M85049/39S9N

Strain Reliefs AS85049/39 Strain Relief Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 M85049/39 S 11 W Basic Part No. Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 1,000 Hour Cadmium Olive Drab Over Electroless Nickel S = Self-Locking Use Dash for Non-Self-Locking Shell Size F A Thread E Self Locking Only G G Cable Entry H TABLE I Shell Shell Size Size Ref. A 9 B 11 C 13 D 15 E 17 F 19 G 21 H 23 J 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H E Dia Max Self-Locking Only .858 (21.8) .984 (25.0) 1.157 (29.4) 1.279 (32.5) 1.406 (35.7) 1.516 (38.5) 1.642 (41.7) 1.768 (44.9) 1.889 (48.0) F Max 1.20 (30.5) 1.20 (30.5) 1.40 (35.6) 1.45 (36.8) 1.60 (40.6) 1.70 (43.2) 1.85 (47.0) 1.95 (49.5) 2.10 (53.3) G Max 1.00 (25.4) 1.10 (27.9) 1.10 (27.9) 1.25 (31.8) 1.30 (33.0) 1.35 (34.3) 1.60 (40.6) 1.75 (44.5) 1.85 (47.0) H Max .85 (21.6) .90 (22.9) 1.10 (27.9) 1.15 (29.2) 1.30 (33.0) 1.50 (38.1) 1.60 (40.6) 1.70 (43.2) 1.80 (45.7) Cable Entry Min Max .098 (2.5) .234 (5.9) .153 (3.9) .234 (5.9) .190 (4.8) .328 (8.3) .260 (6.6) .457 (11.6) .283 (7.2) .614 (15.6) .325 (8.3) .634 (16.1) .343 (8.7) .698 (17.7) .381 (9.7) .823 (20.9) .418 (10.6) .853 (21.7) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-12