MAC800-IS

MachineryMateTM intrinsically safe vibration meter kit MAC800-IS Wilcoxon’s handheld MAC800-IS vibration meter analyzes and displays vibration signals, helping users identify machine faults before they impact operations or lead to failure. The meter comes with built-in band filters for unbalance, misalignment and looseness, and its low frequency range allows readings on machinery running at speeds as slow as 120 RPM. The meter is IECEx/ATEX and SGS certified intrinsically safe for use in Class 1 Zone 1 hazardous locations. When used with the included DataMate software, the MAC800-IS kit can become the foundation of a plantwide condition monitoring program, supporting up to ten machines. Upgrading to DataMate PRO allows monitoring of up to 1,000 machines. Other options for extended capabilities include Bluetooth headphones for auditory monitoring and a strobelight attachment for run speed analysis. • Intrinsically safe, certified for Class I, Zone 1 hazardous areas Certifications Ex ib IIC T4 Gb -20°C ≤ Ta ≤ +40°C Key features • Data trending software Class I, Div 2 • Internal data storage • Built-in ISO alarms and Bluetooth capability • Includes intrinsically safe accelerometer with magnet DataMate software DataMate is the easy to use vibration analysis software tool designed for the MAC800 series. It supports up to 10 machines (standard) or up to 1,000 (PRO version), with 10 individual points per machine. By enabling remote access to databases and readings, the software makes it simple to monitor machinery at more than one site. • BDU reading to easily identify bearing problems • 800 line FFT spectrum • Manufactured in an approved ISO 9001 facility Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99387 Rev.A.1 07/21 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 1 MachineryMateTM intrinsically safe vibration meter kit MAC800-IS SPECIFICATIONS METER Size 7.95 x 2.36 x 1 in. (20 x 6 x 2.6 cm) Frequency ranges: ISO  Low speed ISO  Acceleration 10 Hz - 1 kHz (600 - 60,000 CPM) 2 Hz - 1 kHz (120 - 60,000 CPM) 2 Hz - 10 kHz (120 - 600,000 CPM) Max frequency resolution 75 CPM at 800 lines FFT setting Displayed amplitude units Acceleration: g Bearing damage: BDU Velocity: in/sec and mm/sec Displacement: mils and mm Displayed frequency units Hz or RPM Input range ± 60 g Dynamic range, 0.01 g resolution 96 dB VA bands Auto set-up Display OLED full color, high contrast Selectable languages English (default), Spanish, Portuguese, French, Italian, German, Russian, Czech, Dutch, Chinese, Korean, Japanese Weight (excluding magnet) 9.8 oz (280 grams) Environmental: IP67 waterproof –20° to +40°C –20° to +70°C Water  Operating temperature Storage temperature Power supply 2x AA batteries, Energizer® L91 Ultimate Lithium Battery life Typically 20 hours continuous operating time, dependent upon Brightness setting SENSOR Sensor 786A-IS intrinsically safe accelerometer Sensitivity 100 mV/g Sensitivity tolerance ± 5% Acceleration range 80 g Frequency range, ± 3 dB 0.5 Hz to 14 kHz Acceleration limit 500 g Cable 6 ft. coiled cable Magnet Two-pole 55 lbf, detachable Accessories supplied: • 786A-IS intrinsically safe accelerometer • R6WP-2-J88C-06 cable assembly • MD055 two-pole magnet • DataMate software • MAC001 docking station with USB cable • MAC002 protective boot with magnets • MAC003 carrying case with insert Accessories available: • MAC005 DataMate PRO software Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99387 Rev.A.1 07/21 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 2