MS3348-8-10

Heavy Duty Cylindrical MIL-C-22992 QWLD 20 ® Amphenol Heavy Duty Cylindrical Connectors MIL-C-22992, QWLD wall mount receptacle thru bulkhead receptacle cable connecting plug straight plug box mount receptacle jam nut receptacle (box mount) jam nut receptacle (wall mount) Amphenol® QWLD Series heavy duty cylindrical connectors provide reliable power and control functions in hostile environments where ordinary connectors cannot survive. Design features of this connector series provide: • High Durability - water and explosion proof, resistant to abrasion, corrosion, vibration and shock • Quick, Positive Mating - double stub threads per MIL-STD-1373 for fast coupling, easily cleaned • Selection - over 300 industrial and MSapproved insert patterns available, including coaxial and thermocouple On the drilling platform in the North Sea, pump and motor generator controls run smoothly, although constantly exposed to salt spray. At Prudhoe Bay where the nights are six months long, portable lighting systems permit operation regardless of temperature plummeting to 50° below zero. The circus ferris wheel runs continuously despite the fact that it has rained for five days and all power connections are lying in six inches of mud. These situations are typical of the extreme conditions under which thousands of Amphenol QWLD connectors are operating daily. Outstanding design features that make these cylindricals a necessity for difficult applications include: • Alumilite 225* hard anodic finish for abrasion and corrosion resistance or conductive cadmium plate • Resilient inserts for moisture sealing, positive proof against shock and vibration • Sealing gaskets at every joint for waterproof assembly • Cable strain relief provided by clamp bar type accessories • Left hand accessory threads to prevent damage from disconnect torque applied in the wrong direction • Closed entry socket contact design in solder or replaceable crimp contacts * Registered trademark of Aluminum Company of America 21 MIL-C-22992, QWLD how to order MS-APPROVED CONNECTORS To illustrate the ordering procedure, MS17343R20N27PW is shown as follows: MS17343 1 PART NUMBER R 20 N 2 3 4 part QWLD INDUSTRIAL VERSIONS These heavy duty connectors are identical to MS-approved types except for the added flexibility of connector shell and contact type and finish options, plus added insert arrangements. To illustrate the ordering procedure, part number 10-194622-14S is shown as follows: PART NUMBER number 27 P W 5 6 7 1. MS Number MS17343 designates wall mount receptacle MS17344 designates straight plug MS17345 designates cable connecting plug MS17346 designates box mount receptacle MS17347 designates jam nut receptacle with rear accessory threads (wall mount) MS17348 designates jam nut receptacle (box mount) 10 – 194 6 22-14 S 1 3 4 5 2 1. Base Number Prefix - used to define connector shell finish and contact type and finish 10 - Solder type contacts, silver plated 75- Crimp type contacts, silver plated 81- Crimp type contacts, plated .0001 gold over silver 82- Crimp type contacts for MIL-C-13777 cable, silver plated 83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver 85- Crimp type contacts, plated .00005 gold over silver All above prefix numbers utilize connector shells with Alumilite* non-conductive finish 88- Solder type contacts, silver plated. Connector shell utilizes olive drab cadmium plate over nickel conductive finish. 2. Base Number - QWLD Series Heavy Duty Cylindrical Connector 3. Shell Style 0 designates wall mount receptacle 1 designates cable connecting plug 2 designates box mount receptacle 3 designates jam nut receptacle with rear accessory threads (wall mount) 4 designates thru bulkhead receptacle 6 designates straight plug 9 designates jam nut receptacle (box mount) 2. Class C designates pressurized - used where circuit integrity is protected by a pressure differential R designates environmental - see table, page 1 3. Shell Size - available in shell sizes 12 through 44. Refer to pages 53 through 59 for dimensional data. 4. Shell Finish - C for conductive or N for non-conductive 5. Insert Arrangement - current MS insert arrangements are shown in black in the QWLD insert arrangements section of this catalog. Only these arrangements are available in MSapproved connectors. 