M3933/25-46S

ROHS COMPLIANT PRODUCT DATA DRAWING BODIES, COUPLING NUT: LOCK RINGS, CONTACTS: C DCN 38201 DATE APPROVED 05/11 PJS .870 MAX 22.10 MAX .312 7.92 HEX MATERIAL: REVISION HISTORY DESCRIPTION REV STAINLESS STEEL PER AMS-5640, ALLOY UNS S30300, TYPE 1 .300 MAX 7.62 MAX BERYLLIUM COPPER PER ASTM B196, ALLOY No. UNS C17300, TD04 SLEEVE: BRASS PER ASTM B16, ALLOY UNS No. C36000 BELLOWS: ELECTRO-DEPOSITED GOLD OVER NICKEL INSULATORS: PTFE PER ASTM D1710, TYPE I, GRADE 1, CLASS B GASKETS: SILICONE RUBBER PER A-A-59588, CLASS 2B, GRADE 50/60 RESISTOR ELEMENTS: ALUMINA SUBSTRATE WITH TANTALUM NITRIDE RESISTOR 1/4-36 UNS-2A FINISH: BODIES, COUPLING NUT: CONTACTS, SLEEVE: TABLE 1 PASSIVATED PER AMS-2700 dB VALUE 0-6.5 dB 7-8.5 dB 9-14.5 dB 15-20 dB GOLD PER ASTM B488, TYPE II, CODE C, CLASS 1.27; OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00005" MIN. VSWR ATTENUATION ACCURACY DC-2 GHz 2-4 GHz 4-8 GHz 8-12.4 GHz 12.4-18 GHz 0.3 dB 0.4 dB 1.10:1 1.15:1 1.20:1 1.25:1 1.35:1 0.5 dB 0.6 dB PERFORMANCE: IMPEDANCE: FREQ. RANGE: VSWR: OPERATING TEMP.: AVG. POWER: PEAK POWER: ENGAGEMENT/ DISENGAGEMENT: 50 OHMS DC TO 18.0 GHz SEE TABLE 1 -55 C TO +125 C 2 WATT (POWER INPUT DERATED LINEARLY FROM 25 C TO 0.5 WATTS AT 125 C) 500 WATTS (PEAK POWER FOR A DUTY CYCLE OF 5X10-4 MAXIMUM PULSE DURATION OF 5 MICROSECONDS) 2 IN-LBS MATERIAL: FINISH: SEE NOTES SEE NOTES SURFACE AREA: N/A PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL: DECIMAL: .X .XX .XXX 1/64 .030 .010 .005 ANGULAR: X X X' 1 0' 15' INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 THIRD ANGLE PROJECTION SV Microwave, Inc. UNLESS OTHERWISE SPECIFIED 1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 2) ALL DIMENSIONS ARE AFTER PLATING. 3) BREAK CORNERS & EDGES .005 R. MAX. 4) CHAM. 1ST & LAST THREADS. 5) SURFACE ROUGHNESS 63 e MIL-STD-10. 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC WITHIN .005 T.I.R. 7) REMOVE ALL BURRS DRAWN: VMJ 03/07/03 CHECKED: APPROVED: STW 03/09/03 STW 03/09/03 2400 Centrepark West Drive, Suite 100 West Palm Beach, FL 33409 TITLE: SMA PLUG TO JACK MICRO ATTENUATOR DC TO 18 GHz SIZE CAGE CODE DWG. NO. B 95077 SCALE: 4:1 M3933/25-XX SHEET 1 OF 2 ROHS COMPLIANT PRODUCT DATA DRAWING REVISION HISTORY DESCRIPTION REV C DCN 38201 DATE APPROVED 05/11 STW "XX" NUMBER TO dB VALUE CHART MATERIAL: FINISH: SEE NOTES SEE NOTES SURFACE AREA: N/A PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL: DECIMAL: .X .XX .XXX 1/64 .030 .010 .005 ANGULAR: X X X' 1 0' 15' INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 THIRD ANGLE PROJECTION SV Microwave, Inc. UNLESS OTHERWISE SPECIFIED 1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 2) ALL DIMENSIONS ARE AFTER PLATING. 3) BREAK CORNERS & EDGES .005 R. MAX. 4) CHAM. 1ST & LAST THREADS. 5) SURFACE ROUGHNESS 63 e MIL-STD-10. 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC WITHIN T.I.R. 7) REMOVE ALL BURRS DRAWN: VMJ 03/07/03 CHECKED: APPROVED: STW 03/09/03 STW 03/09/03 2400 Centrepark West Drive, Suite 100 West Palm Beach, FL 33409 TITLE: SMA PLUG TO JACK MICRO ATTENUATOR DC TO 18 GHz SIZE CAGE CODE DWG. NO. B 95077 SCALE: 4:1 M3933/25-XX SHEET 2 OF 2