36-5 D A = D; B, C = A A Service Rating Number of Contacts 3 3 3 4 Contact Size 0 12 0 0 A A F H O C K I L P U Y Z h d j G N a e X f u g k I S W X m F J M T Y n s x y k u v K H P U p L a Z h t R V e j r w y z z 36-6 36-7 A A 36-8 A Number of Contacts 2 4 7 40 1 46 Contact Size 0 4 12 16 12 16 CONTACT LEGEND . C E d c g s w D O b f m p v x N T c b t D Service Rating J S W r Insert Arrangement B M R V n A E G F B E B D C 20 69 16 12 8 4 0 4/0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated S Z a A M U I O D E J V C H A O P d H Y e f K W b L T W d C F R X c P V B J F L Q Z f q u r y k f m Z z s w v y c k j r q u U b h p t N T a g n x S Y e G M R X d L Q W s w v N j K P V c F E J O U B D H b h p n t T a g C N S Y 100˚ G M R X m G E K e A B D x z 100° Rotation of 36-10 Insert Arrangement 36-9 Service Rating 36-10 A 36-11 A A Number of Contacts 1 2 14 14 48 48 Contact Size 4 8 12 16 16 16 A C H O V Z g n M r v R S x G F N H L C D M G D E C K Q B Q H P A J k s w y B L K c b j J I U a q u T N M N h p P 110˚ G S Y f t L R X e m F K Q W d E J P A B D E z F 110° Rotation of 36-10 36-12 36-13 Service Rating Insert Arrangement A N, P, Q = E; Bal. = A Number of Contacts 48 2 15 5 5 Contact Size 16 12 16 8 12 16 S d Q c P k Y f E g a X Z L K Y J K F D F H I A E G J M L P D W h Service Rating O V b M Insert Arrangement C e m j N U C 100˚ B T R d Z h j n e G X b f w T O c Y g k y P V U Z d j n e R S W g k m p v s y 110° Rotation of 36-7 36-17 A A Number of Contacts 35 7 40 7 40 Contact Size 16 12 16 12 16 CONTACT LEGEND 70 c f w T X b a t u 110˚ N z 36-16 21 J M L x 100° Rotation of 36-7 36-15 E G I z M = D; Bal. = A B D r s x K 6 F H h p m v r H N S a t u C W V U D B A A R 36-14 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated S 100˚ M U Z a A I O E J V f W T X C M T Y V h f 16 11 g 19 4 5 17 10 k 3 22 c j 15 20 W b a Z 2 21 12 N U 1 13 G L S G F K e d F L X c R B K R b E J P H Y 14 B D H A P d e C D 18 m 6 9 N 8 7 100° Rotation of 36-9 Insert Arrangement 36-18 36-20 36-22 A A D Service Rating Number of Contacts 1 2 14 14 2 2 30 22 Contact Size 4 8 12 16 8 12 16 12 A B A E L T a U k X f d p v u AA z q x j q 36-52 A p S R L P M N 36-54 A Number of Contacts 2 2 52 8 31 Contact Size 0 4 16 8 16 Z b a A Y q g T S Insert Arrangement H f p f n v R g w A S Z h q y AE AC i r x AD a s z H O b j AA K k Y Z t AB h d j R a e X g k t u s w x m p v r T c b f y z 36-55 36-59 36-60 A A Service Rating S W AJ N N M V n AH J I L P U AF M E G F U T B D C K J Y p L P P X d u J N W m K h R c C D H F M V F n i U L E d t r j D m s k V E C X W A B B c J K h AF D H f g T AH AE F n i U E d t r V D m s k W AC AD C i r w AB 36-51 Service Rating h B c X Z Y A Y S g n t B Insert Arrangement W m y R b a Z K J P V s C H N c j D M b C D F A Number of Contacts 31 8 50 3 40 7 Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire CONTACT LEGEND 22 71 16 12 8 4 0 GT Series Connectors ACA-B/GT contact contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated A A B A E L D B D B M V N W c g n u v w T Z a y k s z t AB AA AE AH AD C b j r x U i q p S h AC C R Y f K J P X d m C D H F AF AJ Insert Arrangement 36-64 36-65 Service Rating – – Number of Contacts 4 4 3 50 0 (Coax) RG-11/U 0 (Coax) RG-59/U, RG-62/U 12 16 RG-12/U, or RG-13/U or RG-71/U Contact Size 36-71 A 1 A 48 F 50 B 51 53 55 58 62 C 71 73 66 74 78 A Number of Contacts 7 43 1 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/B 6 9 13 27 31 32 36 40 43 46 Insert Arrangement 15 18 14 16 17 16 for #14 wire 10 20 24 29 1 9 17 8 21 25 30 34 38 41 B 42 14 26 E 35 3 12 C 13 G 39 2 11 12 16 33 37 44 20 11 12 36-75 A 11 15 28 13 A F 8 19 23 43 5 10 18 22 8 10 48 2 7 14 9 39 19 36-74 3 45 7 38 40 42 21 5 6 89 90 – 4 41 23 4 37 35 46 22 36-73 1 34 48 24 83 3 36 47 85 Service Rating Contact Size 33 26 2 32 30 25 75 79 87 91 27 70 82 86 88 D Insert Arrangement 69 77 28 61 65 81 84 29 57 60 64 72 80 52 56 68 76 G 31 54 59 63 67 E 49 7 4 44 45 47 D 6 5 36-76 36-77 Service Rating A D Number of Contacts 47 7 2 12 Contact Size 16 4 16 8 CONTACT LEGEND 23 72 36-78 A 16 12 8 4 0 ACA-B/GT GT Series Connectors contact arrangements front face of pin insert or rear face of socket insert illustrated 1 2 1 3 4 6 7 8 11 12 13 5 2 3 A 4 9 10 6 7 8 14 15 11 12 13 5 F 9 10 14 15 B E C G 16 17 18 19 16 17 18 19 D Insert Arrangement 20 20 36-79 36-80 36-83 Service Rating A A – Number of Contacts 20 20 7 Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U S R Q c P B C V N h g Z Y a Service Rating H J 5 36-97 M = D; Bal. = A C 35 1 3 3 3 3 16 for #12 wire 4/0 4 8 12 16 A d z y O w N W L c Z b a U r g C D B A C H E F I J G K L h S D T E M N O P R S N j T k F G H q D f B R J s Insert Arrangement A V K t 36-99 e Y X M u Q P x v 6 36-85 Number of Contacts Contact Size 11 4 G K Insert Arrangement 7 E F X L 12 3 W M 9 10 D f m j 8 2 U e k b 1 A T d m U Y V W Z a b C n p c d B X G e 36-AF 40-1 40-5 Service Rating A D A Number of Contacts 48 6 24 5 Contact Size 16 12 16 0 CONTACT LEGEND 24 73 16 12 8 4 0 4/0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated A C G M H N O U V W b c d j B D L C J K P Q R S Y Z g h e f l m p q t u k F r Insert Arrangement J N P 28 S Y s 40-10 A 8 25 12 a A 11 40-30 A 1 22 24 4 9 16 29 1 Contact Size 8 12 16 4 8 16 12 4 16 1 13 4 19 33 30 35 26 32 31 18 6 10 24 44 56 37 50 35 15 14 48 32 33 34 13 AC AD v AE AR AZ BA BJ 9 AH AF AS AT BB BK BC BL BS 10 AJ BT BU 40-53 D A A Number of Contacts 35 60 85 Contact Size 12 16 16 1 8 16 9 17 25 33 18 26 34 42 4 2 50 10 27 43 51 11 19 35 20 44 23 13 29 45 14 30 46 31 47 21 24 20 41 39 19 49 55 22 41 40 32 40 48 54 57 Insert Arrangement 23 39 53 15 22 38 18 17 42 53 43 60 38 51 55 56 16 15 4 59 58 35 14 57 45 47 29 34 33 12 6 7 30 8 31 48 49 5 28 46 50 36 27 44 32 10 9 11 13 40-57 40-61 Service Rating E A Number of Contacts 4 1 3 55 60 Contact Size 0 8 12 16 16 40-62 A CONTACT LEGEND 74 3 26 52 58 25 BV 25 54 37 56 59 3 BH BR 2 24 7 21 37 BF BP AN AY 1 6 12 28 36 52 5 AM AX 40-56 2 4 BE s AB 11 12 40-35 3 AL AW BN r AA AK BD BM Service Rating 1 z AV g q y AU f p x W d n w V c m M U b