6. Contact Type - P for pin, S for socket 7. Alternate Insert Rotation - used to prevent cross-mating of connectors. Absence of a letter in this space indicates normal (0°) position of the insert. Refer to page 26 for alternate insert rotation illustrations. 4. Shell Size/Insert Arrangement - Amphenol® QWLD connectors are available in equivalent MS shell sizes with all current MS insert arrangements as well as a large selection of special arrangements for power and signal circuits. Select the required insert arrangement number from those shown in black (MS arrangements) or red (industrial arrangements). 5. Contact Type/Alternate Insert Rotation - P for pin, S for socket. When an alternate position of the connector insert is required to prevent cross-mating of connectors, a different letter (other than P or S) is used. Select from the table below the Amphenol® letter which indicates both type of contact and insert rotation desired. Refer to page 26 for alternate insert rotation illustrations. Pin Contacts Socket Contacts MS Letters Amphenol® Letters MS Letters Amphenol® Letters P PW PX PY PZ P (normal) G I K M S SW SX SY SZ S (normal) H J L N Alumilite is a registered trademark of Aluminum Co. of America 22 MIL-C-22992, QWLD insert arrangements Insert Arrangement Service Rating Total Contacts D 1 12-48 A 3 12-49 A 2 A 1 MS Approved Industrial 12-5 14-3 14-53 0 4 8 12 2 6 1 16-7 A 3 16-9 A 4 2 16-10 A 3 3 16-11 A 2 16-12 A 1 16-13 A 2 2 A 7 7 B, C, F, G = A; Bal. = Inst. 10 D 2 18-4 18-3 D 4 18-5 D 3 18-6 D 1 18-7 B 1 13 20-12 1 16 7 13 A 7 7 20-16 A 9 2 7 2 20-17 A 6 5 1 2 20-18 A 9 3 6 20-19 A 3 20-20 2 2 4 8 1 7 2 5 A 4 4 A 5 5 A 6 18-13 A 4 18-14 A 2 3 4 9 20-22 A 6 3 20-23 A 2 2 A 4 2 20-25 Inst. 13 13 20-27 A 14 14 20-29 A 17 17 20-30 Inst. 13 13 A 11 22-1 D 2 2 D 3 3 A 4 2 D 6 D 3 E 1 20-33 7 3 A 1 A 1 2 A 1 1 1 20-21 20-24 10 1 12 20-15 1 22-2 22-4 22-5 22-6 1 3 1 2 11 2 2 2 4 1 22-7 E 2 2 1 22-9 E 3 3 22-8 8 3 6 3 1 8 5 Inst. 18-12 Inst. 4 2 18-9 18-11 20-11 0 A 18-8 18-10 8 A 6 2 H = D; Bal. = A Contact Size 20-14 1 1 Total Contacts 20-9 1 E 18-1 16 3 Inst. Service Rating MS Approved Industrial 1 16-2 16-61 Insert Arrangement Contact Size 1 18-15 A 4 4 22-10 E 4 18-16 C 1 1 22-11 B 2 18-17 Inst. 7 2 22-12 D 5 18-19 A 10 10 18-20 A 5 5 E = D; A, B, C, D = A 5 18-22 D 3 3 22-14 A 19 18-24 B, C, F, G = A; Bal. = Inst. 10 10 22-15 D = E; A, B, C, E, F = A 6 5 1 18-29 A 5 5 18-30 A 5 5 18-31 A 5 5 D 1 D 3 3 D 4 4 20-2 20-3 20-4 20-6 D A, B, H, G = D; C, D, E, F = A 8 20-8 Inst. 6 22-13 22-16 19 3 6 9 1 8 22-18 A, B, F, G, H = D; C, D, E = A 8 8 A 14 14 A 9 22-21 A 3 22-22 A 4 22-24 23 1 9 22-23 4 4 A 22-20 8 2 3 A = D; Bal. = A 22-19 3 2 2 22-17 1 3 20-7 5 4 9 1 2 4 H = D; Bal. = A 8 8 C, D, E = D; A, B, F = A 6 2 4 MIL-C-22992, QWLD insert arrangements Insert Arrangement Service Rating J = D; Bal. = A 9 22-28 A 7 22-33 A, B, C, D = D; E, F, G = A 7 22-34 D 5 3 H = D; Bal. = A 8 8 MS Approved Industrial 22-27 22-36 24-2 24-3 24-5 0 4 8 7 D 7 7 7 2 A 16 16 A 2 24-10 A 7 7 24-11 A 9 3 24-12 A 5 24-16 A, B, F, G = D; C, D, E = A 7 24-17 2 8 2 28-21 A 37 28-22 D 6 32-1 A = E; Bal. =D 5 32-2 E 5 32-3 D 9 32-4 F, J, K, N = A; Bal. = D 14 32-5 D 2 32-6 A 23 32-7 A, B, h, j = Inst.; Bal. = A 35 14 32-8 2 2 1 3 37 3 3 2 3 3 1 2 2 2 4 2 12 2 16 7 28 2 2 30 14 2 32-10 A, F = E; G = B; B, E = D; C, D = A 7 2 32-12 C, D, E, F, G = A; Bal. = D 3 6 24 12 2 3 5 10 23 5 18 32-15 D 8 2 3 2 9 24-21 D 10 1 24-22 D 4 4 32-16 32-17 9 32-73 24-27 E 7 7 24-28 Inst. 24 24 28-1 A, J, E = D; Bal. = A 9 28-2 D 14 28-3 E 3 28-4 G, P, S = E; Bal. = D 12 3 7 6 A 23 2 D 4 4 3 2 16 4 18 A 46 D 22 46 D 6 3 36-4 A = D; B, C = A 3 3 36-5 A 4 4 36-6 A 6 2 36-7 A 47 7 36-8 A 47 