MDPFTVC6G

12 23 Max [0.905 Max] 30 Max [1.181 Max] 2 Max [0.079 Max] A 2 Max [0.079 Max] C Marking area [6.3 0.197] Marking area Ferrule (X2) F G H Nylon cord +0.512 Heat shrink (X2) Heat shrink (X2) Heat shrink (X2) Heat shrink (X2) D Nylon cord [5-0.276] +13 +0.512 [5-0.276] +0,5 127 0 +0.512 +13 [5-0.276] Nylon cord Ferrule (X2) 127-7 IN THE CONSTANT PURPOSE OF IMPROVING ITS PRODUCTS, Amphenol Socapex RESERVES THE RIGHT TO MODIFY ANY DIMENSION OR CHARACTERISTICS. FM.NPD.0037.THYEZ.PUNE rev C E Nylon cord 127-7 D 160 5 Ferrule (X2) Ferrule (X2) B Rivet 0 0.769-0.006] [ 0 19,53-0,15 0.875-2A-0.1P-0.3L-TS Thread 0 [ 0.957-0.012] Rivet After Knurling 17,06-21,06 [0.671-0.829] 0 +0.02 11 MDPF TVC 6 X [ 1.014 0 ] After Knurling +0,5 0.875-2B-0.1P-0.3L-TS Thread +0.02 [ 1.014 0 ] After Knurling +0,5 25,75 0 10 MDPF TVC 7 X F057 12,20 - 15,70 [0.480-0.618] Marking area Marking area 9 AMPHENOL 0.875-2B-0.1P-0.3L-TS Thread +0.02 Rivet 8 AMPHENOL [ 1.014 0 ] After Knurling 2 Max [0.079 Max] AMPHENOL C Rivet 23 Max [0.905 Max] 12,20 - 15,70 [0.480-0.618] 2 Max [0.079 Max] AMPHENOL 25,75 0 +0,5 B 7 MDPF TVC 7 X 23 Max [0.905 Max] 12,20 - 15,70 [0.480-0.618] 6 24,3-0,3 MDPF TVC 2 X A 5 0.875-2B-0.1P-0.3L-TS Thread 4 3 25,75 0 2 1 E Rivet Rivet End link 4,5 Max [ 0.177 Max] F 28,7 Max [ 1.13 Max] 25,12 Min [ 0.99 Min] Commercial designation: 23,5 Min [ 0.925 Min] 37 Max [ 1.457 Max] MDPF TVC X X FXXX G Blank: Standard caps. F057: Protective cap for reduced flange connectors (F058, F059, F311, F312). Finish: N: Nickel G: Olive drab cadmium ZN: Black zinc nickel Connector type: 2: Square flange receptacle 7: Jam nut receptacle 6: Plug 1 2 3 4 Cable tie Solid ring Solid ring 1 Max [0.04 Max] MDPF TV Protective caps with Nylon cord 1 Max [0.04 Max] DRAWN BY : R Reddy Note: 1. All attachments (Ferrule, Rivet, End links & Solid ring) are stainless steel passivated 5 6 7 8 9 ALL DIMENSIONS ARE IN MM SCALE : 2 UPDATED BY: R Reddy AMPHENOL SOCAPEX B.P. 29 74311 THYEZ CEDEX 10 11 H LAST APPROVED BY: M Peter ORIGINAL DRAWING DATE : 30/12/21 REV : B CONFIGURATION DATA ARE AVAILABLE IN PDM PAGE : 1/1 191-PLC-1107-00 12