k L T a j u AP 8 31 49 36 16 i t 7 30 47 58 h 6 46 57 59 51 17 7 29 K S Z D J R Y C H P X 5 B F N 4 28 45 60 E 3 27 55 38 8 9 Insert Arrangement 22 23 53 52 5 21 25 11 43 54 40 2 26 39 19 20 41 20 A 1 25 42 21 3 29 27 12 22 2 18 14 34 24 23 17 28 9 10 Number of Contacts 15 7 24 26 b Z 23 13 X W c 6 27 14 U T V 22 15 Q O R 5 30 L M i 4 21 29 16 40-9 Service Rating H K G 3 20 17 I a o n E D T 2 18 A B I X 1 19 F E 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated 42 21 41 19 18 25 28 29 17 58 50 36 16 48 14 13 Insert Arrangement k D 4 W b X a 2 E Z Y 3 F J 11 12 m K 10 V q c 9 33 34 C U j n 8 32 49 35 15 7 31 T i p d L 47 S g f 30 57 51 37 M 6 46 59 1 B R h 5 45 61 52 38 4 44 56 60 A N 3 27 55 53 39 P 2 26 43 54 40 20 1 24 23 22 H 40-63 40-64 40-66 Service Rating A – – Number of Contacts 61 3 20 13 16 for #14 wire 12 16 8 (Coax) RG-124/U Contact Size A 4 A N B 1 P M B W E D F H 2 11 C X K V 19 D S 36 E T U 12 20 28 J J 3 6 R L C 0 (Coax) RG-63 B/U 37 45 13 21 29 F M 39 Insert Arrangement Service Rating 15 54 32 40-68 A A A 1 10 21 61 Contact Size 16 4 (Coax) RG-59/U 8 16 A 22 42 21 41 D H E 19 J 18 54 40 43 51 44 52 57 61 3 44 28 29 30 57 47 51 37 58 50 36 15 L 35 14 M 4 3 8 32 9 33 34 13 7 31 48 49 5 6 46 59 2 5 45 56 6 4 27 43 61 52 38 1 2 26 60 39 16 Insert Arrangement 25 55 53 17 Service Rating 1 24 23 B 20 K 42 27 35 40-70 Number of Contacts F 34 50 18 26 G 40-67 C 33 56 60 17 25 41 49 55 59 10 16 24 40 48 58 9 23 31 47 53 H L K 14 30 5 8 22 38 46 4 7 10 12 40-72 40-73 A A 11 40-74 A Number of Contacts 1 10 61 1 1 4 Contact Size 8 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U or RG-214/U CONTACT LEGEND 26 75 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements arrangements front face of pin insert or rear face of socket insert illustrated 1 A 1 B 5 5 12 4 20 2 C E D F H 21 37 J 14 22 30 38 46 39 Insert Arrangement 42 56 60 26 34 50 43 57 40-80 E 58 40-81 A A 1 10 1 62 Contact Size 0 12 4 16 16 for #14 wire 1 12 20 13 21 29 37 46 14 22 30 38 2 8 15 23 31 39 47 3 7 32 48 54 17 33 49 50 56 60 18 34 43 57 61 36 44 52 40 20 28 56 28 51 37 58 50 36 16 35 15 32 13 4 2 8 31 33 34 7 30 48 49 6 46 47 59 5 29 57 53 62 4 27 45 60 38 17 1 3 44 55 14 Insert Arrangement 43 54 53 52 18 58 2 26 39 19 45 1 25 42 41 21 19 27 35 51 22 11 26 42 24 23 10 25 41 55 59 16 24 40 4 9 45 53 62 4 6 28 36 44 52 Number of Contacts 5 19 27 35 51 61 11 18 M 40-75 Service Rating 25 41 55 17 33 49 59 L K 24 40 10 16 32 48 4 9 15 31 47 8 23 54 3 3 7 13 29 2 6 9 10 3 11 12 40-82 40-85 Service Rating A A – Number of Contacts 62 60 4 Contact Size 16 16 for #14 wire 0 (Coax) RG-115A/U 6 40-86 38 A 1 9 18 7 G 2 7 35 C 21 8 19 36 5 20 37 B H 22 10 2 6 23 3 1 34 11 17 E F 5 33 D 16 32 4 4 3 14 27 29 40-87 40-AD Service Rating D A Number of Contacts 7 4 4 38 Contact Size 4 0 8 12 76 28 40-AG A CONTACT LEGEND 27 26 13 31 30 Insert Arrangement 25 12 15 24 16 12 8 4 0 GT Series Connectors ACA-B/GT contact arrangements front face of pin insert or rear face of socket insert illustrated B N A C M B 31 30 D 2 27 A L 5 16 4 G 14 23 22 40-AP 40-AR E Inst. Number of Contacts 2 3 3 7 25 15 4/0 0 4 12 12 16 17 15 24 14 34 23 13 1 25 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 43 40-AS A E 2 18 P F 22 3 19 N A 4 D 20 5 C Insert Arrangement Service Rating 9 H 6 C 7 10 B G 39 21 11 A B M 12 20 13 21 Service Rating 16 40 F J Contact Size 38 39 11 3 12 24 15 Insert Arrangement 37 10 6 17 25 H K 1 26 E 36 9 7 18 28 35 8 19 29 33 34 32 L J K 8 40-AT 40-AU A A 40-AV D Number of Contacts 1 24 18 3 10 1 3 Contact Size 8 12 16 4 8 16 2/0 CONTACT LEGEND 16 28 77 12 8 4 0 2/0 4/0 ® ® Amphenol ® ACA-B Connectors Amphenol ACA-B Connectors how to order, connector intermateability how to order, connector intermateability how to order, connector intermateability Part Part Number Number System System ACA ACA ACA 1 1 1 1. 1. 1. 2. 2. 2. 3. 3. 3. 4. 4. 4. 5. 5. 5. 6. 6. 6. 7. 7. 7. 3100 3100 3101 3100 2 2 2 (example part shown) Part Number System (example part number number shown) (example part number E 10SL-3 P W E 10SL-3 P shown) W E 3 3 3 10SL-3 4 4 4 Connector Connector Series Series ® ACA designates Amphenol Connector Series ACA designates Amphenol® ACA-B ACA-B Reverse Reverse Bayonet Bayonet Series Series ® ACA designates Amphenol ACA-B Reverse Bayonet Series Shell Style Shell Style 3100 Wall mount mount receptacle receptacle for for front front panel panel mounting mounting Shell --Style 3100 Wall 3101 Cable connecting receptacle 3100 receptacle for front panel mounting 3101 -- Wall Cablemount connecting receptacle 3102 -- Box Box mount receptacle (Class E E only, only, see see sect. sect. 3) 3) 3101 Cable connecting receptacle 3102 mount receptacle (Class 3103 Wall mount receptacle for rear panel mounting 3102 Box mount receptacle (Class E only, see sect. 3) 3103 Wall mount receptacle for rear panel mounting 3106 -- Straight Straight plugreceptacle for rear panel mounting 3103 Wall mount 3106 plug 3107 -- Jam Jam nut nut plug receptacle -- rear rear panel panel mount mount 3106 Straight 3107 receptacle (Class A only, see sect. 3) 3107 - (Class Jam nut receptacle - rear A only, see sect. 3) panel mount 3108 -- (Class 90° angle angle plugsee sect. 3) A only, 3108 90° plug 3108 - 90° Class angle plug Connector Connector Class A Environmental, no rear rear threads threads (Applies (Applies to to 3107 3107 only) only) Connector Class A Environmental, no A Environmental, no rear threads (Appliesseal to 3107 E Environmental resisting, resisting, with grommet grommet and only) E Environmental with seal and strain relief backshell E Environmental resisting, with grommet seal and strain relief backshell strain relief backshell F Environmental resisting, with with grommet grommet seal seal and and F Environmental resisting, solid backshell backshell resisting, with rear rear accessory accessory threads F Environmental with grommet seal and solid with threads solid backshell withshrink rear accessory G Backshell for heat heat terminationthreads G Backshell for shrink termination G Backshell for