1 46 36-9 A 31 14 14 3 4 1 2 40 D 5 2 A 48 48 28-6 D 3 3 36-11 A 48 48 28-7 D 2 2 36-12 A 48 L, M = E; B = D; Bal. = A 12 36-13 N, P, Q = E; Bal. = A 17 28-9 D 12 28-10 G = D; Bal. = A 7 28-11 A 22 18 28-12 A 26 26 28-13 A 26 26 A 35 35 28-16 A 20 20 36-52 28-17 R = B; M, N, P = D; A to L = A 15 15 28-18 M = C; G, H, J, K, L = D; A, B = H; Bal. = Inst. 12 12 28-19 H, M = B; A, B = D; Bal. = A 10 4 6 28-20 A 14 10 4 28-8 28-15 2 2 2 2 36-1 36-3 6 1 16 15 5 2 12 D 11 9 8 32-13 D 2 4 3 D 3 0 A 6 3 Contact Size D 32-9 24-20 28-5 Total Contacts 5 16 A 24-9 16 8 D Service Rating MS Approved Industrial 7 8 24-7 12 1 A, G, H = D; Bal. = A 24-6 Insert Arrangement Contact Size Total Contacts 2 10 6 6 36-10 36-14 3 4 5 5 15 D 16 M = D; Bal. = A 35 36-16 A 47 7 36-17 A 47 7 40 36-18 A 31 2 14 14 36-20 A 34 2 2 30 A 52 40-1 D 30 6 24 40-9 A 47 22 24 40-56 A 85 85 44-52 A 104 104 36-15 24 48 2 6 35 1 40 52 1 QWLD special insert arrangements Contact Size Service Rating 0 4 36-51 D 4 2 2 36-54 A 39 8 36-55 A 39 8* 36-59 A 53 3* 50 36-60 A 47 7* 40 1 36-64 Coax 4 1 7 36-65 Coax 4 12 4 8 36-71 A 53 A/D 8 8* 36-73 Coax 7 A 13 8 36-74 A 44 43 A 3 3* 36-75 A 48 48* 24-51 A 5 5 36-76 A 47 24-52 Hi Volt. 1 36-77 D 7 24-53 A 5 5 24-58 A 13 3 24-59 A 14 24-60 A 7 24-65 A 15 Service Rating Total Contacts 16-59 A 4 20-51 A 3 20-57 A 7 7* 20-58 A 10 5 20-59 A 3 20-66 A 6 5* 20-79 A/D 8 22-63 A 22-65 22-70 22-80 Coax** 0 4 8 12 16 0 4 8 12 4 3 5 3* 5 1 Insert Arrange ment Contact Size Total Contacts Insert Arrange ment Coax** 8 12 4 3 50 7 47 A 14 A 20 20 7 7 36-80 A 20 20* 36-83 Coax 7 36-85 A/D 35 12 2 7 35* 24-66 D 7 7 40-53 A 60 24-67 Inst. 19 19 40-57 E 4 24-71 A 7 7* 40-61 A 59 24-75 A 7 7* 40-62 A 60 60 24-79 A 5 5 40-63 A 61 61* 24-80 Inst. 23 40-64 Coax 36 24-84 A 19 1 40-66 Coax 4 28-51 A 12 12 40-67 A 11 28-59 A 17 7 40-68 A 21 28-66 A 16 40-70 A 61 28-72 Coax 3 40-72 A 11 1 28-74 A 16 7* 9 40-73 A 61 61 28-75 A 16 7* 9 40-74 A 6 28-79 A 16 7 9 40-75 E 5 28-82 D 6 2 40-80 A 11 28-84 A 9 9 40-81 A 62 40-82 A 62 62 40-85 A 60 60* 40-86 E 4 40-87 D 7 2 18 10 14 3 2 4 32-52 D 8 32-53 Inst./E 42 6 5 37 32-56 A 30 6* 24 32-57 Coax 8 6 32-58 Coax 4 32-60 A 23 32-62 Coax 23 32-64 Inst. 54 32-68 A 16 32-75 Coax 9 32-76 A 19 32-79 D 5 2 44-53 A 36 15 8 48-51† A 56 16 2 48-52† A 61 48-53† D 37 4 2 1 2 54 12 2 4 7 19 4 1 * Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 39-47 for application wire size. ** Coaxial cable data can be found on insert arrangement drawings, pages 39-47. For further information on coaxial contacts and cable see catalog 12-130. † Consult Sidney, NY for availability. 25 48-54† A 56 48-55† A 78 48-57† A 56 48-60† A 56 1 7 36-79 23 8 12 4 36-78 4 4 31 7 11 0 31 3 7* 16 60 4 1 3 3 55 20 13 4 1 10 21 61 1 4 10 4 1 1 10 1 62* 4 7 18 10 18 42 4 56 5 42 4 37 10 6 4 2 2 68 10 42 10 42 4 MIL-C-22992, QWLD alternate insert rotations To avoid cross-plugging problems in applications requiring the use of more than one connectror of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z which are: Degrees As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. B Position X Position Y A B A B A A B Position W W X Y Z 80 110 250 280 16-7 20-14 22-16 24-3 24-21 28-16 32-9 18-5 20-16 22-17 24-4 24-28 28-17 32-10 18-9 20-20 22-18 24-5 28-1 28-19 32-12 18-13 20-22 22-19 24-6 28-4 28-20 32-13 18-14 22-3 22-21 24-7 28-8 28-21 36-1 20-7 22-6 22-24 24-12 28-9 32-1 36-7 20-8 22-12 22-25 24-16 28-10 32-3 36-8 20-9 22-14 22-33 24-17 28-11 32-4 36-13 20-12 22-15 22-34 24-20 28-15 32-6 Position Z Views looking into front face of pin insert or rear of socket insert. Degrees Degrees Insert Arrangement W X Y Z Insert Arrangement W X Y Z 16-9 16-10 16-11 16-13 16-61 18-1 18-3 18-4 18-8 18-10 18-11 18-12 18-15 18-19 18-20 18-22 18-29 20-3 20-4 20-5 20-6 20-15 20-17 20-18 20-19 20-21 20-23 35 90 35 35 80 70 35 35 70 – – 80 – – 90 70 90 70 45 35 70 80 90 35 90 35 35 110 180 110 110 – 145 110 110 – 120 170 – 120 120 180 145 180 145 110 110 145 – 180 110 180 110 110 250 270 250 250 – 215 250 250 – 240 265 – 240 240 270 215 270 215 250 250 215 – 270 250 270 250 250 325 – 325 325 280 290 325 325 290 – – 280 – – – 290 – 290 – 325 290 280 – 325 – 325 325 20-24 20-27 20-29 22-1 22-2 22-4 22-5 22-8 22-9 22-10 22-11 22-13 22-20 22-22 22-23 22-27 22-28 22-36 24-2 24-9 24-10 24-11 24-22 24-27 28-2 28-3 28-5 35 35 80 35 70 35 35 35 70 35 35 35 35 – 35 80 80 90 80 35 80 35 45 80 35 70 35 110 110 – 110 145 110 110 110 145 110 110 110 110 110 – – – – – 110 – 110 110 – 110 145 110 250 250 – 250 215 250 250 250 215 250 250 250 250 250 250 250 – 270 – 250 – 250 250 – 250 215 250 325 325 280 325 290 325 325 325 290 325 325 325 325 – – 280 280 – 280 325 280 325 – 280 325 290 325 26 Degrees Insert Arrangement W X Y Z 28-6 28-7 28-12 28-18 28-22 32-2 32-5 32-7 32-8 32-15 32-17 32-73 36-3 36-4 36-5 36-6 36-9 36-10 36-14 36-15 36-52 40-1 40-9 40-56 44-52 70 35 90 70 70 70 35 80 80 35 45 36 70 70 – 35 80 80 90 60 72 65 65 72 72 145 110 180 145 145 145 110 125 125 110 110 – 145 145 120 110 125 125 180 125 144 130 125 144 135 215 250 270 215 215 215 250 235 235 250 250 – 215 215 240 250 235 235 270 245 216 235 225 216 225 290 325 – 290 290 290 325 280 280 280 – – 290 290 – 325 280 280 – 305 288 300 310 288 288 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A Insert Arrangement Service Rating Number of Contacts Contact Size 12-5 D 1 12 A B A A G Insert Arrangement Service Rating Number of Contacts Contact Size 16-61 A 7 16 16-9 A 2 2 12 16 16-10 A 3 12 B 14-53 Inst. 6 16 16-2 E 1 12 16-11 A 2 12 B I J B C E A 18-3 D 2 12 F A D A 16-13 A 2* 12 C B A C 18-4 D 4 16 B H 18-8 A 1 7 12 16 D A C B B 18-6 D 1 4 D F E A A G B C 18-5 D 2 1 12 16 E C E D 16-12 A 1 4 D 18-1 B, C, F, G = A; Bal. = Inst. 10 16 E A A G G 18-7 B 1 8 C B B F Insert Arrangement Service Rating Number of Contacts Contact Size D A A C B C A B F D C 14-3 A 1 8 B H F E 12-49 A 2 16 D 16-7 A 1 2 8 16 F B B 12-48 A 3 16 C Insert Arrangement Service Rating Number of Contacts Contact Size A E C D A C D B B C 18-9 Inst. 2 5 12 16 18-10 A 4 12 CONTACT LEGEND *A = Iron; B = Constantan 27 18-11 A 5 12 16 18-12 A 6 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated 100˚ D F C E A C A A B D B A E D C G F G D C B B B H A J K 100° Rotation of 18-9 Insert Arrangement Service Rating Number of Contacts Contact Size 18-13 A 1 3 8 12 A 18-14 A 1 1 4 16 18-15 A 4** 12 H C B 18-16 C 1 12 A G C A 250˚ B D C E 110˚ A A B E 18-20 A 5 16 18-22 D 3 16 B E C D D 250° Rotation of 18-1 Insert Arrangement Service Rating Number of Contacts Contact Size A B C J F D 18-19 A 10 16 B I E E 18-17 Inst. 2 5 12 16 18-24 B, C, F, G = A, Bal. = Inst. 10 16 C D 260˚ 110° Rotation of 18-20 260° Rotation of 18-20 18-30 A 5 16 18-31 A 5 16 18-29 A 5 16 A A D A A C G E B H F C B C C Insert Arrangement Service Rating Number of Contacts Contact Size 20-2 D 1 0 20-3 D 3 12 D E 20-6 D 3 16 28 A D 20-7 A, B, H, G = D; C, D, E, F = A 8 16 CONTACT LEGEND **A, C = Iron; B, D = Constantan C B B 20-4 D 4 12 B F 16 12 20-8 Inst. 2 4 8 16 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A G L B H F B E Insert Arrangement Service Rating Number of Contacts Contact Size D G E A E G K D J 20-11 Inst. 13 16 G F F B 20-12 A 1 1 4 16 I 20-16 A 2 7 12 16 A D F H A B I G C C C 20-19 A 3 8 100˚ A 20-20 A 1 3 4 12 C F B N G D E A A I C K J M B L K H N H 20-21 A 1 8 12 16 A J L B C G L K B E B T P S R J L C N D M F C 20-22 A 3 3 8 16 D F H 20-25 Inst. 13 16 F G D E H A K J 250° Rotation of 20-11 20-27 A 14 16 CONTACT LEGEND 29 N 250˚ G C M E 100° Rotation of 20-11 20-24 A 2 2 8 16 B D E B 20-18 A 3 6 12 16 D F B M 20-23 A 2 8 A E D A Insert Arrangement Service Rating Number of Contacts Contact Size A 20-15 A 7 12 B E 20-17 A 5 1 12 16 B C C 20-14 A 2 3 8 12 A A D Insert Arrangement Service Rating Number of Contacts Contact Size H B C C G I C H A D B B B E D F E A D H A D 20-9 H = D; Bal. = A 1 7 12 16 F F C N E A C M 20-29 A 17 16 16 20-30 Inst. 13 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A K A J F L B A D F D C B B B C E 20-33 