M24308/2-528

Amphenol D-Sub And Micro-D Accessories P age Contents Content Page D-Sub Introduction 1 Strain Relief Backshell 2 Female Screw Lock 3 Male Screw Lock 4 Dust Cover (Plug & Receptacle) 5 Gaskets 6 Plastic Hood (Straight) Entry & 45 Degree Entry) 7 Metal Hood Straight (Straight Entry) 8 Metal Hood (45 Degree & 90 Degree Entry) 9 Metal Hood With Metal Clip & Metal Hood (Heavy Duty) 10 Insertion Removal Tool 11 Micro - D Standard EMI Backshell Circular Entry 12-13 Strain Relief EMI Backshell Circular Entry 14 EMI Backshell With Shield Sock 15 RFI/EMI Ellipitical Banding Backshell 16-17 Hardware Details 18 Ordering Information 19 D sub Miniature (D-SUB) Accessories WIDE RANGE OF ACCESSORIES FOR SECURE CONNECTION Amphenol’s D-Submimiature (D-Sub) connectors are part of industry standard and are one of the most popular Input/Output interconnects, addressing a wide variety of applications including telecommunications, industrial and medical. Prevents accidental mismating Hoods available in 9 to 50 positions for different connector pin configurations Metal hoods available in straight and angled terminations for EMI/RFI shielding Dust caps available in plastic versions Locking screws comes with UNC 4-40 and M3 thread options TARGET MARKETS FEATURES BENEFITS Hoods available in plastic, metalized and metallic form with locking screws Supports cable connection and prevents risks of pulling up and accidental mismating Hoods available in 9 to 50 positions Suitable for different connector pin configurations including high density series Metal hoods available in straight and angled terminations Suitable for EMI/RFI shielding Hoods available with cable clamps and jackscrews Assures secure connection with required strain relief Hoods available in different orientations and locking options Supports various customization need Range includes different locking devices like screw locks and lever locks Ensures secure and reliable connection Screws available in both UNC 4-40 and M3 thread options Ensures connector intermateability Metal and plastic dust caps Safeguards connector from dust and dirt when kept in unmated condition 1 D Sub Strain Relief Backshell D–SUB STRAIN RELIEF BACKSHELL (09 TO 50 PIN) 10º DIMENSION TABLE : Technical Data : 1. Materials : a) Shell & Clamp b) Hardware 2. Finish a) Shell & Clamp : Mild Steel : Stainless Steel : F - Cadmium Yellow Passivation : N- Electroless Nickel Finish b) Hardware : F - Cadmium Yellow Passivation : N - SS Passivation 3. Salt Spray Test : 48 Hours 4. Recommended Torque : 0.35-0.45 N-m (3 -4Inch Pound) 2 2º D Sub Female Screw Lock Assembly Dimension Table : Ordering Information: M2000 / 26 -1 Sr. No. F MIL Part No. 0.38 Series No. 1. M2000/26-1F 7.92 Male Lock Screw 2. M2000/26-2F 15.88 Dash No. Finish : Finish F- Cadmium Yellow Passivation Z- Zinc Yellow Passivation TI - Tin Plating No. Suffix - Nickel Plating P- Passivated SS Notes: 1. All Dimensions in MM 2. When A Connector Using The Alternate Method Of Securing The Shell Is Front Mounted, One Flat Washer Shall Be Used As A Spacer Between The Mounted Surface & The Connector Technical Data : 1. Corrosive Atmosphere (Salt Spray) : 48 Hrs. 5% Salt Solution At 35º ± 2ºC And 95% To 98% Relative Humidity 2. Material & Finish : Cold Rolled Steel With Cadmium Yellow Passivation 3 D Sub Male Screw Lock Assembly MALE SCREW LOCK ASSEMBLY (09 TO 50 PIN) Ordering Information: Dimension Table : M2000 / 25 - 10 Sr. No. F MIL Part No. Shell Size ‘A’ ± 0.38 ‘B’ ± 0.25 Series No. 1. M2000/25-9F 1 To 4 14.10 7.14 Male Lock Screw 2. M2000/25-10F 5 16.66 7.14 Dash No. 9 - 1 To 4 Shell Size 10 - 5 Shell Size Finish : F- Cadmium Yellow Passivation Z- Zinc Yellow Passivation TI - Tin Plating No. Suffix - Nickel Plating P- Passivated SS Finish Notes : 1. All Dimensions In MM 2. Screw Shall Be Captive In The Clip After Assembly By