heat shrink termination R Environmental resisting resisting with with lightweight lightweight endbell endbell R Environmental R Environmental resisting with lightweight endbell Shell Size Size and and Insert Insert Arrangement Arrangement Shell See pages 2-4 for for insert availability charts, and pages 6-24 6-24 Shellpages Size and Insert Arrangement See 48-50 for insert availability charts, andpages 2-4 insert availability charts, and for insert pattern drawings. Seeinsert pages 2-4 insert availability charts, and pages 6-24 pages 55-77 forfor insert pattern drawings. for pattern drawings. for insert Style pattern drawings. Contact Contact Style P designates pin contacts contacts Contact Stylepin P designates S designates designates pin socket contacts P contacts S socket contacts Note: standard contacts are silver silver plated. plated. Consult Consult Connector Connector S designates contacts Note: standardsocket contacts are Modification for ordering gold plated contacts. Note: standard contacts are silver plated. Consult Connector Modification for ordering gold plated contacts. Modification for ordering gold plated contacts. Alternate Position Position Alternate W, X, Y and Z- --See Seepage page51. 5. Alternate Position X, YYand and See page 5. W, X, ZZ No suffix required for normal position. W, suffix X, Y and Z - See 5. position. required forpage normal position. No required for normal No suffix required for normal position. Designation for for Reverse Reverse Bayonet Bayonet Designation B designates for Reverse Bayonet coupling shells shells Designation Reverse Bayonet B designates Reverse Bayonet coupling B designates Reverse Bayonet coupling shells P 5 5 5 8. 8. 8. W 6 6 6 B B B 7 7 7 (F80) (F80) (F80) 8 8 8 Connector Connector Modification Modification Omit olive Connector Modification Omit for for standard standard olive drab drab connectors connectors with with solder solder type type silsilver plated plated contacts. Omit for standard olive drab connectors with solder type silver contacts. For a ver contacts.as For plated a modification modification as listed listed below, below, add add suffix suffix in in parenthesis parenthesis to the end of the part number. Consult Amphenol Industrial For a modification as number. listed below, add Amphenol suffix in parenthesis to the end of the part Consult Industrial Operations for further description or assistance. to the end of the part number. Consult Amphenol Operations for further description or assistance. Industrial Operations for further description or assistance. (RDS) (RDS) with with Radsock Radsock contacts contacts ® contacts (F80) with AWG crimp RADSOK contacts (RDS) with AWG Radsock contacts (F80) crimp contacts(crimp sockets only)* (FO) less contacts. are (F80) with AWG crimp contacts (FO) less contacts. (contacts (contacts are to to be be ordered ordered separately) (FO) less contacts. (contacts are to be ordered separately) (A176) gold (A176) separately) gold contacts contacts (T00) metric threads (A176) gold contacts (T00) metric threads in in flange flange holes holes (RFI) grounded plug only (T00) metric threads in flange holes (RFI) grounded - plug only (F42) less grommet grommet and backshell (RFI) grounded - plug only (F42) less and backshell (F85) less sleeve grommet (F42) and backshell (F85) less grommet sleeve and and grommet (A23) electroless plating (F85) less sleeve nickel and grommet (A23) electroless nickel plating (A232) with cobalt plating (A23) nickel plating (A232) electroless with black black zinc zinc cobalt plating (A232) with black zinc cobalt plating (072) gray zinc nickel **NEW** * Consult page 54 for RADSOK® Technology Advantages. MATEABILITY MATEABILITY WITH WITH IDENTICAL CONTACT ARRANGEMENTS ARRANGEMENTS WITH IDENTICALMATEABILITY CONTACT IDENTICAL CONTACT ARRANGEMENTS Connector Style Style Connector Connector Style ACA3100 ACA3100 ACA3101 ACA3100 ACA3101 ACA3102 ACA3101 ACA3102 ACA3103 ACA3102 ACA3103 ACA3106 ACA3103 ACA3106 ACA3107 ACA3106 ACA3107 ACA3108 ACA3107 ACA3108 ACA3108 Mateable with with Style Style Mateable Mateable with Style ACA ACA 3106, 3106, 3108 3108 ACA 3106, 3106, 3108 3108 ACA ACA ACA 3106, 3106, 3108 3108 ACA ACA 3106, 3106, 3108 3108 3100, 3101, 3103, 3102, 3107 3103, 3107 3107 ACA 3108 3101, 3102, ACA 3106, 3100, 3101, 3102, 3103, ACA 3106, 3106, 3108 3100, 3108 3101, 3102, 3103, 3107 ACA 3100, 3101, 3103, 3102, 3107 3103, 3107 3107 ACA 3106, 3108 3101, 3102, ACA 3100, 3101, 3102, 3103, ACA 3100, 3101, 3102, 3103, 3107 This This catalog catalog is is on on the the Amphenol Amphenol website: website: www.amphenol-industrial.com. This catalog is on the Amphenol website: www.amphenol-industrial.com. www.amphenol-industrial.com. See See www.amphenol-industrial.com www.amphenol-industrial.com and and See www.amphenol-industrial.com for the broad range of interconnection www.amphenol-aerospace.com See www.amphenol-industrial.com and www.amphenol-aerospace.com products offered by Amphenol. for the broad broad range of interconnection interconnection products products offered www.amphenol-aerospace.com for the range of offered by by Amphenol. for the broad range of interconnection products offered by Amphenol. Amphenol. 53 53 53 78 GT Connectors how to order, connector intermateability Part Number System GT C 00 A FF 36-5 P W (014) 1 2 3 4 5 6 7 8 4. Designation for Mounting Hole - Receptacle Only FF - UN Threads FM - Metric Threads No designation for standard through hole mounting holes. 5. Shell Size and Arrangement See pages 48-50 6. Contact Style P designates pin contacts S designates socket contacts 7. Alternate Position W, X, Y and Z - See page 51. No suffix required for normal position. 