MN34PW02M030

M(meter) A1 - - 15 OCT 15 TECHNICAL DATA SHEET RELEASE JLAG - - 31.08MM AMPHENOL WWW.SINECO.COM 25.40MM PIN 1 WIRING DIAGRAM GREEN/YELLOW BLACK WHTIE 1 2 3 TECHNICAL DATA: PIN 2 PIN 3 1) MATERIALS: FACE VIEW COUPLING NUT: MACHINED ALUMINUM, ANODIZED INSULATION INSERT: THERMOPLASTIC, UL 94/V-0 CONTACT: GOLD FLASH PLATING OVER COPPER ALLOY CABLE RATING: UL LISTED TYPE 1015, CSA CERTIFIED TYPE TEW, FT1 FLAME RATING, 600V, 105°C CONDUCTOR INSULATION: PVC NUMBER OF CONDUCTORS: (3) 16AWG 2) ELECTRICAL DATA: CURRENT (MAX): 13A VOLTAGE (MAX): 600V AC/DC INSULATION RESISTANCE (MIN): 5000M OHMS DIELECTRIC TEST VOLTAGE: 2200V Risk of Electrical Shock Do Not Disconnect Under Load. Risque de chocs electriques Ne pas debrancher sous tension. TOLERANCE 0-2.99 M = +100.0/-25.0mm 3) MECHANICAL DATA: TEMPERATURE RANGE: -20°C TO +105°C PROTECTION: IP67 (MATED CONDITION) MATING CYCLES: >500 VIBRATION RESISTANCE PER MIL-STD-202 METHOD 204 THERMO SHOCK PER MIL-STD-202 METHOD 207 48 HOUR SALT SPRAY PER MIL-STD-202 METHOD 101 4) RoHS COMPLIANT 5) UL 2238 LISTED ASSEMBLY UL FILE NUMBERS: E224856 3-8.99 M = +150.0/-25.0mm 9-14.99 M = +300.0/-25.0mm WARNING 15-OVER M = +450.0/-25.0mm DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: NEXT ASS'Y: KMM MRF KMM RFC Amphenol DATE 12-MAY-14 12-MAY-14 12-MAY-14 ITEM Sine Systems - www.sineco.com 44724 Morley Drive Clinton Township, MI 48036 MINIBOSS M22 (7/8"), 3 PIN, FEMALE RECEPTACLE, INTERNAL THREADS, 16 AWG, UL1015, PVC WIRE THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE CHALF DWG NO: REVISION MN34PW02 C-MN34PW02 SHEET A1 1 OF 1