The End User And Corrosion Resistant Steel Screw Shall Be Used With Corrosion Resistant Steel Clip & Cold Rolled Screws Shall Be Used With Sheet Steel Clip 4 D Sub Dust Cover PLASTIC DUSTCAP FOR RECEPTACLE CONNECTOR 10º Dimension Table (Receptacle) D-Sub Plastic Dust Cap Receptacle PLASTIC DUSTCAP FOR PLUG CONNECTOR Dimension Table (Plug) 10º 5 G askets For D-Sub Connectors THESE GASKETS ARE SUITABLE FOR MIL–DTL–24308 CONNECTORS 10º DIMENSION TABLE : Ordering Information: M2000 / 1 - SG A Series No. Shell Size Sealing Gasket Shielding Range A: B: 80dB 70dB Technical Data Material Temperature Hardness For A Type For B Type : Fluorosilicone : - 55°C To 160ºC : 65±10 : 75±7 Note : For Availability Of This Product Please Contact Factory 6 D Sub Plastic Hood (Straight) Ordering Information: M2000 / 1 - PH Series No. Shell Size (1, 2, 3,4, 5) Plastic Hood Notes: 1. Material Plastic Hood : ABS Unfilled UL 94 HB Colour : Grey Screw (4-40) : Steel, Nickel Plated 2. Cable Strain Relief Cable Clamp With Self Tapping Screws 3. Temperature Range : -550 + 850C Dimension Table: D-Sub Plastic Hood (45 Degree) Hoods available in Plastic, Metalized and Metallic form Cable strain relief : Steel fibre reinforced polycarbonate UL94V-0 Color : Black Temperature range : -400 + 1200 C Dimension Table: Part No. M2000/1-PHA M2000/2-PHA M2000/3-PHA M2000/4-PHA No. of Pins 09 15 25 37 A B 31.0 39.5 53.0 69.5 36.2 40.2 40.2 40.2 Cable Diameter Locking screws : UNC 4-40 thread 4 to 13 mm 7 D Sub Straight Metal Hood (Zinc) Ordering Information: Dimension Table: Technical Data: 1. Material & Finish: a) Hood Body : Zinc Die Casted With Nickel Plated b) Hardware : Steel With Nickel Plated (UNC 4-40) b) Cable Clamp : Plastic (Black Color) D-Sub Straight Metal Hood (Aluminium) Straight Metal Hood (Aluminium) Finish: F - Cadmium Yellow Passivation OMIT For Electroless Nickel Technical Data: 1. Material a) Hood Body b) Hardware : Aluminium Alloy : Steel 2. Finish a) Hood Body : F- Cadmium Yellow Passivation OMIT For Electroless Nickel Finish Dimension Table: b) Hardware : F- Cadmium Yellow Passivation OMIT For Electroless Nickel Finish 3. Saltspray Test : 48 HOURS H 8 D sub 45 Degree Metal Hood Size: 15 to 50 Size: 09 Ordering Information: Dimension Table: Part No. M2000/1-MHA M2000/2-MHA M2000/3-MHA M2000/4-MHA M2000/5-MHA Shell Std. Size No. Of 1 2 3 4 5 HDD PINS A 15 26 44 62 78 31.00 39.50 53.20 69.70 67.20 09 15 25 37 50 B Cable Diameter 36.20 40.20 4 to 13 mm 40.20 40.20 43.70 Technical Data: 1. Material & Finish: a) Hood Body : Zinc Die Casted With Nickel Plated b) Hardware : Steel With Nickel Plated b) Cable Clamp : Plastic (Black Color) D-Sub 90 Degree Metal Hood Ordering Information: Dimension Table: Technical Data: 1. Material & Finish: a) Hood Body : Zinc Die Casted With Nickel Plated b) Hardware : Steel With Nickel Plated b) Cable Clamp : Plastic (Black Color) 9 D Sub Straight Metal Hood With Two Metal Clamps For Cable EMI/RFI 2 covers fixing screws 4 clamp fixing screws Material: Zinc Alloy Plating: Nickel Environment : Frequencies Mz > 40dB Corrosion Resistance : 50 Hours exposure to salt spray Dimension Table: Ordering Information: M2000 / 1 - MH - MCL X Series No. Shell Size 1-09/15 PIN 2-15/26 PIN 3-25/44 PIN Metal Hood Metal Clamp D-Sub Hood (Heavy Duty) Size:09 Size:15 Size:25 Technical Data: 1. Materials: a) Hood Body & Cover : Zinc Alloy, As Casted Finish b) Hardware : Stainless Steel, Passivated b) Clamp : Brass, Tin Plated Dimension Table: Ordering Information: M2CLW / 1 - MH Series No. Shell Size 1-09/15 PIN 2-15/26 PIN 3-25/44 PIN Metal Hood 10 D sub Insertion Removal Tool Insertion Removal Tool (20 & 22D Size) D-Sub Brass Bush (Spacer) Isometric View Note: 1. Material : Brass 2. Finish : 000: Cadmium Yellow Passivation Z00 : Zinc Yellow Passivation N00 : Nickel Plated 11 Micro-D 12 13 14 15 16 17 18 19 21 22 23