8. Connector Modification* Omit for standard olive drab with silver plated contacts i.e.: (A31) Gold/nickel plated contacts (025) Black zinc cobalt (LC) Less contacts (072) Gray Zinc Nickel (116) Solder contacts less pre-filled solder (724) Gray Zinc Nickel with solder contacts less pre-filled solder **RoHS Compliant** (RDS) RADSOK® contacts (crimp sockets only)* 1. Contact Style and Insert Material C = Crimp CN = Crimp with stainless steel S = Solder SN = Solder with stainless steel CY = Crimp with Viton SY = Solder with Viton CL = Crimp with low smoke/flame retardant inserts SL = Solder with low smoke/flame retardant inserts No designation required for Neoprene components 2. Shell Style 01 -  Inline receptacle 02 -  Box mount receptacle 030 -  Square flange receptacle - rear panel mount 05 -  Dummy receptacle 06 -  Straight plug 07 -  Jam nut receptacle - rear panel mount 070 -  Jam nut receptacle with accessory threads 08 -  90° angle plug TB -  Thru-bulkhead receptacle 3. Connector Class - For details, see pages 20-47 A - Adapter for accessory attachment, non-environmental AF - Adapter, clamp for individual wires, non-environmental AMI - Threaded internal adapter. Thread style/size to be specified at the end of the PN - Ex (M20) or (PG21) CF - Adapter, jacketed cable clamp, environmental CFZ - Adapter, jacketed cable clamp, individual wire sealing grommet, environmental F - Adapter, clamp for individual wires, individual wire sealing grommet, environmental. G - Adapter for heat shrink tubing, individual wire sealing grommet, environmental GTTB - Thru bulkhead receptacle, accepts mating plug on both sides R - Adapter for accessory attachment, individual wire sealing grommet, environmental R - (02) No thread, no accessories, environmental with panel sealing gasket RMI - Threaded internal adapter with individual wire sealing grommet. Thread style/size to be specified at the end of the PN - Es (M20) or (PG21) RV - Adapter, individual wire sealing grommet, environmental SB - Adapter for termination of EMI/RFI shielded braid with heat shrink tubing or boot, individual wire sealing grommet, environmental * Consult page 54 for RADSOK® Technology Advantages. MATEABILITY WITH IDENTICAL CONTACT ARRANGEMENTS Connector Style 79 Mateable with Style GT01 GT06 / 062 / 064  / 065  / 08 GT02 GT06 / 08 GT030 GT06 / 08 GT06 GT01 / 02 / 030 / 05 / 070 / TB GT07 / 070 GT06 / 08 GT08 GT01 / 02 / 030 / 05 / 070 / TB GTTB GT06 / 08 GT Connectors – accessories ACA-B/GT Connectors – accessories 10-40450, 10-36675, 10-580649 sealing gaskets PLAIN FLAT GASKET The Amphenol® plain flat gasket of synthetic rubber material is provided to take complete advantage of waterproof and pressure sealing features. It is for use with the flange mounted receptacle. .031± .010 .08 ± 0.3 mm C A .020 ± .004 0.5 ± 0.1 mm SHIELDING A C LOW TEMPERATURE GASKET This gasket is provided for applications where the major requirement is resistance to the injurious effects of extremely low temperature. Even at temperatures as low as –67°F this gasket retains its resiliency and will seal a pressure differential of 30 psi. .031 ± .010 0.8 ± 0.3 mm LOW TEMPERATURE D 4 HOLES B SHIELDING GASKET This flat gasket is provided to give the maximum in connector performance. Its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sensitivity and low signal strength while retaining the sealing characteristics of the plain gasket. This gasket is for use with the flange mounting receptacle. Additional versions of gaskets are available including low smoke zero halogen, and also high temperature and conductive types. Consult Amphenol lndustrial Operations, Sidney NY, for further information. Installation Dimensions MS Shell Size A ± .010 Front Panel Versions B + .016 – .000 14S .906 .875 16 .969 10SL 16S 18 20 22 24 28 32 36 40 .719 .969 1.063 1.156 1.250 1.375 1.563 1.750 1.938 2.188 .625 1.000 1.000 1.125 1.250 1.375 1.500 1.750 2.000 2.188 2.438 Rear Panel Version B + .016 – .000 .724 .976 1.087 1.087 1.220 1.354 1.480 1.618 1.846 2.110 2.354 2.587 Order Data for Front Panel Mount Gaskets C + .016 – .000 D ± .010 1.188 .172 1.000 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .172 .172 .172 .203 .203 .203 .203 .203 .219 .219 .219 Front Panel Plain Version 10-40450-10 10-40450-10S 10-40450-16 10-40450-16S 10-40450-14 10-40450-18 10-40450-20 10-40450-22 10-40450-24 10-40450-28 10-40450-32 10-40450-36 10-40450-40 MS Shell Size 10SL A ± 0.2 18.2 15.9 14S 23.0 22.2 16 24.6 25.4 16S 18 20 22 24 28 32 36 40 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.6 25.4 Rear Panel Version B + 0.4 – 0.0 C + 0.4 – 0.0 Rear Panel Plain Version D ± 0.2 10-580649-11 4.36 10-580649-16 4.36 10-580649-20 5.15 10-580649-24 5.15 10-580649-32 5.56 10-580649-40 18.4 25.4 4.36 10-580649-14 27.6 32.5 4.36 10-580649-18 24.8 27.6 30.2 32.5 31.0 35.0 5.15 10-580649-22 34.9 37.6 41.2 5.15 10-580649-26 28 44.45 46.9 50.8 5.15 10-580649-36 59.8 63.5 5.56 28.57 31.75 38.1 34.4 41.1 50.8 53.6 61.92 65.7 55.57 10-40450-14S 10-40450-18S 10-40450-20S 10-40450-22S 10-40450-24S 10-40450-28S 10-40450-32S 10-40450-36S 10-40450-40S Order Data for Rear Panel Mount Gaskets Installation Dimensions Front Panel Versions B + 0.4 – 0.0 Front Panel Shielding Version 38.1 44.5 57.2 69.9 5.56 79 80 Rear Panel Low Smoke ZH Version LS-580649-11 LS-580649-14 LS-580649-16 LS-580649-18 LS-580649-20 LS-580649-22 LS-580649-24 LS-580649-26 28 LS-580649-32 LS-580649-36 LS-580649-40 Front Panel Low Temperature Version Front Panel Low Smoke ZH Version 10-36675-14 LS-40450-14 10-36675-10 10-36675-16 10-36675-18 10-36675-20 10-36675-22 10-36675-24 10-36675-28 10-36675-32 10-36675-36 10-36675-40 LS-40450-10 LS-40450-16 LS-40450-18 LS-40450-20 LS-40450-22 LS-40450-24 LS-40450-26 LS-40450-32 LS-40450-36 LS-40450-40 ACA-B/GT Connectors – accessories receptacle protection caps • Protective metal caps which seal the front of receptacles • Includes a chain for retention of the cap at the required location • All ACA( )-B and GT receptacles * 10-580902-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580902-113. LL Table 1: Inches Shell Size 11 D 14 16 17 18 20 22 24 28 32 Finish Olive drab cadmium plate Suffix -XX3 Black zinc cobalt -XXY Electroless nickel Gray zinc nickel 36 40 D + .020 – .000 .173 L Max. .700 .173 .700 .173 .173 .173 .173 .173 .173 .220 .261 .261 .261 N Max.   .905 LL Approx. 