HPT-CAPSM

5 4 6 7 8 h 22.4 20 A HS t o R ian m Amp ol Aus t lia ra A en pl U 3 2 Co 1 15 / 3 / E 86 B 24.0 47.5 B C C  3.2 19.0 7.4 32.2 19.0 0.1 D D 24.0 0.1  23.8 0.1   3.2 E PANEL CUTOUT UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE LINEAR ANGULAR X ± 0.5 X ±1 X.X ± 0.1 X.X' ± 30' X.XX ± 0.05 X.X'X " ± 15' BREAK ALL SHARP EDGES AND REMOVE ALL BURRS F DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER. MATERIAL: FINISH: DIMENSIONS IN MILIMETRES 1 2 3 4 THIRD ANGLE PROJECTION 5 DRN: T.N DATE: 13/03/18 CKD: P.M DATE: 13/03/19 APP'D: P.M DATE: SCALE: 1:1 SIZE: A4 6 E NOTES - USE #4 OR M3 SCREW. - TIGHTEN TO 0.4 N-m ( 3.5 lb-in) Amphenol TITLE: Amphenol Australia Pty.Ltd, 22 Industry Blvd Carrum Downs, VIC 3201 PROTECTIVE CAP HPT SERIES MALE P/M SPRING LOADED 7 PART No: REV HPT-CAPSM DRAWING No. 1 SHEET 55011287-000-4 4/4 CB4.17.F1 F