MAC810

MachineryMateTM vibration meter kits MAC800 series Wilcoxon’s handheld MAC800 vibration meter analyzes and displays vibration signals, helping users identify machine faults before they impact operation or lead to failure. The meter comes with built-in band filters for unbalance, misalignment and looseness, and its low Hz range allows readings on machinery running at speeds as slow as 120 RPM. When used with the included DataMate software, the MAC800 kit can become the foundation of a plantwide condition monitoring program, supporting up to ten machines. Upgrading to DataMate PRO allows monitoring of up to 1,000 machines. Other options for extended capabilities include Bluetooth headphones for auditory monitoring and a strobelight attachment for run speed analysis. Key features MachineryMate kits MAC800 MAC810 MAC820 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Accessories included MAC800 meter and Datamate software USB docking cradle Protective boot 100 mV/g sensor with magnet Carrying case Strobelight attachment (MAC004) DataMate PRO software (MAC005) Bluetooth headphones (MAC006) Headphones case (MAC007) • Data trending software • Internal data storage • Built-in ISO alarms and Bluetooth capability • Standard cable mounted accelerometer with magnet • BDU reading to easily identify bearing problems • 800 line FFT spectrum • Manufactured in an approved ISO 9001 facility Certifications Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99194 Rev.B.2 12/18 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 1 MachineryMateTM vibration meter kits MAC800 series SPECIFICATIONS METER Size 7.95 x 2.36 x 1 in. (20 x 6 x 2.6 cm) Frequency ranges: ISO  Low speed ISO   BDU 10 Hz - 1 kHz (600 - 60,000 CPM) 2 Hz - 1 kHz (120 - 60,000 CPM) 1 Hz - 10 kHz (60 - 600,000 CPM) Max frequency resolution 75 CPM at 800 lines FFT setting Displayed amplitude units Acceleration: g Bearing damage: BDU Velocity: in/sec and mm/sec Displacement: mils and mm Displayed frequency units CPM or RPM Input range ± 60 g Dynamic range, 0.01 g resolution 96 dB VA bands Auto set-up Display OLED full color, high contrast Selectable languages English (default), Spanish, Portuguese, French, Italian, German Weight (excluding magnet) 9.8 oz (280 grams) Environmental: IP67 waterproof 0° to +50°C –20° to +70°C Water  Operating temperature Storage temperature Power supply 2x AA batteries Battery life 20 hours normal use SENSOR Sensor 780FM-2-J88C integral cable accelerometer Sensitivity 100 mV/g Sensitivity tolerance ± 15% Acceleration range 80 g Frequency range, ± 3 dB 0.4 Hz to 12 kHz Acceleration limit 500 g Cable 6 ft. coiled cable Magnet Two-pole 40 lbf, detachable Accessories supplied: • 780FM-2-J88C accelerometer with integral cable • DataMate software • MAC001 docking station with USB cable • MAC002 protective boot with magnets • MAC003 carrying case with insert Accessories available: • MAC004 strobelight attachment • MAC005 DataMate PRO software • MAC006 Bluetooth headphones • MAC007 headphones carrying case Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99194 Rev.B.2 12/18 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 2