5.000 1.280 5.000 .700 1.181 .900 1.280 .900 .900 .900 .900 .900 .900 .900 .900 1.457 1.594 1.713 1.850 2.126 2.382 2.638 2.874 5.000 5.000 5.000 5.000 5.000 5.000 7.480 7.480 7.480 7.480 Table 2: Millimeters -XXG Shell Size 11 -XXFL 14 16 17 18 20 22 24 28 32 36 40 D + 0.5 – 0.0 4.4 L Max. 17.8 N Max. 23.0 LL Approx. 127 4.4 17.8 32.5 127 4.4 4.4 4.4 4.4 4.4 4.4 5.6 5.6 5.6 5.6 All dimensions for reference only. 81 17.8 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 30.0 32.5 37.0 40.5 43.5 47.0 54.0 60.5 67.0 73.0 127 127 127 127 127 127 190 190 175 190 ACA-B/GT Connectors – accessories plug protection caps • Protective metal caps which seal the front of plugs • Includes a chain for retention of the cap at the required location • All ACA( )-B and GT plugs * 10-580903-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580903-113. LL Table 1: Inches Shell Size 11 D 14 16 17 18 20 22 24 28 32 Finish Olive drab cadmium plate Suffix -XX3 Black zinc cobalt -XXY Electroless nickel Gray zinc nickel 36 40 D + .020 – .000 .157 L Max.   .945 .157   .945 .157 N Max.   .807 LL Approx. 5.000 1.169 5.000   .945 1.059 .157 1.260 1.169 .189 1.260 .157 .189 .189 .220 .261 .261 .261 1.260 1.260 1.260 1.260 1.260 1.260 1.260 1.303 1.437 1.563 1.701 1.929 2.193 2.437 2.665 5.000 5.000 5.000 5.520 5.520 5.520 7.480 7.480 7.480 7.480 Table 2: Millimeters -XXG Shell Size 11 -XXFL 14 16 17 18 20 22 24 28 32 36 40 D + 0.5 – 0.0 4.0 L Max. 24 N Max. 20.5 LL Approx. 127 4.0 24 29.7 127 4.0 4.0 4.0 4.8 4.8 4.8 4.8 5.6 5.6 5.6 All dimensions for reference only. 82 24 24 24 32 32 32 32 32 32 32 26.9 29.7 33.1 36.5 39.7 43.2 49.0 55.7 61.9 67.7 127 127 127 140 140 140 190 190 190 190 ACA-B/GT Connectors - accessories GT – accessories rear mounting data, panel cut-out dimensions, sealing plugs, sealing ranges REAR MOUNTING DATA MAXIMUM PANEL THICKNESS GROMMET HOLE SEALING RANGES (mm) Inches 16 1.62 – 3.3 .064 – .130 12 2.89 – 4.31 4 6.9 – 9.3 8 0 D MAX. Sealing Range Hole Size .114 – .170 4.16 – 6.47 .164 – .255 .272 – .370 10.5 – 13.97 .415 – .550 Dimension D GT00/020 Size 10SL GT030 Inches (mm) Inches (mm) .146 3.70 .303 7.70 .146 14S 16S 3.70 .146 16 3.70 .145 18 22 .145 24 .207 28 32 .241 36 .241 40 Order No. 10-405996-16 10-405996-12 10-405996-8 20-16 Blue 8 10-8 Red 0-2 Yellow 10-405996-4 4 10-405996-0 A Dia. ± 0.2 2.1 3.1 4.7 7.9 11.2 ** ± .020 (in.) Color Code 16 12 +.030 .135 –.025 in. + 0.8 mm 3.4 – 0.6 A DIA. Wire Size 14-12 0 Millimeters B ± 0.1 4-6 8.0 11.9 10.5 *** ± 0.5 (mm) 10SL 14S A Dia. ±.010 .083 16S/16 Inches 20 B ±.005 C ±.010 .133 .564** .185 .315 .470 .440 .605 1.000 .121 .310 .171 .415 .126 .126 B ±.004 .969 15/16 1 1/8 1 1/14 1.21 1.157 1 3/16 1 3/8 1 1/2 1.45 .906 1.252 32 36 40 .169 .169 .169 E 7/8 .126 .146 D Dia. Jam Nut 070 1 3/4 22 .146 C Dia. Jam Nut 070 11/16 1.063 .126 C Dia. Rear Mount 030 .717 .126 28 .470 .126 02, 020, 00, 030 18 24 .564** A Dia. Hole Size Front Mount 02, 00, 020 1.374 1.563 1.752 1.937 2.185 13/16 1 1/16 1 5/16 1 7/16 1 1 1/4 1 1/2 1 5/8 1 11/16 1 7/8 1 15/16 2 1/8 2 1/8 2 3/8 2 3/8 2 5/8 1 1/8 1 3/8 1 5/8 1 3/4 .83 1.08 1.32 1.57 1.70 2 1.95 2 1/2 2.45 2 1/4 2 3/4 2.20 2.70 All dimensions for reference only. 14.3*** 15.4 Blue Shell Size 45O C ± 0.2 3.4 4.3 Yellow Connector Styles 7.85 C Sealing plugs are used to fill unused holes in multi-holed grommet configurations. PANEL CUT-OUT DIMENSIONS 7.85 .309 B DIA. Contact Size 7.85 .309 6.02 SEALING PLUG 10-405996-XX 8.70 .309 6.10 .237 7.70 .343 6.10 D DIA. E TYP. 7.70 .303 5.25 C DIA. 7.70 .303 5.25 .207 7.70 .303 3.70 B TYP. 6.15 .303 3.70 A DIA. 7.70 .242 3.70 .145 7.70 .303 3.70 .145 20 .303 14.3*** 11.9 25.4 85 83 GT Connectors – accessories MS3057-A style cable clamp • • Concentric cable clamps, insure strain relief and central location of the cable Can be used with bushing MS3420 G D Q E F V B Inches Part Number 97-3057-1004 Used with Shell Size 10SL Used with Bushing .812 MS3420-8 .568 .395 .945 MS3420-6 97-3057-1010 18 MS3420-10 97-3057-1016 24 - 28 97-3057-1012 97-3057-1020 97-3057-1024 10-824810-028 .442 .633 .395 .395 20 - 22 MS3420-12 .758 .395 32 MS3420-20 1.256 .460 MS3420-28 1.625 36 40 G .395 14S 16 - 16S D .315 97-3057-1007 97-3057-1008 B MS3420-4 MS3420-16 .948 MS3420-24 1.380 F .866 .875 1.063 .945 1.244 .6250-24 UNEF .7500-20 UNEF 1.145 .8750-20 UNEF 1.0000-20 UNEF .945 1.475 1.1875-18 UNEF 1.094 2.055 1.7500-18 UNS .395 1.031 .520 1.157 .520 V Thread Class 2B 1.685 1.700 1.4375-18 UNEF 2.265 2.0000-18 UNS 2.683 2.2500-16 UN Millimeters Part Number 97-3057-1004 97-3057-1007 97-3057-1008 Used with Shell Size 10SL MS3420-8 14.4 10.0 24.0 29 20 - 22 MS3420-12 19.2 10.0 32 MS3420-20 31.9 11.7 16 - 16S 24 - 28 10-824810-028 F 22 97-3057-1016 97-3057-1024 G 20.6 14S 36 40 MS3420-4 D 10.0 18 97-3057-1020 B 8.0 97-3057-1010 97-3057-1012 Used with Bushing MS3420-6 11.0 MS3420-10 16.1 MS3420-16 24.1 MS3420-24 35.0 MS3420-28 41.3 All dimensions for reference only. 82 84 10.0 22.2 27 10.0 24.0 32 10.0 26.2 43 13.2 13.2 24.0 27.8 29.4 42.8 37 52 58 68 GT Connectors – accessories MS3420 bushing • • Bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires Can be telescoped for smaller cable diameters A D 1.6mm .062 in. C B Inches Part Number MS3420-3 MS3420-4 MS3420-6 MS3420-8 Used with Cable Clamp M85049/41-3A M85049/41-4A M85049/41-6A M85049/41-8A A .130 .220 .312 .437 B .210 .302 .427 .552 MS3420-10 M85049/41-10A .562 .615 MS3420-16 M85049/41-16A .750 .927 MS3420-12 MS3420-20 MS3420-24 MS3420-28 M85049/41-12A M85049/41-20A M85049/41-24A M85049/41-28A .625 .937 1.250 1.375 C .379 .505 .619 .744 .889 D 2.875 2.750 2.625 2.500 2.375 .740 1.084 2.250 1.240 1.598 2.000 1.365 1.614 1.314 1.847 2.085 2.125 1.875 1.750 Millimeters Part Number Used with Cable Clamp A B MS3420-3 M85049/41-3A 3.30 5.3 MS3420-6 M85049/41-6A 7.92 10.8 14.27 15.6 MS3420-4 MS3420-8 MS3420-10 MS3420-12 MS3420-16 MS3420-20 MS3420-24 MS3420-28 M85049/41-4A M85049/41-8A M85049/41-10A M85049/41-12A M85049/41-16A M85049/41-20A M85049/41-24A M85049/41-28A 5.58 11.09 15.87 19.05 23.79 31.75 34.92 All dimensions for reference only. 