MP-4164-85S-C

6 5 4 3 2 1 F F A B Amphenol LOGO & PART No nC B nD E A E ROLLER PIN FOR SHELL SIZE 32 AND 40 ISOMETRIC VIEW D D E CONTACT HOLES NOT SHOWN, FOR No OF CONTACTS REFER TO TABLE ITEM 1 2 3 4 5 6 C Parts List, Dimensions in mm ( inches) CATALOGUE P/No No OF CONTACT A B C MP-4164-13S 13 38.0 29.4 3.2 MP-4164-19S 19 41.0 31.8 3.2 MP-4164-25S 25 44.5 34.9 3.7 MP-4164-37S 37 50.8 39.7 3.7 MP-4164-54S 54 57.0 44.5 4.3 MP-4164-85S 85 69.9 55.5 4.3 DIA D 40.5 44.0 48.5 54.3 60.8 73.3 E 38.8 38.8 41.0 42.0 45.0 45.0 ROLLER PIN NO NO NO NO YES YES B CUSTOMER DRAWING NOTES: 1. MATERIAL AND FINISH: DIE CAST ALUMINUM ALLOY, BLACK FINISH 2. SUPPLIED WITH GOLD PLATED SOCKET CONTACTS A UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE LINEAR ANGULAR X ± X~ ± 1 X,X ± X~X' ± 30' X,XX± X~X'X"± 15' BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE 6 5 THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD.. NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER CAD FILE: MATL: FINISH: DIMENSIONS IN MILIMETRES 4 55010258000215 SEE NOTE 1 SEE NOTE 1 THIRD ANGLE PROJECTION C 5 4 3 2 1 CHANGE FINISH TO BLACK COATING 0 REV. DATE:28/02/2003 TITLE: CKD: P.M P.M DATE: SCALE: 3 T.N 28/02/2003 CHANGE DETAILS BY PANEL RECP WITH SOCKET CONTACT SIZE: A4 SEE TABLE 20/02/06 20/02/06 PART No: FIRST ISSUE REMOVE REFERENCE PART NUMBERS T.N DATE: 17/02/2006 SEE CHANGE NOTE 8272 DRN: APP'D: T.N T.N L.V T.N T.N CHANGE FINISH NOTES ADD ROLLER PINS ON COULPING NUT CHANGE FINISH FROM PLATING TO COATING 2 09/09/2005 16/04/2004 15/03/2004 16/09/2003 DATE 8478 8422 8277 8272 8214 ---- CHG/No Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, Vic3173 DRAWING NO. 55010258-000-2 1 B SHEET 2 /2 A