A 11 16 22-1 D 2 8 22-2 D 3 8 D 22-4 A 2 2 8 12 B B C 22-7 E 1 0 B 22-8 E 2 12 22-9 E 3 12 L A E B B D C D Insert Arrangement Service Rating Number of Contacts Contact Size 22-11 B 2 16 K A J E A D A C B A C 22-6 D 2 1 8 16 C 22-5 D 2 4 12 16 A A Insert Arrangement Service Rating Number of Contacts Contact Size A E C H Insert Arrangements Service Rating Number of Contacts Contact Size A B M B H A M U T 22-10 E 4 16 A V S P R F B C D E G C B N C E D F 22-12 D 2 3 8 16 22-13 E = D; A, B, C, D = A 4 1 12 16 CONTACT LEGEND 30 22-14 A 19 16 16 22-15 D = E; A, B, C, E, F = A 5 1 12 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A F G A G H B F C G J H C F B D C 22-18 A, B, F, G, H = D; C, D, E = A 8 16 D H A F J B E E D C 22-19 A 14 16 22-20 A 9 16 A A F A G D F G A C C N G D 22-17 A = D; Bal. = A 1 8 12 16 M H E 22-16 A 3 6 12 16 L P J E D B K J E Insert Arrangement Service Rating Number of Contacts Contact Size A A B H H A H F B B J G B E C C E C B B F D C D D Insert Arrangement Service Rating Number of Contacts Contact Size 22-21 A 1 2 0 16 F 22-22 A 4 8 D A E 22-23 H = D; Bal. = A 8 12 A A G C E G Insert Arrangement Service Rating Number of Contacts Contact Size C 22-28 A 7 12 B E G F E D 22-34 D 3 2 12 16 CONTACT LEGEND 31 G B C 22-36 H = D; Bal. = A 8 12 16 C D D 22-33 A, B, C, D = D; E, F, G = A 7 16 A B H E E F 22-27 J = D; Bal. = A 1 8 8 16 A F B B C D 22-24 C, D, E = D; A, B, F = A 2 4 12 16 12 24-2 D 7 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated F A A G E B F A B C D G J M P 24-5 A 16 16 A F B D F F E E B K C B H C G B D J 24-20 D 2 9 12 16 A E B C K K D E C B E 24-21 D 1 9 8 16 24-22 D 4 8 CONTACT LEGEND 32 B F L R G F E 24-17 D 2 3 12 16 A A F G A 24-16 A, B, F, G = D; C, D, E = A 1 3 3 8 12 16 D F Insert Arrangement Service Rating Number of Contacts Contact Size 24-12 A 2 3 4 12 A B L E D 24-11 A 3 6 8 12 A J C C 24-10 A 7 8 H D B G H Insert Arrangement Service Rating Number of Contacts Contact Size 24-9 A 2 4 I G C F A C E D D E G 24-7 A 2 14 12 16 A B O H 24-6 A, G, H = D; Bal. = A 8 12 A G I C D S E A B D R 24-3 D 2 5 12 16 C N J E Insert Arrangement Service Rating Number of Contacts Contact Size B M N P C D K B H H K L L A G F E C G S D H N M T J P Q V U C D W 24-27 E 7 16 16 X Y Z 24-28 Inst. 24 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A H B K A J G J L C P H A S A M C P C G G F Insert Arrangement Service Rating Number of Contacts Contact Size N D E B B D F C D E F B E 28-1 A, J, E = D; Bal. = A 3 6 8 12 28-2 D 2 12 12 16 28-3 E 3 8 28-4 G, P, S = E; Bal. = D 2 7 12 16 H A A A E G B B A J M B K F L D C C E B C D Insert Arrangement Service Rating Number of Contacts Contact Size 28-5 D 2 1 2 4 12 16 28-6 D 3 4 J H F A K G 28-7 D 2 4 B U G E F M L N A B V W C P 28-8 L, M = E; B = D; Bal. = A 2 10 12 16 J K R S L B H C N Insert Arrangement Service Rating Number of Contacts Contact Size D 28-9 D 6 6 12 16 28-10 G = D; Bal. = A 2 2 3 4 8 12 33 V W X K J 28-11 A 4 18 12 16 CONTACT LEGEND D d Y I C C U E L D T D B T b Z M M E A S a A G X R P E F F G H 28-12 A 26 16 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated 100˚ R P A S a N b Z M B T H C U P D d Y V F J K A T L S H g R Q D K E L A G F N D P R M P k G m l H M J H C U V h f j C B B W c b a e G J Z N V U T S Y d W X R X E L K A B C D E F G J K L M F E N 100° Rotation of 28-12 Insert Arrangement Service Rating Number of Contacts Contact Size 28-13 A 26 16 28-15 A 35 16 28-16 A 20 16 A L A B M K C B E M K S C D J 28-18 M = C; G, H, J, K, L = D; A, B = H; Bal. = Inst. 12 16 C T F 28-19 H, M = B; A = D; Bal = A 4 6 12 16 h n E k j r C D E F B E B B H G Insert Arrangement Service Rating Number of Contacts Contact Size 28-22 D 3 3 4 16 m s A E D Z f 28-21 A 37 16 A F E R X e d p 28-20 A 10 4 12 16 J P W V c b H N B A A U g D G H M L M G J F G G F L a E H D E K P H C A B C N K Insert Arrangement Service Rating Number of Contacts Contact Size A J B L 28-17 R = B; M, N, P = D; A to L = A 15 16 D C J D C 32-1 A = E; Bal. = D 2 3 0 12 32-2 E 3 2 4 16 CONTACT