83 85 C 73.0 15.70 66.8 7.7 12.80 14.0 18.90 18.8 23.5 31.5 34.7 41.0 D 9.60 22.58 27.50 33.40 40.60 46.90 52.90 69.8 63.5 60.3 57.1 53.9 50.8 47.6 44.4 GT Connectors – accessories MS3057-C style (10-350349) cable clamp • • • Waterproof clamp for jacketed cables Provides mechanical strain relief plus concentric clamping over a wide range of cable sizes A neoprene* gland seal ensures a waterproof seal on the cable jacket * Other materials available V G F A B E To reduce diameter B, use rubber brushing MS3420A Part Number 10-350349-123 Used with Shell Size A Thread Class 2B in inches V Thread Class 2A in inches 10SL .6250-24 UNEF 10-350349-143 14S .7500-20 UNEF 6-32 UNC 10-350349-163 16 & 16S .8750-20 UNEF 6-32 UNC 10-350349-183 18 1.0000-20 UNEF 6-32 UNC 10-350349-203 20 & 22 1.1875-18 UNEF 8-32 UNC 10-350349-243 24 & 28 1.4375-18 UNEF 8-32 UNC 10-350349-323 32 1.7500-18 UNS .250-20 UNC 10-350349-363 36 2.0000-18 UNS .250-20 UNC 10-350349-403 40 2.2500-16 UN .250-20 UNC Used with Bushing 6-32 UNC MS3420-4A MS3420-6A MS3420-4A Bushing Opening Inches Busing Opening Millimeters Open Closed Open Closed .312 .219 .114 .020 7.93 5.56 2.89 0.50 .219 .010 5.56 MS3420-8A MS3420-6A .437 .312 .220 .085 11.10 7.93 MS3420-12A MS3420-8A .541 .437 .270 .177 13.74 11.10 MS3420-10A MS3420-6A MS3420-16A MS3420-12A MS3420-8A MS3420-20A MS3420-16A MS3420-12A MS3420-24A MS3420-20A MS3420-16A MS3420-28A MS3420-20A MS3420-16A .437 .312 .197 .085 .748 .541 .437 .620 .441 .273 1.122 .937 .748 Part Number 10-350349-123 10-350349-143 Used with Shell Size 10SL 14S 10-350349-163 16 & 16S 10-350349-203 20 & 22 10-350349-183 10-350349-243 10-350349-323 10-350349-363 10-350349-403 18 24 &28 Open Closed E ± .016 .438 .230 .874 .312 .531 .625 .748 10.90 6.60 4.72 28.50 23.80 19.00 17.30 12.80 9.10 .815 512 368 .315 .378 .445 .748 1.000 1.122 1.311 F ± .008 1.016 1.272 11.12 1.390 15.87 .890 1.106 1.220 1.469 1.272 1.272 1.406 .610 1.559 1.654 1.516 1.378 .921 2.122 2.248 2.031 1.250 40 1.624 .921 1.177 1.874 2.374 2.126 2.500 All dimensions for reference only. 84 86 1.764 2.031 15.74 11.20 6.93 31.75 23.80 19.00 20.70 13.00 9.34 Millimeters G + .020 – .000 .937 32 36 .094 6.85 4.50 19.00 13.74 11.10 Inches B 5.00 2.15 23.80 19.00 13.74 .681 .504 .358 1.250 .937 .748 5.60 2.15 11.10 7.93 .429 .260 .186 .937 .748 .541 0.25 B Open 7.93 Closed E ± 0.4 F ± 0.2 G + 0.5 – 0.0 5.84 22.2 25.8 32.3 2.38 19.0 8.00 19.00 11.30 33.3 37.3 35.7 31.75 23.40 47.6 54.0 44.8 23.80 35.00 41.25 15.50 23.40 29.90 28.5 39.6 53.9 60.3 28.1 32.3 13.48 9.60 25.4 22.6 31.0 42.0 57.1 63.5 32.3 35.3 38.5 51.6 51.6 ACA-B/GT accessories glands Nylon Cable Glands Metal Cable Glands Material: Seal Ring: Thread Type: Temp Range: Material: Clamping: Seal Ring: Current Colors: Nylon 66 (UL Approved 94V-2) UL 94V-2(UL Approved 94V-2) Metric , PG, NPT Static: - 40°C ∼ +100°C Dynamic: - 20°C ∼ + 80°C Short Term: +120°C Gray, Black Nylon Cable Glands AIGO Part AIO-CSM12 AIO-CSM16 AIO-CSM18 AIO-CSM20 AIO-CSM22 AIO-CSM24 AIO-CSM25 AIO-CSM30 AIO-CSM32 AIO-CSM33 AIO-CSM40 AIO-CSM50 AIO-CSM72 AIO-CSIN1/2 AIO-CSIN3/4 AIO-CSIN5/4 AIO-CSIN3/2 AIO-CSGIN1/2 AIO-CSGIN3/4 AIO-CSGIN1 AIO-CSGIN5/4 AIO-CSGIN3/2 AIO-CSGIN5/2 AIO-CSPG7 AIO-CSPG9 AIO-CSPG11 AIO-CSPG13.5 AIO-CSPG16 AIO-CSPG21 AIO-CSPG29 AIO-CSPG36 AIO-CSPG42 Thread “A” Max ”d” (mm) Cable Range (mm) Thread “L” (mm) M12x1.5 M16x1.5 M18 1.5 M20 1.5 M22 1.5 M24 1.5 M25x1.5 M30 2.0 M32 1.5 M33 2.0 M40 1.5 M50 1.5 M72 2.0 NPT1/2” NPT3/4” NPT1”1/4” NPT1”1/2” G1/2” G3/4” G1” G1”1/4” G1”1/2” G2”1/2” PG7 PG9 PG11 PG13.5 PG16 PG21 PG29 PG36 PG42 8 8 10 12 14 14 18 18 25 25 32 38 57 12 18 32 32 12 18 25 28 32 57 6.5 8 10 12 14 18 25 32 38 3 – 6.5 4–8 5 – 10 6 – 12 10 – 14 10 – 14 13 – 18 13 – 18 18 – 25 18 – 25 22 – 32 32 – 38 51 – 57 6 – 12 13 – 18 22 – 32 22 – 32 6 – 12 13 – 18 18 – 25 21 – 28 22 – 32 51 – 57 3 – 6.5 4–8 5 – 10 6 – 12 10 – 14 13 – 18 18 – 25 22 – 32 32 – 38 8 8 9 9 10 10 10 11 11 11 13 14 16 13.6 14.1 17.3 17.3 9 11 11 13 13 14 8 8 8 9 10 11 11 13 14 Brass with Nickel; Brass with Tin/Nickel UL approved PA6, 94V-0 UL 94V-2 (UL approved NBR, 94V-2;UL approved DOW CORNING RUBBER, 94V-0 Thread Type: Metric, PG, NPT Protective: IP68 (tighten with o-ring) Temp Range: - 40°C ∼ +100°C Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M Torque (N-M) to of tighten hex andthe cap nuts: N-M hub: 4.17N-M Torque Value Value (N-M) fitting to3.0-4.5 the threaded M12, M16, M20 are UL UL recognized recognized under underfile file##E339605 E339605 Metal Cable Glands Clamp ”H” Spanner "S" (mm) (mm) 20 22 25 30 30 30 30 33 38 39 48 50 75 28 32 46 50 26 27 33 48 48 75 20 22 24 26 28 33 38 48 52 AIGO Part 15 19 22 24 27 27 33 33 42 42 54 60 80 24 33 54 54 24 33 42 54 54 80 15 19 22 24 27 33 42 54 60 AIO-CSJM12 AIO-CSJM14 AIO-CSJM16 AIO-CSJM18 AIO-CSJM20 AIO-CSJM22 AIO-CSJM24 AIO-CSJM25 AIO-CSJM27 AIO-CSJM30 AIO-CSJM32 AIO-CSJM36 AIO-CSJM40 AIO-CSJM50 AIO-CSJM63 AIO-CSJM72 AIO-CSJM80 AIO-CSJM90 AIO-CSJIN1/2 AIO-CSJIN3/4 AIO-CSJIN5/4 AIO-CSJIN3/2 AIO-CSJIN2 AIO-CSJIN5/2 AIO-CSJIN3 AIO-CSJGIN1/2 AIO-CSJGIN3/4 AIO-CSJGIN1 AIO-CSJGIN5/4 AIO-CSJGIN3/2 AIO-CSJGIN2 AIO-CSJGIN5/2 AIO-CSJGIN3 AIO-CSJPG7 AIO-CSJPG9 AIO-CSJPG11 AIO-CSJPGM16 AIO-CSJPG13.5 AIO-CSJPG16 AIO-CSJPG21 AIO-CSJPG36 AIO-CSJPG42 AIO-CSJPG48 For additional information on other products available refer to our Cord Grips & Cable Glands, Catalog 12-055. 