L777HRE15P

RR-HR D-Sub connectors - Stamped and Formed Contacts Materials and Platings Tinned steel with or without dimples on plug connector Black glass-filled thermoplastic, UL 94V-0 Brass, 3µm to 5µm (118µ" to 197µ") tin over nickel 2µm to 3µm (78µ" to 118µ") Brass, 6µm to 10µm (236µ" to 394µ") tin over nickel 2µm to 3µm (78µ" to 118µ") Shells Insulator Boardlock Screwlock Contacts-Brass Under plating Crimp side 0.2µm (8µ") gold 2µm (78µ") nickel gold flash or tin 0.5µm (20µ") gold 2µm (78µ") nickel gold flash or tin 0.76µm (30µ") gold 2µm (78µ") nickel gold flash or tin - EMI / RFI shell configuration. - Removable, reusable contacts. - Automatic and manual tooling available. Simplify your cable assemblies Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance Wire size 5A 500V AC/rms 50Hz RR: 1000V AC/rms 50Hz for 1 minute HR: 1000V AC/rms 60Hz for 1 minute RR: 5000MΩ HR: 1000MΩ 10mΩ max 20-28 AWG max insulation Ø1.27mm (.05") Climatic Data Operating temperature -55°C to +125°C Mechanical Data Mating and unmating force Unit: kg ( lb) No. of Cts RR 9 (size E) 15 (size A) 25 (size B) 37 (size C) 50 (size D) HR 15 (size E) 26 (size A) 44 (size B) 62 (size C) 78 (size D) Mate (max) RR HR 3.05 (6.74) 3.81 (8.42) 5.09 (11.24) 5.95 (13.16) 8.44 (18.66) 9.26 (20.46) 12.51 (27.65) 13.48 (29.78) 14.65 (32.38) 15.82 (34.96) Unmate (min) RR 0.36 (0.79) 0.46 (1.01) 0.81 (1.8) 1.1 (2.47) 1.6 (3.56) HR 0.52 (1.14) 1.05 (2.32) 1.37 (3.02) 1.76 (3.88) 2.02 (4.46) Designed for high volume production, Amphenol's rear release crimp connector and contacts provide significant cost saving. • Commercial • Industrial • Telecom • Any industry standard I / O connections RR-HR / E11 • Connectors according to MIL C24308 APPLI CATI ONS CHARACTERI STI CS Specifications DESCRI PTI ON REAR RELEASE CRIMP CONNECTORS E±0.05 (.002) POSITION #1 10.72 (.422) 5.8 (.228) F±0.13 (.005) 10.9 (.429) numbered cavities 5.8 (.228) SOCKET 11.2 (.441) 11 (.433) ø3.05 (.120) X PLUG 12.55±0.38 (.494±.015) C±0.13 (.005) D±0.13 (.005) 10° 6.0 (.232) 7.9±0.13 (.311±.005) B±0.13 (.005) 2.84 (.112) 8.38±0.13 (.33±.005) A±0.38 (.015) DIMENSIONS mm (inch) A B C D E F X 9 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 11.09 (.44) 19.28 (.76) 2.77 15 39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.97) 19.39 (.76) 27.51 (1.08) 2.77 25 53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31) 41.30 (1.63) 2.77 37 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96) 57.71 (2.27) 2.77 50 67 (2.64) 61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 44.32 (1.75) 55.3 (2.18) 2.77 POSITION #1 10° ø3.05 (.120) F±0.38 (.015) 2 10.9 (.429) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) X PLUG 11 (.433) 10.9±0.13 (.429±.005) E±0.13 (.005) 5.8 (.228) 2.84 (.112) B±0.13 (.005) C±0.13 (.005) D±0.13 (.005) 2.84 11.2±0.13 (.441±.005) A±0.38 (.015) 15.37±0.38 (.605±.015) Nb OF CONTACTS 6.0 (.236) OVERALL DIMENSIONS Standard density RR 13.56 (.534) 7.9±0.13 (.311±.005) 8.38±0.13 (.33±.005) B±0.13 (.005) C±0.13 (.005) 1.98 1.98 (.078) D±0.13 (.005) POSITION #1 10° OVERALL DIMENSIONS A±0.38 (.015) 12.55±0.38 (.494±.015) High density HR ø3.05 (.120) 2.29±0.05 (.09±0.002) E±0.13 (.005) 5.2 (.205) 10.3 (.406) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) 6.0 (.236) 11 (.433) PLUG 10.72 (.422) DIMENSIONS mm (inch) Nb OF CONTACTS A B C D E 15 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 19.28 (.76) 26 39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.97) 27.51 (1.08) 44 53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63) 62 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27) 78 67 (2.64) 61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 55.3 (2.18) POSITION #1 E±0.38 (.015) 10.3 (.406) 5.2 (.205) numbered cavities 11.2 (.441) SOCKET 5.8 (.228) 6.0 (.236) 11 (.433) ø3.05 (.120) 2.41 (.095) PLUG RR-HR / E11 45.79±0.13 (1.80±.005) 15.37±0.38 (.605±.015) C±0.13 (.005) D±0.13 (.005) 10° 3 10.9±0.13 (.429±.005) B±0.13 (.005) 2.08 (.082)x3=6.24 (.246) 11.2±0.13 (.441±.005) A±0.38 (.015) 13.56 (.534) 5.9 (.232) Standard density: M3 or #4-40 front screwlock ø3.05 (.120) M3 or #4-40 2.5 (.098) Fixed front female screwlock VF / VFM Standard rivet ø 3.05mm no digit High density: M3 or #4-40 2.5 (.098) Threaded rear insert H/G ø3.05 (.120) Threaded rear insert H/G Standard rivet ø3.05mm no digit 5.8 (.228) TECHNICAL DATA Panel mounting option M3 or #4-40 front screwlock 4 Fixed front female screwlock VF / VFM Standard density: 9.9 (.390") 4.7 (.185") 9.4 (.370") A C B ø2.1 (.083") ø1.03 (.041") 1.75 (.069") TECHNICAL DATA Contacts 4.7 (.185") AWG A B C 20-24 1.8 (.071”) 1.9 (.075”) 2.5 (.098”) 24-28 1.4 (.055”) 1.5 (.059”) 1.7 (.066”) High density: 7.7 (.303") A ø2.1 (.083") 1.75 (.069") 6.15 (.242") 6.15 (.242") 7.3 (.287") 1.55 (.061”) 5 ø1.5 (.059”) 0.9 (.035") RR-HR / E11 1.55 (.061”) 1.3 (.051") ø1.55 (.061”) 1.65 (.065") ø0.76 (.030”) 0.95 (.037") TECHNICAL DATA How to order RR (standard density) Housings L ..... RR ..... ..... ..... ..... ..... RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.1mm F = float mounting configuration: 09,15,25,37,50 Contacts L 17 RR ..... ..... ..... ..... RoHS Compliant wire size: D1: 20 to 24 AWG D2: 24 to 28 AWG packaging: 100 = bulkpack unit (100 cts) 400 = reel of 400 cts 2K = reel of 2000 cts 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel) contact type: M = male F = female REEL WINDING DIRECTION full gold plating: 01 = Flash Gold 02 = 0.4µ (15µ") 04 = 0.76µ (30µ") selective gold plating: 11 = Flash Gold + 2µm (78µ") Sn 12 = 0.4µ (15µ") + 2µm (78µ") Sn 14 = 0.76µ (30µ") + 2µm (78µ") Sn Left to right feed reel:G Right to left feed reel:K 6 For special request, please consult factory HOW TO ORDER How to order HR (high density) Housings ..... HR ..... ..... ..... ..... ..... L RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.05mm configuration: 15,26,44,62,78 Contacts 17 HR D2 ..... ..... ..... L RoHS Compliant wire size: 24 to 28 AWG packaging: 5K = reel of 5000 cts (right feed reel) 5G = reel of 5000 cts (left feed reel) 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel) full gold plating: 01 = Flash Gold 02 = 0.4µ (15µ") 04 = 0.76µ (30µ") selective gold plating: 11 = Flash Gold + 2µm (78µ") Sn 12 = 0.4µ (15µ") + 2µm (78µ") Sn 14 = 0.76µ (30µ") + 2µm (78µ") Sn REEL WINDING DIRECTION Left to right feed reel:G 7 For special request, please consult factory Right to left feed reel:K RR-HR / E11 contact type: M = male F = female For standard density crimp contacts: 17RR series 17D 438 SP 17D 440 SP FA 0000 762 FA 0000 104 FA 0000 102 FE 0400 970 MC 968 MC 972 MC For high density crimp contacts: 17HR series • automatic crimp machine for reels of 2000 to 10000 contacts crimp dies: AWG 24 to 28 970 MC 973 MC Do not hesitate to contact us for further information Amphenol IT & Communication Products Block A3/A4, The 4th Industrial District of Industrial Headquarters, Dong Keng Road Gong Ming Town, Shen Zhen China Fax:+86(0)755 2754 9955 Technical Support Tel:+86(0)755 2717 7945 Info-dsub@amphenol.com.cn http://www.dsubconnector.com The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. • contact insertion and removal tool • hand crimp tool for single contacts AWG 20 to 28 • hand crimp tool for reels of 400 contacts crimp dies: AWG 20 to 24 crimp dies: AWG 24 to 28 • stripping box • automatic crimp machine for reels of 2000 to 10000 contacts crimp dies: AWG 20 to 24 crimp dies: AWG 24 to 28 E11/G HOW TO ORDER Tooling for crimp contacts 8