L17RRD2M11400

RR-HR D-Sub connectors - Stamped and Formed Contacts DESCRI PTI ON Specifications L • Materials and Platings Shells T Insulator Boardlock 1 L 1 Screwlock Designed for high volume production, Amphenol's rear release crimp connector and contacts provide significant cost saving. - EMI / RFI shell configuration. - Removable, reusable contacts. - Automatic and manual tooling available. V 1 Under plating Simplify your cable assemblies Crimp side 5 Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance Wire size 5A RR: HR: RR: HR: A Climatic Data Operating temperature Mechanical Data Mating and unmating force No. of Cts RR HR Mate (max) RR 1 Unmate (min) HR RR HR • Commercial • Industrial • Telecom • Any industry standard I / O connections RR-HR / E11 Contacts-Brass APPLI CATI ONS CHARACTERI STI CS REAR RELEASE CRIMP CONNECTORS E±0.05 (.002) POSITION #1 10.72 (.422) 5.8 (.228) F±0.13 (.005) 10.9 (.429) numbered cavities 5.8 (.228) SOCKET 11.2 (.441) 11 (.433) ø3.05 (.120) X PLUG 12.55±0.38 (.494±.015) C±0.13 (.005) D±0.13 (.005) 10° 6.0 (.232) 7.9±0.13 (.311±.005) B±0.13 (.005) 2.84 (.112) 8.38±0.13 (.33±.005) A±0.38 (.015) DIMENSIONS mm (inch) A B C D E F X 9 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 11.09 (.44) 19.28 (.76) 2.77 15 39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.97) 19.39 (.76) 27.51 (1.08) 2.77 25 53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31) 41.30 (1.63) 2.77 37 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96) 57.71 (2.27) 2.77 50 67 (2.64) 61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 44.32 (1.75) 55.3 (2.18) 2.77 POSITION #1 10° ø3.05 (.120) F±0.38 (.015) 2 10.9 (.429) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) X PLUG 11 (.433) 10.9±0.13 (.429±.005) E±0.13 (.005) 5.8 (.228) 2.84 (.112) B±0.13 (.005) C±0.13 (.005) D±0.13 (.005) 2.84 11.2±0.13 (.441±.005) A±0.38 (.015) 15.37±0.38 (.605±.015) Nb OF CONTACTS 6.0 (.236) OVERALL DIMENSIONS Standard density RR 13.56 (.534) 7.9±0.13 (.311±.005) 8.38±0.13 (.33±.005) B±0.13 (.005) C±0.13 (.005) 1.98 1.98 (.078) D±0.13 (.005) POSITION #1 10° OVERALL DIMENSIONS A±0.38 (.015) 12.55±0.38 (.494±.015) High density HR ø3.05 (.120) 2.29±0.05 (.09±0.002) E±0.13 (.005) 5.2 (.205) 10.3 (.406) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) 6.0 (.236) 11 (.433) PLUG 10.72 (.422) DIMENSIONS mm (inch) Nb OF CONTACTS A B C D E 15 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 19.28 (.76) 26 39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.97) 27.51 (1.08) 44 53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63) 62 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27) 78 67 (2.64) 61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 55.3 (2.18) POSITION #1 E±0.38 (.015) 10.3 (.406) 5.2 (.205) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) 6.0 (.236) 11 (.433) ø3.05 (.120) 2.41 (.095) PLUG RR-HR / E11 45.79±0.13 (1.80±.005) 15.37±0.38 (.605±.015) C±0.13 (.005) D±0.13 (.005) 10° 3 10.9±0.13 (.429±.005) B±0.13 (.005) 2.08 (.082)x3=6.24 (.246) 11.2±0.13 (.441±.005) A±0.38 (.015) 13.56 (.534) 5.9 (.232) Standard density: M3 or #4-40 front screwlock ø3.05 (.120) M3 or #4-40 Fixed front female screwlock VF / VFM 2.5 (.098) Standard rivet ø 3.05mm no digit High density: M3 or #4-40 2.5 (.098) Threaded rear insert H/G ø3.05 (.120) Threaded rear insert H/G Standard rivet ø3.05mm no digit 5.8 (.228) TECHNICAL DATA Panel mounting option M3 or #4-40 front screwlock 4 Fixed front female screwlock VF / VFM Standard density: 9.9 (.390") 4.7 (.185") 9.4 (.370") A C B ø2.1 (.083") ø1.03 (.041") 1.75 (.069") TECHNICAL DATA Contacts 4.7 (.185") AWG A B C 20-24 1.8 (.071”) 1.9 (.075”) 2.5 (.098”) 24-28 1.4 (.055”) 1.5 (.059”) 1.7 (.066”) High density: 7.7 (.303") A ø2.1 (.083") 1.75 (.069") 6.15 (.242") 6.15 (.242") 7.3 (.287") 1.55 (.061”) 5 ø1.5 (.059”) 0.9 (.035") RR-HR / E11 1.55 (.061”) 1.3 (.051") ø1.55 (.061”) 1.65 (.065") ø0.76 (.030”) 0.95 (.037") TECHNICAL DATA How to order RR (standard density) Housings L ..... RR ..... ..... ..... ..... ..... RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.1mm F = float mounting configuration: 09,15,25,37,50 Contacts L 17 RR ..... ..... ..... ..... RoHS Compliant wire size: D1: 20 to 24 AWG D2: 24 to 28 AWG packaging: 100 = bulkpack unit (100 cts) 400 = reel of 400 cts 2K = reel of 2000 cts 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel) contact type: M = male F = female full gold plating: 01 = Flash Gold 02 = 0.4µ (15µ") 04 = 0.76µ (30µ") selective gold plating: 11 = Flash Gold + 2µm (78µ") Sn 12 = 0.4µ (15µ") + 2µm (78µ") Sn 14 = 0.76µ (30µ") + 2µm (78µ") Sn REEL WINDING DIRECTION Left to right feed reel:G For special request, please consult factory Right to left feed reel:K 6 HOW TO ORDER How to order HR (high density) Housings L ..... HR ..... ..... ..... ..... ..... RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.05mm configuration: 15,26,44,62,78 Contacts L 17 HR D2 ..... ..... ..... RoHS Compliant wire size: 24 to 28 AWG contact type: M = male F = female 7 full gold plating: 01 = Flash Gold 02 = 0.4µ (15µ") 04 = 0.76µ (30µ") selective gold plating: 11 = Flash Gold + 2µm (78µ") Sn 12 = 0.4µ (15µ") + 2µm (78µ") Sn 14 = 0.76µ (30µ") + 2µm (78µ") Sn REEL WINDING DIRECTION Left to right feed reel:G For special request, please consult factory Right to left feed reel:K RR-HR / E11 packaging: 5K = reel of 5000 cts (right feed reel) 5G = reel of 5000 cts (left feed reel) 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel) For standard density crimp contacts: 17RR series 17D 438 SP 17D 440 SP FA 0000 762 FA 0000 104 FA 0000 102 FE 0400 970 MC 968 MC 972 MC For high density crimp contacts: 17HR series • automatic crimp machine for reels of 2000 to 10000 contacts crimp dies: AWG 24 to 28 970 MC 973 MC Do not hesitate to contact us for further information Amphenol IT & Communication Products Block A3/A4, The 4th Industrial District of Industrial Headquarters, Dong Keng Road Gong Ming Town, Shen Zhen China Fax:+86(0)755 2754 9955 Technical Support Tel:+86(0)755 2717 7945 Info-dsub@amphenol.com.cn http://www.dsubconnector.com The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. • contact insertion and removal tool • hand crimp tool for single contacts AWG 20 to 28 • hand crimp tool for reels of 400 contacts crimp dies: AWG 20 to 24 crimp dies: AWG 24 to 28 • stripping box • automatic crimp machine for reels of 2000 to 10000 contacts crimp dies: AWG 20 to 24 crimp dies: AWG 24 to 28 E11/G HOW TO ORDER Tooling for crimp contacts 8