87 Thread “A” Max ”d” (mm) Cable Range (mm) Thread “L” (mm) M12x1.5 M14x1.5 M16x1.5 M18x1.5 M20x1.5 M22 1.5 M24 1.5 M25x1.5 M27 2.0 M30 2.0 M32 1.5 M36 2.0 M40 1.5 M50 1.5 M63 1.5 M72 2.0 M80 2.0 M90 2.0 NPT1/2” NPT3/4” NPT1”1/4” NPT1”1/2” NPT2” NPT2 1/2” NPT3” G1/2” G3/4” G1” G1”1/4” G1”1/2” G2” G2 1/2” G3” PG7 PG9 PG11 M16x1.5 PG13.5 PG16 PG21 PG36 PG42 PG48 6.5 8 9 10 12 14 14 18 18 18 25 25 32 38 44 52 60 70 12 18 32 32 44 52 70 12 18 25 32 32 44 52 70 6.5 8 10 10 12 14 18 32 38 44 3 – 6.5 4–8 6–9 5 – 10 6 – 12 10 – 14 10 – 14 13 – 18 13 – 18 13 – 18 18 – 25 18 – 25 22 – 32 32 – 38 37 – 44 46 – 52 52 – 60 62 – 70 6 – 12 13 – 18 22 – 32 22 – 32 37 – 44 46 – 52 62 – 70 6 – 12 13 – 18 18 – 25 22 – 32 22 – 32 37 – 44 46 – 52 62 – 70 3 – 6.5 4–8 5 – 10 6.2 – 10 6 – 12 10 – 14 13 – 18 22 – 32 32 – 38 37 – 44 6.2 5 6.3 7 8.3 8 8 7.8 8 8 10 10 10 11 12 16 20 20 13.6 14.1 17.3 17.3 17.7 23.7 26 8 8 10 10 10 12 16 20 6 7 7 6.5 8 8 8 10 11 12 Clamp ”H” Spanner "S" (mm) (mm) 15 19 20 20 20 24 24 23 26 26 27 34 39 39 43 47 57 57 25 26 41 46 46 58 58 24 27 34 39 39 44 47 55 18 21 20 22 24 25 26 38 42 44 14 15 18 22 22 24 27 30 30 32 40 40 50 60 67 75 90 100 24 30 50 50 65 80 100 24 30 40 50 50 65 82 100 14 18 22 20 22 24 30 50 60 65 Amphenol ® GT Connectors with RADSOK technology Amphenol offers Amphe-Power Connectors, high amperage capability connectors designed for the most demanding industrial and transportation applications. The GT connectors, in most shell styles, can be enhanced with RADSOK contacts that handle up to 150% higher amperages than standard contacts. The RADSOK contact is a hyperbolic, stamped grid configuration within the socket. As male pin is inserted, axial members in the female half deflect, imparting high current flow across the connection with minimal voltage loss. This design ensures a large, coaxial, face-to-face surface area engagement and provides higher current capacity with minimized temperature rise. The RADSOKʼs strongest benefit is its very low mill-volt drop because of the intimate contact provided by the spring force of the grid. RADSOK contacts are available in size 8 (69 amps), size 4 (120 amps), and size 0 (250 amps). Current Amphe-Power lines support from 50A to 500A continuous duty. Hybrid arrangements with RADSOK and power contacts can be tailored to meet customer needs. For more information on GT Amphe-Power Connectors, request Brochure SL-391. Amphenol ®GT Amphe-Power Connectors with RADSOK ® high amperage contacts The RADSOK Contact Advantage: • • • • • Low contact Resistance Low milli-volt drop performance Higher current capacity with minimized temperature rise. Reliability under vibration and shock. High quality, consistency and lower cost Amphe-Power™ Amphe-GTR The Amphe-Power™ GT series provides the benefit of a GT connector in a high performance composite material. The GT-R is listed to UL/CUL 2238 Standard, Control Number 19VP. It also meets all of the specifications for high power process control and server applications. Performance level is the same as that of the GT series. RADSOK contacts enable an increased current rating of 120A on individual contacts, and a standard PG thread achieves an IP67 seal rating. Amphe-Power Composite GTR Connector Compression (setscrew) wire termination to the 4/6AWG or 8/ 10AWG conductors allows for easy field replacement of pin or socket contacts. It also provides for easy complete plug or receptacle assemblies, all without a need for specialized tooling. Power GT The Power GT is a modification to the GT series incorporating three 8.0mm RADSOK contacts mounted in a common termination to busbar or cable, enhanced to an ultra-high current density in a compact shell size 28 layout. This design created the first TUV “finger-proof” 500A connector in the marketplace with the “dead-front” pin design to prevent contact with live circuits. In environmental versions, this connector achieves IP67 performance. The ninety-degree wire orientation on the plug provides low-profile mounting for tight packaging requirements. This plug is designed to be over-molded, and can also be fitted with mechanical hardware for individual requirements. Power GT, Finger-Proof 500A Connector 89 88 Amphenol ® GT Connectors special applications GTC-M Series - The GT with Metal Clip Inserts Amphenolʼs GTC-M series combines the GT reverse bayonet connector and the rear release metal clip retention system which is used in the Amphenol®/Matrix® MIL-C-5015 connector line. Another benefit is the captivated coupling nut assembly which allows unmating without the rear accessories attached. Improved environmental sealing is achieved with this series. The crimp joint is covered by a three-webbed fluorinated silicone grommet that seals on the wires without the necessity of an additional sealing clamp. An interfacial seal with conical towers on the pin insert matches with recesses on the socket; a match that provides the popular “cork and bottle” seal during mating. The grommet and the interfacial seal provides adequate sealing during environmental extremes. The GTC-M series is intermateable and intermountable with the standard GT series, and it uses standard M85049 style rear accessories. For more information on the GTC-M Series, request Product Data Sheet #181. Amphenol ® GTC-M with Metal Clip Inserts GT-PC Connectors for High Voltage Power Applications The Amphenol® GT-PC connectors were developed for use in the High Voltage Power Distribution industry. Incorporating all the standard features of the popular GT series, these connectors will prevent accidental electrical shocks to the technicians. “Dead Front” pin contacts in size 0 are recessed into a socket insert, preventing inadvertent contact with a live circuit. Higher amperage levels are provided - up to 100 amps per contact. The GT-PC series has been UL approved. “First Mate - Last Break” features on one or more of the pins provide an additional measure of operator safety. Currently there are 5 insert patterns available. Consult Amphenol Industrial Operations for more information. GT Connectors for the HMI Lighting Industry Amphenol provides GT connectors for the rugged use experienced during stage shows and other entertainment events, even outside in the elements. The same 3-point bayonet coupling system and the same ruggedness to survive 2000 mating cycles are provided. The unique features of this connector series include color-coded receptacle shells with matching backshells on the cable plugs. The colors can be matched to specific wattage cables and/or light systems. A wide selection of environmental adapters designed to seal on the outside diameter of specific cable diameters can be fitted to the backshells. Applications for these connectors