M22520/5-01

Amphenol® Tools TWINHEX Crimp Tool System Hand Crimp Tool The Amphenol TWINHEX crimp tool system is used in Industrial/ Military Standard applications. It consists of a tool frame and a selection of die sets for use in assembling Amphenol RF connectors. Pneumatic Crimp Tool The Amphenol pneumatic crimp tool 227-60 is designed for use in high volume RF connector/cable assembly applications. Bench mountable on a swivel base, this high speed crimp tool runs on a standard 85/100 psi airline and is actuated by a foot switch for hands-free operation. Die Sets for Crimp Tool 227-944 & Pneumatic Crimp Tool 227-60 Amphenol Die Set Number Military Die Set Number Hex Size Inches (mm) Cavity A Cavity B (Outer) (Inner) — .255(6.5) .049(1.2) 227-980-2 ▲ — .178(4.5) .049(1.2) 227-980-3 ▲ — .324(8.2) .052(1.3) — .178(4.5) .052(1.3) 227-980-1 227-980-7 227-1221-3 ▲ M22520/5-03 .128(3.2) .105(2.7) 227-1221-9 ▲ M22520/5-09 .178(4.5) .068(1.7) 227-1221-11 ▲ M22520/5-11 .213(5.4) .068(1.7) 227-1221-13 ▲ M22520/5-13 .255(6.5) .068(1.7) 227-1221-15 M22520/5-15 .263(6.7) .068(1.7) 227-1221-23 ▲ M22520/5-23 .384(9.8) 227-1221-25 ▲ 227-1221-29 227-1221-32 ▲ — M22520/5-29 — — .429(10.9) .100(2.5) .324(8.2) .100(2.5) .324(8.2) .068(1.7) 227-1221-37 M22520/5-37 .314(8.0) .151(3.8) 227-1221-57 ▲ M22520/5-57 .213(5.4) .100(2.5) 227-1221-59 M22520/5-59 .255(6.5) .100(2.5) 227-1221-61 — .429(10.9) .116(2.9) 227-1409 — .213(5.4) .052(1.3)sq B/C= .075(1.9) .049(1.2) 227-1414 — .429(10.9) 227-1448 — .160(4.1) Order Information TWINHEX tool frame 227-944 (M22520/5-01) and pneumatic crimp tool 227-60 are sold without dies. To order the die set required for your application, please refer to the Connector Assembly Instruction for the connector part number. The recommended die set number is listed in the column headed “Die Set for Tool 227944” (& for 227-60). Amphenol Number Military Number 227-944 ▲ M22520/5-01 Hand Tool Frame for use with Twinhex 227-1221-XX and 227-980-X Die Sets (Die Sets sold separately) 227-60 ▲ — Pneumatic Crimp Tool with Swivel Base, Foot Switch and Hose (Connects tool to foot switch) (Die Sets for 227-60 are same as those used in Hand Tool Frame 227-944 and are sold separately) Description ▲ distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 162