LEGEND 34 1 0 16 12 32-3 D 2 2 4 4 12 16 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated F A K A G C B G H P K P O c F J L M N R U a g V W N f k M E Z S T 32-4 F, J, K, N = A; Bal. = D 2 12 12 16 S L T M X 32-6 A 2 3 2 16 4 8 12 16 B C N U D I V 32-5 D 2 0 A G H b B J K F Y e j H Insert Arrangement Service Rating Number of Contacts Contact Size h E R X d O D J W D I L B A C E O 32-7 A, B,h , j = Inst; Bal. = A 7 28 12 16 M T I e F W K R C G b Insert Arrangement Service Rating Number of Contacts Contact Size E C D H N K F I J M A D K C F J L 32-10 A, F = E, G = B; B, E = D; C, D = A 2 2 3 4 8 16 A 100˚ B G K M N C S D D D G H L M I P J D A C B F N R O S T E F U 32-12 C, D, E, F, G = A; Bal. = D 5 10 12 16 E Z T P B C E C K W H H O A Y J B N B R V G G 32-9 D 2 12 4 16 P X L E L 32-8 A 6 24 12 16 M E D L S X C B P a B A B A J V d A E O Z F D U c A H N Y H F G G U V X W 100° Rotation of 32-6 Insert Arrangement Service Rating Number of Contacts Contact Size 32-13 D 5 18 12 16 32-15 D 2 6 0 12 2 4 32-16 A 3 2 16 8 12 16 CONTACT LEGEND 35 16 32-17 D 4 4 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated 21 20 19 18 43 33 2 23 37 44 34 17 16 1 36 22 35 24 38 45 31 41 40 14 5 26 46 27 Insert Arrangement Service Rating Number of Contacts Contact Size I J 7 O 9 10 11 F C A F K G L H M E N B P R S T U V W 8 29 12 B E 6 28 30 13 D 4 25 39 42 32 15 A 3 32-73 A 46 16 C D 36-1 D 4 18 12 16 36-3 D 3 3 0 12 A A A B F D B E C C B C Insert Arrangement Service Rating Number of Contacts Contact Size 36-4 A = D; B, C = A 3 0 A H O P U Y Z h d j N M R W f g u r m Y T n s x L P U k p t a R V e e j f 36-7 A 7 40 12 16 D E J A P H Y b c B C K W F R L X G y T 36-8 A 1 46 12 16 CONTACT LEGEND 36 I V z Insert Arrangement Service Rating Number of Contacts Contact Size M O r w z U d a Z h u Z H d c g v y K O s w M X p v x F J b f m k t n W c b I S X a e N T S V S C E D G J I L 36-6 A 2 4 0 4 A B E G F K 36-5 A 4 0 B D C D 36-9 A 2 14 14 8 12 16 1 4 16 12 N 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A C H E J O V Q e f m g n u Insert Arrangement Service Rating Number of Contacts Contact Size J W d s m L Q S P V X d m M S K P B T d C K A c P U k Q B Q H G F N H L C D E N D M 36-13 N, P, Q = E; Bal. = A 2 15 12 16 D F H O M L P R d Z h j n e O c f j n e y T f w g k I D E J V H A c B C K W R b y M O P f p v U Y e m s x H d c b a t u a X r z Insert Arrangements Service Rating Number of COntacts Contact Size Z W Z N S R V h s x P d p m v r M L U Y g k J I 100˚ 110˚ G H K X b t w T S a u N F G J S E F Y 36-15 M = D; Bal. = A 35 16 B D C W V U Y J I K A E G Z K 36-14 D 5 5 6 8 12 16 B A C 100˚ g X L F Insert Arrangement Service Rating Number of Contacts Contact Size E W h a E D f b M G C V e m j J A R Q I S z 36-12 A 48 16 L R s x 36-11 A 48 16 B c k r w 110° Rotation of 36-10 J U b j q v y A N p z T h u N a 100° Rotation of 36-10 36-10 A 48 16 P S Z g n t M R f 110˚ G L Y e x F K Q W s E J O c k r w y U B D H b j q v z N a h p u C T Z g n G M R Y f t A F E K X e x B D P V k r w y O c b j q v H U a h C N T Z p t M S Y 100˚ G L R X A F K P W d B D L X F G T N z 100° Rotation of 36-7 110° Rotation of 36-7 100° Rotation of 36-9 36-16 A 7 40 12 16 36-17 A 7 40 12 16 36-18 A 1 2 14 14 4 8 12 16 CONTACT LEGEND 37 16 12 8 4 0 MIL-C-22992, QWLD contact arrangements front face of pin insert or rear of socket insert illustrated A C H J A B B D E F K G L M E L N M A C D H F K J N P R R X S Y T h V b a Z e d U j T W U a c f V c b j g k y M i 36-20 A 2 2 30 8 12 16 T U C G H F D E I J K P Q R E L N P AC c X M U b N O V W c d X f l m p q Z g h h d e D t u j n w f p x g AD q y z r AA s AE AR AZ BJ n AS AH AF BA AT AJ AK AL BB BK BC BL BS BD BM BT AW AV AU AM BE BN BU AX AN BF AD AR BP AY BB BH BC BY BV AE AF AS AT BD CH AU BR CJ 40-56 A 85 16 CONTACT LEGEND 38 AJ AV BF BS CA CK AL AX BU CM AM BV BL BA BM BW CE CN AB AN AZ BK CD q AA AY BJ CC CL z AK AW BT CB p y BH d n x AH BE BZ m w U c b k v T a j u BP BN BR i t AB s 40-9 A 1 22 24 8 12 16 K S Z CR Insert Arrangement