include power and control of lighting trusses, and portable power and dimmer racks. For more information request Product Data Sheet #174. Amphenol ® GT-PC Connectors for High Voltage Power Applications Amphenol ® GT Connectors for the HMI Lighting Industry 90 89 Additional Amphenol Industrial Connectors for the Rail Industry ARCL Series Amphenol has developed a heavy duty 5015 type connector with 38999 Series III type coupling for use in mass transportation and heavy equipment applications. The ARCL Series has the same electrical characteristics as 5015 standard product but it has rugged ratchet double start stub threads. These rugged double stub threads eliminate mis-mating and provide for easy cleaning. Other features/benefits of the ARCL connector series: • • • • • • • 5 key/keyway alignment feature. Operating temperature is from –55°C to +125°C. Operating voltage is to 3000 VAC (RMS) at sea level. Crimp and solder termination available. 5 shell styles with all the 5015 insert patterns available. Supplied with low smoke, low halogen inserts which are flame retardant, but also can be supplied with standard 5015 inserts. Wide variety of backend accessories for all styles of cable and conduit, and a variety of cable strain reliefs including over-molding and heat shrink boots. RADSOK high amperage sockets can be incorporated. Amphenol ® ARCL Series Star-Line® Series Amphenol/Pyle Star-Line Series is another heavy duty environmental cylindrical connector widely used in mass transportation and in the oil exploration market. Ideal for high amperage and high density control and instrumentation applications, this series has features and benefits as follows; • • • • • • • • Hard anodic coating for dielectric strength with heat and corrosion resistance. Operating temperature is from –67°F to +257°F. Amperages up to 1135 amps at 1000VAC or DC rating available. Double lead Acme threads provide complete coupling in one turn of the coupling nut, and do not clog under adverse weather conditions. Solder, crimp and pressure terminals; circuit breaking power and control types available. UL listed and CSA listed for circuit breaking capability. 5 shell styles with over 150 insert patterns. 3 retention styles with captive contacts or insertable/removable contacts. Variety of backend accessories including basketweave cable grips, straight or angled adapters and receptacles mounted to junction boxes. Amphenol® Star-Line® Series Over-Molded Cable Cables can be designed with custom overmold to Amphenol Industrial cylindrical connectors for almost any application in mass transportation or any other types of industrial markets. Overmold seals to the rear of the connector and to the cable jacket to provide moisture sealing. Cables may be designed to meet any environmental performance requirement and any electrical performance requirement. Variety of materials are available: neoprene, hypalon and others. Consult Amphenol Industrial Operations for further information on these industrial products. 91 90 Over-Molded Cable for Industrial Connectors Additional Amphenol Industrial Products for the Rail Industry, cont. Trans-Power® Connectors Amphenol/Pyle provides head-end power connectors for commercial rail systems. These meet Amtrak specification D-77-24, APTA #RP-E-016. Features and benefits include: • • • • • • Slip-fit, double seated for environmental protection. Retention by receptacle cover or optional accessories. Crimp termination per Amtrak and APTA specifications. Socket contacts provide uniform pressure for low mating and unmating forces, low voltage drop, consistently low temperature rise and shock resistance. Operating ambient temperature is –57°F to +110°F. Electrical performance up to 600 volts, 400 Amps. All molded elastomeric rubber body on jumper. Raintight per U/L standard. Amphenol ® Trans-Power® Connectors for Rail Mass Transit 27 Pole Train-line Receptacles and Jumpers Amphenol/Pyle 27 pole MU (multiple unit) and communication receptacles and jumpers are provided for rail applications. Jumpers are either standard car to car, between locomotives or between locomotives and lead cars. These products are designed to Amtrak and APTA specifications. Other design features and benefits: • • • Locomotive jumpers are keyed differently from all other 27 pole jumpers to prevent mis-mating. They also have identification markings to distinquish their proper usage on locomotives. Receptacles are a rugged aluminum housing with a spring loaded cover. Receptacles can be provided with or without leads. Push-pull mating. Amphe-Y Composite Molded Connectors Amphenol® 27 Pole Train-line Receptacle and Jumpers for Rail Mass Transit The Amphe-Y is a new Amphenol product for mass transit application that uses RADSOK high amperage sockets. It is a molded interconnect system that provides rapid and safe connect and disconnect for traction motor installation and repair. This packaging solution consists of a molded base plate, a silverplated copper “connector” with RADSOK contacts, and a molded top cover. When attached to the traction motor, this unit creates a safe, reliable and efficient means of conducting high amperage current from the third rail or catenary to the propulsion controller. Each “leg” of this assembly can safely accommodate up to 1000 amps through the 18mm RADSOK contacts. Amphenol has wide capabilities in designing specialty molded interconnect solutions, such as the new Amphe-Y, for power and/ or harsh environment applications. Custom designs can include bayonet, theaded or push-pull coupling with crimp solder or pressure termination. They can utilize RADSOK or standard contacts and can be designed to meet specific environmental sealing requirements and temperature ratings. Amphe-Y Molded Interconnect System for Rail Mass Transit Consult Amphenol Industrial Operations for further information on these industrial products. 92 91 AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. IC-4-1 HKA 1-2016 Amphenol® 97 Series Connectors are UL recognized and CSA recognized.