MP-4102-150P-C

6 5 4 3 F 2 1 F A B E nC D B nD E A E ISOMETRIC VIEW D CONTACT HOLES NOT SHOWN, FOR No OF CONTACTS REFER TO TABLE ITEM CATALOGUE P/ No OF CONTACT 1 MP-4102-13P 13 2 MP-4102-19P 19 3 MP-4102-25P 25 4 MP-4102-37P 37 5 MP-4102-54P 54 6 MP-4102-85P 85 7 MP-4102-150P 150 C Amphenol LOGO & PART No Parts No List, Dimensions in mm A B DIA C 38.0 29.4 3.23 41.0 31.8 3.23 44.5 34.9 3.73 50.8 39.7 3.73 57.0 44.5 4.30 69.8 55.5 4.30 69.8 55.5 4.30 DIA D 34.2 37.4 40.9 46.7 53.4 65.5 65.5 E 34.5 34.5 35.7 35.7 38.5 38.5 38.5 DIA F 29.0 32.2 35.3 41.4 47.8 59.0 59.0 B CUSTOMER DRAWING NOTES: 1. MATERIAL AND FINISH: DIE CAST ALUMINUM ALLOY, BLACK FINISH 2. SUPPLIED WITH GOLD PLATED CRIMP PIN CONTACTS A UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE LINEAR ANGULAR X ± X~ ± 1 X,X ± X~X' ± 30' X,XX± X~X'X"± 15' BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE 6 5 THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD.. NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER CAD FILE: MATL: FINISH: DIMENSIONS IN MILIMETRES 4 55010250000214 DRN: CKD: SEE NOTE 1 APP'D: SEE NOTE 1 THIRD ANGLE PROJECTION SCALE: 3 C 4 CHANGE FINISH TO BLACK COATING 3 2 1 CHANGE FINISH NOTES ADD STAINLESS STEEL WEAR PINS CHANGE FINISH FROM PLATING TO COATING 0 REV. DATE:21/08/2003 TITLE: P.M P.M DATE: 18/11/2003 FIRST ISSUE T.N T.N 21/08/2003 CHANGE DETAILS BY DATE PANEL RECP PLUG WITH PIN CONTACTS SIZE: A4 SEE TABLE 20/02/06 20/02/06 PART No: 09/09/2005 CHANGE DIM 56.50 TO 55.50 ADD NOTE (ZONE D3) T.N DATE: T.N T.N L.V 2 17/02/2006 16/04/2004 8478 8422 8277 8236 ---- CHG/No Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, Vic3173 DRAWING NO. 55010250-000-2 1 B SHEET 2 /2 A