HDASF102YC-000

HDAS Series High performance & versatile Board to Board 1,905mm / .075” pitch connector sity -den m h g i H 5m 1.90 gered g a str rid g Description Amphenol Socapex HDAS is a versatile monolitic connector from 11 to 253 contacts. Designed to reach MILDTL-55302 performances, HDAS is the right connector when reliability must be considered. Up to 20A with an hybrid version to mix signal, power or RF, HDAS is available with a wide range of fittings, contacts & options. Already used in every critical application. Benefits • • • • Features Dedicated to harsh environment Electrical security 1,2mm 1,27µ Au on socket, 1µ Au on pins 16mm distance between boards (YD/YD) • • • • 12 arrangements, from 11 to 253 contacts Hybrid version to mix signal, power & coax PC Tail, press fit, solder cup & surface mount contacts Meet & Exceed MIL-DTL-55302 Configurations Online configurator & 3D model download You can define references according your needs and download directly 3D models in several formats on HDAS product page in our website www.amphenol-socapex.com or scan QR code : Markets Commercial Aerospace Military Aerospace www.amphenol-socapex.com Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex Ground Vehicle C4ISR Missiles HDAS series Technical Specifications Mechanical characteristics HDAS MIL-DTL-55302 sections Backoff1 (mm) 1.2 [.0472] MAX N/A Mating force per contact (N) 0.6 < F < 0.8 § 4.5.3 Unmating force per contact (N) 0.3 < F < 0.5 § 4.5.3 500 § 4.5.9 Durability cycles Sinusoidal vibrations (200 to 2000 Hz) micro discontinuity 2ns Random vibrations (600 to 700Hz) micro discontinuity 2ns 15 g § 4.5.10 1.2 g² / Hz § 4.5.10 100 g § 4.5.10 -65 / +150 § 4.5.13 144 § 4.5.11 Shocks 6ms ½ sinus 2ns 1 :W  hen both connectors are fully mated, the backoff is the maximum distance the connectors can be unmated while functioning properly Environmental characteristics Thermal shocks (°C) Salt Spray (hours) Humidity Days Temperature (°C) Humidity rate (%) 10 25/65 90-95 § 4.5.15 Electrical characteristics Current rating per contacts (A) 4.5 Insulation resistance (at 500Vdc) (GΩ) 5 MIN § 4.5.8 Contact resistance (mΩ) 10 MAX § 4.5.12 Dielectric Withstanding Voltage (Vrms) 750 MIN § 4.5.7.1 § 4.5.5 How to order 1. 2. 3. 4. Series Connector type Number of contacts Contact termination HDAS E 41 YD 1. Series HDAS HDAS E Receptacle (Female contacts) F Plug (Male contacts) 3. Number of contacts 011 020 029 041 050 077 119 152 4 Rows 102 202 5 Rows 253 YCS YC Right angle PC tail short (plug only) Right angle PC tail standard (plug only) YDS YD Straight PC tail short Straight PC tail standard Z Blank 1 8. Hybrids Deviation Plating 6A -00 0 LF Standard, by default -50 Marking withstanding to VIGON -01 Dip tinning (SnPb or SnAg) (plug only) -02 PC tail organizer (YC* plug only) -10 Stainless steel fitting (mandatory for latch) -60 -10 & -50 deviation combined -20 Stainless steel fitting & rear potting * Not available for all configuration, please consult us. 7. Fitting / Locking / Keying 1 Female fitting receptacle Press fit / compliant (receptacle only) Solder cup, for test application only (plug only) Male fitting plug 5. Hybrids 6A 7. Fitting / locking / Keying -00 4. Contact termination YP 6. 6. Deviation 2. Connector type 3 Rows 5. With 6 special cavities (applicable only with 41 signal contacts) If no special cavities Connectors are always delivered with non assembled fittings : RoHS compliant Blank LFM We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Standard 4 Intermediate D ¼ turn locking, locking on male fitting side Straight according to contact termination, for PCB H Locking by screw, locking on female fitting side Straight fitting for PCB or flexible circuit I Locking by screw, locking on female fitting side F Locking by screw, locking on female fitting side Straight according to contact termination, for PCB L Latch 0 Standard 2 No keying on male guide (plug only) E ¼ turn locking, locking on male fitting side Straight fitting for cable or flexible circuit G Locking by screw, locking on female fitting side Straight or right angle fitting according to contact termination, for PCB J Locking by screw, locking on female fitting side Straight or right angle fitting according to contact termination, for chassis, motherboard, jumper or cable L Latch 8. Plating LF Amphenol Socapex 948, promenade de l’Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 00 contact@amphenol-socapex.fr 0 Tin lead on receptacle Gold on plug -000 SnPb dip tinning on plug Bright pure Sn on receptacle SnAg dip tinning on plug Matte pure Sn on receptacle www.amphenol-socapex.com Follow Amphenol Socapex on social media : Designed by Amphenol Socapex DOC-000067-ANG - October 2020