Service Rating Number of Contacts Contact Size J R Y h s r AP AP H P X g f AC i F N W V W d M L M V c m v L U b k u K T a B E D J S Z i t a o k r Y T AC e j S Y b 40-1 D 6 24 12 16 C H R X a AF B F S W Z A A R V Y 36-52 A 52 16 B L P x C A K O AH AE G J N r w AB AD Insert Arrangement Service Rating Number of Contacts Contact Size h q v I Z Y p AA z F S g n u t m X f m s k W d C E H P B D BX CF CP CS 44-52 A 104 16 16 12 8 4 0 QWLD special arrangements Ever expanding requirements for more complex circuits in ground equipment and elevated altitude applications has prompted Amphenol to provide inserts not covered by the MS drawings. Pictured here and on the following pages are insert layouts which have anywhere from one contact (high tension) to the 78 contact insert in shell size 48. Many of these special inserts are also available in alternate keyway positions. Please contact Amphenol, Sidney, NY or your local Amphenol sales office for arrangements particular to your circuit application. front face of pin insert or rear of socket insert illustrated J A B C D F A C A K H E G B L D C C B B Insert Arrangement Service Rating Number of Contacts Contact Size 16-59 A 4 12 20-57 A 7* 12 for #14 or 16 wire 20-58 A 5 5 12 16 A E G A 20-59 A 3* 8 for #10 or 12 wire G C C H A D E M N E E K J C F D H 1 5 16 12 or #10 wire J B D B 20-66 A A F L F C B B H F B F 20-51 A 3* 8 D Insert Arrangement Service Rating Number of Contacts Contact Size A C A E D 20-79 H = D; Bal. = A 7* 1* 16 12 for #16 wire 22-63 A 4 8 12 16 22-65 H = D; Bal. = A 8* 12 for #14 or 16 wire A A K H E B L P F B C N E A D M C B D C Insert Arrangement Service Rating Number of Contacts Contact Size 22-70 A 8 5 12 16 22-80 A 3* 8 for #10 or 12 wire 24-51 A 5* B, E for AN #10 or 12 wire A, C, D for AN #8 wire CONTACT LEGEND *Solderless 39 16 24-52 Hi-Volt 1 12 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated H P E A D P J K K F B J N N M D F R H L A A G E B L M F B E Insert Arrangement Service Rating Number of Contacts Contact Size L R G E B Insert Arrangement Service Rating Number of Contacts Contact Size G U J A D D E C M K L 24-65 A 11 4 12 16 24-66 D 7 12 24-67 Inst. 19 12 A F A G E B B N T A G E C V C D F F P S H C P 90˚ D F R B N S 24-60 A 7* 8 for #10 or 12 wire E A F H 24-59 A 7 7 12 16 A M C D 24-58 A 3 3 7 8 12 16 K D C B 24-53 A 5* 8 J E A C C E E B 2* 5* 8 8 for #10 or 12 wire C D G H E B K R L M S N T P D F J 90˚ R A D D B F 24-71 A Q S G V P V H U N T U J C B A C C W X M K Z L Insert Arrangement Service Rating Number of Contacts Contact Size 24-75 A 5 2 8 8 for #16 wire 24-79 A 5 8 24-80 Inst. 23 16 CONTACT LEGEND *Solderless 40 24-84 A 1 18 12 12 (Coax) RG-188/U or RG-174/U 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated J H B P K N M L A R A L S T B U C N D C E E M J 28-51 A 12 12 M T L K D K E J S H S H F 28-72 – 3 4 (Coax) RG-59A/U or RG-62A/U A N M T B R P 1 L C B H J 28-66 A 2 14 8 12 L C J C B R P F T A N B R P A K K 28-59 A 7 10 12 16 A N M T L H F D A D B F Insert Arrangement Service Rating Number of Contacts Contact Size C S M E R P N 2 3 C D K E J D 4 S 5 E H F F 6 Insert Arrangement Service Rating Number of Contacts Contact Size 28-74 A 9* 4* 3* 16 8 8 for #10 wire (S, T, R) 9* 16 28-75 A 7* 8for #10 wire 90˚ H 28-79 A 7 9 8 16 X D F E F H D b j k q r f n B v g a u e w A E J V d V D I O Z E D C t U c U H N Y T d m i h S c p s A E Y W B C T R a Z J C H I M P L K A B G F N M A 28-82 D 2 4 8 12 P W R B F K C G b X S L G 90° CW Rotation of 32-15 Insert Arrangement Service Rating Number of Contacts Contact Size 28-84 A 9 8 32-52 D 6 2 12 0 32-53 t, u = E; Bal. = Inst. 5 37 12 16 CONTACT LEGEND *Solderless 41 16 32-56 A 24 6 16 12 for #10 wire 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated R A H B C D D E F Z a E B H 32-57 ** 6 2 12 0 (Coax) RG-71/U D G b c g s AB P d t AE AF 1 AC 1 D F G H K L M 7 6 6 9 7 10 11 12 2 J N 13 P R Q 14 17 4 32-75 8, 9 = D 12 4 16 4 (Coax) RG-58C/U b a A c X W E D C j f p g i U T B n q S B 36-51 D 2 2 0 4 P 42 W H V N j