IB047-SMPFSMPF-4.0IN

THE REVISION STATUS OF ALL SHEETS OF THIS DRAWING IS THE SAME AS SHEET 1 REV A DESCRIPTION DATE 05/14/22 INITIAL RELEASE Dwg. Number IE-00273-01 IE-00273-02 IE-00273-03 IE-00273-04 IE-00273-05 Customer P/N - BY SVP Length(L) in ‘INCH’ 4 +0.16/-0 6 +0.24/-0 8 +0.32/-0 10 +0.40/-0 12 +0.48/-0 Smart P/N IB047SMPFSMPF4.0IN IB047SMPFSMPF6.0IN IB047SMPFSMPF8.0IN IB047SMPFSMPF10.0IN IB047SMPFSMPF12.0IN 1.0 Scope This drawing documents the construction and performance of INSTABEND 047 cable assemblies manufactured by Times Microwave systems. 2.0 Cable Information 2.1 Cable to be INSTABEND 047 2.2 Jacket color to be Blue 2.3 Jacket material to be FEP 2.4 Nominal cable impedance to be 50 ohms 2.5 Cable diameter to be 0.061inch [1.55mm] (Nominal). 3.0 Connector Information: 3.1 Forward Connector: Type SMP (F) Connector (47432) Connector Body – Stainless Steel, Gold Plated Center Contact – Beryllium Copper, Gold Plated 3.2 After Connector: Type SMP (F) Connector (47432) Connector Body – Stainless Steel, Gold Plated Center Contact – Beryllium Copper, Gold Plated Unless otherwise specified, dimensions are in INCH. Tolerances are applicable when specified. These drawings and specifications contain proprietary information which is the property of Times Microwave Systems. TIMES MICROWAVE SYSTEMS Approvals Drawn www.timesmicrowave.com SVP 05/14/22 Checked Approved INSTABEND 047 CABLE ASSEMBLY Size A CAGE CODE 68999 Scale: NA Drawing No.: IE-00273-XX Rev. (A) Sheet: 1 of 2 THE REVISION STATUS OF ALL SHEETS OF THIS DRAWING IS THE SAME AS SHEET 1 REV A DESCRIPTION DATE 05/14/22 INITIAL RELEASE BY SVP 4.0 Electrical Performance Max. Insertion Loss in (dB) Max. VSWR @ 10MHz – 18000 MHz 10MHz – 12400 MHz @ 12400 – 18000 MHz IE-00273-01 0.98 1.35 1.50 IE-00273-02 1.33 1.35 1.50 IE-00273-03 1.68 1.35 1.50 IE-00273-04 2.03 1.35 1.50 IE-00273-05 2.38 1.35 1.50 5.0 Mechanical Performance 5.1 Overall Length to be specified length. 5.2 Minimum Bend radius is 0.750inch [19.05mm]. Dwg. Number 6.0 Environmental Performance 6.1 Installation Temperature Range (-65°C to +125°C) 6.2 Storage Temperature Range (-65°C to +125°C) 6.3 Operating Temperature Range (-65°C to +125°C) 7.0 NOTES 1. Unless Otherwise Specified: Tolerance will be Linear Dimension Tolerance INCH INCH ±0.4 79 **Tolerances are not accumulative. Unless otherwise specified, dimensions are in INCH. Tolerances are applicable when specified. These drawings and specifications contain proprietary information which is the property of Times Microwave Systems. TIMES MICROWAVE SYSTEMS Approvals Drawn www.timesmicrowave.com SVP 05/14/22 Checked Approved INSTABEND 047 CABLE ASSEMBLY Size A CAGE CODE 68999 Scale: NA Drawing No.: IE-00273-XX Rev. (A) Sheet: 2 of 2