HDASF119YC-000

13,5 Max F 6 7 (0,9525) Contact location (2,54) 8 Coding location A B (1,905) (106,68) (2,54) (5,08) (2,54) M1,6 Tinning: deviation X1X 2 Min for YCS 3 Min for YC C Rows e d c b a 8 Max Max (X253) (2,54) D XX0 XX2 Uncoding guide (2,45) Batch number X0X or X1X LF (SnAg bright tinning) or nothing (SnPb tinning) XX0 or XX2 1. Part: HDAS F 253 YCX-XXX XX Date code 2. External dimensions for a male plug with 253 signal contacts type YCX E 3. Connector delivered with fittings not assembled, coupling torque : 0,15Nm (1,25) Shoulder nut Scale 8 1 YC or YCS Notes: Coding guide Section A-A 4. Standard 0XX : Nickel plated over brass fittings. 5. Standard X0X : Contacts gold plated (RoHS) Deviation 1XX : Passivated stainless steel fittings. 2,5) E 5 116,5 Max HDAS F 253 YCX-XXX XX Deviation X1X : Contacts tail Hot dip tinned SnPb (non RoHS) or SnAg (RoHS) ( D 3,8 0,05 Hex 4 On flat C IN THE CONSTANT PURPOSE OF IMPROVING ITS PRODUCTS, Amphenol Socapex RESERVES THE RIGHT TO MODIFY ANY DIMENSION OR CHARACTERISTICS. FM.NPD.0036.THYEZ.PUNE rev C B 4 4 # 2,85 13,17 Max A 3 10,82 Max 14,35 Max 0,2 Type YC # 0,2 Type YCS 2 1 DRAWN BY : S Satpute ALL DIMENSIONS ARE IN MM SCALE : 2 2 3 4 5 6 UPDATED BY: S Satpute AMPHENOL SOCAPEX B.P. 29 74311 THYEZ CEDEX 7 LAST APPROVED BY: ORIGINAL DRAWING DATE : 03/09/2019 REV : T Carlier CONFIGURATION DATA ARE AVAILABLE IN PDM D PAGE : 1/2 169-PLC-1329-00 8 F 2 1 3 4 5 6 7 8 PCB Layout Face A A A 49 X 1,905 = 93,345 (X2) 0,9525 0,7 Min (X253) With metalization D E F 2,8 0,1 (X2) 2,54 2,54 2,54 B A B 1,905 5,715 5,08 C 2,1 Max IN THE CONSTANT PURPOSE OF IMPROVING ITS PRODUCTS, Amphenol Socapex RESERVES THE RIGHT TO MODIFY ANY DIMENSION OR CHARACTERISTICS. FM.NPD.0036.THYEZ.PUNE rev C C 2,54 A | B B 50 X 1,905 = 95,25 (X3) 5,715 D 106,68 0,025 2,8 Max Type YC 1,6 Max Type YCS Face A E HDAS F 253 YCX-XXX XX Scale 1,5 DRAWN BY : S Satpute ALL DIMENSIONS ARE IN MM SCALE : 3 Scale 2,5 1 2 3 4 5 6 UPDATED BY: S Satpute AMPHENOL SOCAPEX B.P. 29 74311 THYEZ CEDEX 7 LAST APPROVED BY: ORIGINAL DRAWING DATE : 03/09/2019 REV : T Carlier CONFIGURATION DATA ARE AVAILABLE IN PDM D PAGE : 2/2 169-PLC-1329-00 8 F