LMD-6007-P

Amphenol® LMD and LMS Modular Connectors for Rack & Panel or Cable Attachment LRM (Line Replaceable Modules) Low Mating Force MIL-DTL-55302 HSB3 HDB3 Hi Speed Other Rectangular Interconnects LMD/LMS Rectangular Interconnects Rack & Panel Brush Ruggedized Docking Conn./ Hybrids - Signal/Power/ Standard Accessories/Install. Coax/Fiber Optics Brush High Density Ruggedized VME64x / VITA 60, 66 Options/ Hybrids - Fiber Optics/ Staggered/ Accessories Hi Speed/RF/Power GEN-X Introduction/ Pkg. Solutions/ Brush Contact INTRODUCTION: FEATURES, BENEFITS, PERFORMANCE 100 LMD Modular Connectors The LMD Connector Series was designed by Amphenol Pyle-National to provide flexibility in the assembly of wire harnesses that are used in instrumentation and avionic control environments. The modular design of the LMD provides rack and panel or cable to cable attachment. Design Features of LMD Connectors • An LMD Connector is comprised of a housing, modules and contacts - each ordered separately, requiring assembly • Lightweight housings are offered in two materials • standard black thermoplastic • high performance composite material for EMI shielding • white thermoplastic nylon material with increased solvent resistance • Four standard modules are available with the following contact arrangements: 1 #8, 4 #16, 9 #20, 16 #22 • Modules are available in sealed and unsealed versions • Linear module design may be used for rack and panel or cable to cable applications • Bussing modules available to allow for a plurality of circuit network configurations without extra hardware • Diode modules provide a current protection system for avionic instrumentation packages and eliminate the need for dedicated PC boards and other hardware • Miniature relay modules can be added which eliminate the need for printed circuit boards and hardware LMD Receptacle and Plug LMD Benefits • • • • • • Reduces assembly and production costs Eliminates costly PC board and associated hardware Reduces inventory levels and associated costs Allows for a variety of circuit configurations Permits ease of circuit upgrading Facilitates equipment maintenance LMD Performance Characteristics Temperature Rating –55° C to +140° C (-67 ° F to + 284° F) Insulation Resistance (min.) 5000 megohms initial: 1000 megohms after 96 hours humidity Durability 250 cycles (mating and unmating) Vibration Physical Shock Maximum discontinuity of one microsecond when subjected to sinusoidal vibration of 10 to 2000 Hz at 15 gravity units Maximum discontinuity of one microsecond when subjected to 1/2 -sine-wave transient shock of 50 gravity units with pulse duration of 11 milliseconds Module Insertion & Removal Force 5 lbs. maximum Module Retention 70 lbs. minimum LMS Modular Connectors Supplementing the LMD connector family, Amphenol/Pyle National offers the LMS in-line splice connector; a low cost interconnects that incorporates the LMD modules and contacts. • Standard LMS splice connector - 3-piece assembly with module removal tool access • Tool-less splice connector - 3-piece assembly with a push-button module release for easy module removal • Two-piece bracket available for panel mounting • Used in wire harness, instrument and equipment terminations and test points LMS Tool-less Splice Connector Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com LMD Modular Connectors FEATURES, OPTIONS & CONTACT DATA Introduction/ Pkg. Solutions/ Brush Contact LMD Receptacle LMD Plug Optional Keying Post (Six position keying capability) Contact Resistance Contact Wire Size Size Test Current Max. (amperes) Millivolts Dielectric Withstanding Voltage AC (RMS) Max. Recommended Working Voltage AC (RMS) 22 28 5.0 1.5 73 54 1800 600 20 20 24 7.5 3.0 55 45 1800 600 16 16 20 13.0 7.5 49 46 2300 900 8* 12 14 23 17 42 40 2300 900 8 8 10 46 33 26 28 2300 900 Contact Wire Size Size Contact Crimp Tensile Strength Lbs. Min. Max. Wire Insulation 3 5 8 12 8 12 20 20 30 50 8* 14 12 70 110 .255 8 10 8 150 220 .255 22 20 .083 .103 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com Other Rectangular Interconnects * with #12 wire well LMD/LMS Rectangular Interconnects 16 .054 Rack & Panel Brush Ruggedized 28 26 24 22 24 22 20 20 18 16 Low Mating Force MIL-DTL-55302 22 High Density Contact Data Standard Hybrids - Signal/Power/ Docking Conn./ Brush Coax/Fiber Optics Accessories/Install. LMD’s module options provide a mix of both active and passive devices within one connector. The features and options of this series describe the design flexibility in this connector series: • LMD Standard components are molded of a U/L rated 94VO flame retardant, light-weight thermoplastic material. Alternate white nylon material (provides resistance to industrial oils and solvents) is available; consult Amphenol Aerospace for availability. • The linear LMD connector may be used for rack and panel or cable-to-cable applications. • Plug and receptacle housings may be front or rear panel mounted. • Optional keying post provides six position keying capability. • The optional center jackscrew provides ease of mating and unmating and insures high reliability under vibration. • Cable strain reliefs are available for internal attachment. (See page 107). • Variety of module types. Sealed and unsealed modules accept rear release #8, #16, #20 and #22 gauge contacts. Bussing, diode and relay modules available. PC tail contacts are also available; consult Amphenol Aerospace. • A variety of contacts accept #8 through #28 AWG wire. Commercially available automated crimp terminating equipment may be used. • Wired or unwired modules are rear inserted and held by two retention tines. With the aid of a front release tool, the modules are easily removed from the rear. (See pg. 107). • Pin or socket modules may be intermixed in plug or receptacle housings. HSB3 Hi Speed LMD Features and Options Module Sealed or unsealed, accept rear release #8, #16, #20 and #22 gauge contacts (See pages 103-105 for the variety of module types available) HDB3 Variety of Contacts available. (accept #8 through #28 AWG wire) Ruggedized VME 64x/ VITA 60, 66 Pin or Socket Modules (may be intermixed in plug or receptacle housings LRM (Line Replaceable Modules) Strain Reliefs Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X Hi Speed/RF/Power Accessories Optional Center Jackscrew 101