LUSB-3593-00

LUSB Connector Series Type A, Right Angle with Positive Latch Product Specification S6044C Rev 0.5 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. LOCKING TAB PUSH IN THIS DIRECTION TO UNLOCK Related Products MUSB MUSB-B151-34 SERIES MINI-B, RIGHT ANGLE SHOWN P/N LUSB-A111-00 SHOWN. USB A TYPE RECEPTACLE WITH POSITIVE LOCKING TAB. RIGHT ANGLE. Overview This Product Specification defines the general use and performance parameters for Amphenol’s LUSB, USB with positive locking series of connectors. Availability: USB 2.0 series type A, right angle PCB mount. USB 3.0 series type A, right angle PCB mount available now. USB 2.0 series type A, vertical planned for future release. Usage MUSB-C111-30 SERIES A, RIGHT ANGLE, STACKED SHOWN MRJ MRJ-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 Revision date: July 15,2015 The connector system is designed to provide a standard USB interface with a unique latching mechanism to prevent the unintentional interruption of data transmission. The latch must be intentionally raised in order to remove the plug. An accidental pull on the cable up to 50N (11.2lbs) force will not separate the connectors. Applications Intended for use in applications such as:  Medical equipment  ATM machines  Lottery Terminals  GPS  Miltary Vehicles, radios, PDA  Hand Held Data Loggers  Mobile Entertainment Systems Page 1 of 3 S6044C Rev 0.5 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products MUSB Connector Electrical Characteristics Maximum current: 1.5A per contact for USB 2.0 1.8A for positions 1 &4 with 0.25A on remaining positions on the USB 3.0 Contact resistance: 30 mΩ max Insulation Resistance: 1000 MΩ min DWV: 500 VAC @ sea level Connector Mechanical Characteristics Standard USB interface Thermal Shock: 10 cycles -65°C to +105° C Physical Shock: Per EIA-364-27 Condition H (11ms 30G) Humidity: Per EIA-364-31B, Method III, Condition B Vibration: Per EIA-364-28D per Condition V, Test A Durability: 1500 mating cycles Insertion Force: 35 N (7.87 lbs) max Withdrawal Force: 8 N (1.8 lbs) min with latch disengaged Material Requirements LUSB connectors are RoHS compliant. Unless otherwise specified, the materials for each component shall be: MUSB-B151-34 SERIES MINI-B, RIGHT ANGLE SHOWN MUSB-C111-30 SERIES A, RIGHT ANGLE, STACKED SHOWN MRJ Connector  Contacts o Base material: Copper alloy o Plating: 30 µ” (0.76 µm) min Gold over Nickel  Housing: High temperature thermoplastic, UL94V-0 rated, Black  Shell o Base material: Copper alloy o Plating: Nickel  Locking Tab: Stainless Steel Temperature rise: Meets the requirement of 30° C ΔT Operating temperature -40° to +85° C Available Documents Drawing Numbers: P-LUSB-A111-00 P-LUSB-3193-00 P-LUSB-A511-00 LUSB Series A Right Angle Receptacle with Positive Locking Tab LUSB Series USB 3.0 Type A Receptacle with Positive Locking Latch LUSB Series A Vertical Receptacle with Locking Latch QTR: QTR9300426 Qualification Test Report MRJ-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Page 2 of 3 Copyright © Amphenol Corporation 2015 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. S6044C Rev 0.5 Product Numbering System LUSB LUSB - A 1 1 1 - 00 X Lockable USB Series Receptacle Type A – Standard A Series per USB 2.0 3 – Standard A Series per USB 3.0 Termination Style1 1 – Right angle 5 – Vertical Number of Contacts 1 – 4 Contacts. Use with USB 2.0 A Series 9 – 9 Contacts. Use with USB 3.0 A Series Insulator Housing Colour 1 – Black, Standard for USB 2.0 A Series 3 – Blue, Standard for USB 3.0 A Series Other Options 00 – Standard Unique Special Code1 No Digit – Standard part defined by previous 10 digits 1 to 9 - Unique special feature Notes: 1) Consult with Amphenol for additional connectors such as vertical or upright (flag) termination styles, contact tail lengths, latch styles or other special requirements Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Page 3 of 3 Copyright © Amphenol Corporation 2015 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.