t F n q H f p g T J K h S L R M E d i U J D m s r 36-54 A 8 31 8 16 CONTACT LEGEND **Consult Sidney, NY for service rating of power contacts. F L R C k K h B c X E d t r A Y D m s k b Z C Y 19 18 a B Z V 16 32-76 A 19 12 2 7 12 8 (Coax) RG-180B/U A 15 3 5 32-68 A 32-79 D 4 1 4 8 3 5 8 A C 2 4 9 E AG 32-64 Inst. 54 16 D Insert Arrangement Service Rating Number of Contacts Contact Size 32-62 ** 2 1 2 16 2 4 8 12 16 8 (Coax)RG-124/U f r v y AA AD Insert Arrangement Service Rating Number of Contacts Contact Size X B C k q u x z V W 15 8 16 8 (Coax) RG-124/U 8 W a e j p w U 32-60 A R V Z h A J U Y n m S L M O T X E H L N S N R B A K 32-58 – 4 4 (Coax) RG-161U or RG-179/U M T C M L P K W D F J O B V X N K U Y G C H I J T A C F B G D E A S P Insert Arrangement Service Rating Number of Contacts Contact Size A C F P M N 36-55 A 31 8 16 8 for #6 wire 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated A B E L M N V W X c d f m u n v C D H F P R p w S T U Z a b h i q r x j s z y AA AE AC AD B D H k Y t AB h J I K L P U f g m k t u p v r s w AF B c b e d j D X a n T S W x y AJ Insert Arrangement Service Rating Number of Contacts Contact Size N M R V Z AH A E G F O Y g A C K J C z 36-59 A 36-60 ** 50 3 16 12 for #10 wire 40 7 16 12 for #10 wire A B C D A E D 36-64 – 4 0 (Coax) RG-11/U RG-12/U or RG-13/U B L M N V W X c d Y p v w A K J R g n u P f m H F S T U Z a b h q i j r x E t AB AA AE AC C G AH AD C B k s z y F AF D AJ Insert Arrangement Service Rating Number of Contacts Contact Size 36-65 – 4 0 (Coax) RG-59/U, RG-62/U or RG-71/U 36-71 A 3 50 12 16 1 48 50 49 51 53 55 58 62 67 56 71 80 57 64 72 76 29 60 68 65 73 66 74 27 26 34 36 48 47 24 83 85 88 30 25 75 82 91 33 37 35 41 5 6 4 9 39 22 46 23 42 9 8 10 45 21 43 13 44 20 15 18 5 6 7 38 40 2 3 4 13 10 18 11 12 19 27 20 28 29 37 26 30 34 38 40 17 21 25 33 41 43 19 12 16 24 32 36 16 87 8 11 15 23 31 14 7 14 22 79 84 86 3 70 78 81 28 61 69 77 1 2 32 52 54 59 63 31 36-73 – 7 4 (Coax) RG-62B/U 35 39 42 44 45 17 46 89 47 90 Insert Arrangement Service Rating Number of Contacts Contact Size 36-74 A 36-75 A 48 16 for #14 wire 43 1 16 8 (Coax) RG-187/U CONTACT LEGEND **Consult Sidney, NY for service rating of power contacts. 43 36-76 A 47 16 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated 10 A 1 1 2 F B 9 8 E 3 4 5 2 11 14 6 7 8 11 12 13 9 10 14 15 3 12 C 13 G 7 4 16 D 6 17 18 19 5 20 Insert Arrangement Service Rating Number of Contacts Contact Size 36-77 D 7 4 36-78 A 2 12 16 8 36-79 A 20 12 1 2 3 4 Q 5 F B 7 8 11 12 13 9 10 14 15 A U k V W G M h g Z Y a 16 17 18 19 G K 24 23 22 41 21 20 53 2 1 16 28 45 39 5 46 47 59 51 17 37 58 50 36 16 14 32 33 35 15 34 13 4 2 6 7 26 34 50 27 35 43 51 19 12 20 28 36 44 52 21 29 37 45 13 30 38 46 14 15 22 23 31 39 47 54 53 24 32 40 48 57 41 49 55 56 59 9 10 12 5 11 8 31 48 49 7 30 10 18 42 57 38 33 6 56 60 52 18 2 4 9 17 25 29 19 Insert Arrangement Service Rating Number of Contacts Contact Size 8 4 27 44 55 3 3 26 43 54 40 36-85 M = D; Bal. = A 35 16 for #12 wire 1 1 25 42 36-83 – 7 4 (Coax) RG-58/U H J 20 36-80 A 20 12 for #10 wire E F X L D Insert Arrangement Service Rating Number of Contacts Contact Size D f m j b C C e N E B T d c P 6 S R A 58 3 11 40-53 A 60 16 40-57 E 4 0 CONTACT LEGEND 44 40-61 A 1 3 55 8 12 16 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated 1 24 22 25 42 21 26 41 40 27 44 53 39 45 38 46 59 18 58 51 37 36 16 32 49 35 17 9 14 50 36 11 34 47 16 14 Insert Arrangement Service Rating Number of Contacts Contact Size 40-62 A 60 16 13 F J 40-64 – 3 20 13 12 16 8 (Coax) RG-124/U A N B P M B W R L 4 E D F 2 H J H F G 40-67 A 40-68 A 21 8 1 10 16 4 (Coax) RG-59/U 2 6 11 19 12 20 28 36 37 45 13 14 47 53 58 59 25 50 56 60 18 26 34 42 54 40 43 51 19 27 C E D F 44 H 52 40-70 A 61 16 45 8 32 49 9 33 13 10 12 11 40-73 A 61 16 1 10 16 4 (Coax) RG-9B/U CONTACT LEGEND 7 31 34 14 40-72 A 30 48 35 M Insert Arrangement Service Rating Number of Contacts Contact Size 6 46 58 36 L 29 47 15 K 5 45 57 50 16 61 28 56 59 37 17 57 44 51 J 4 27 43 61 52 18 3 26 60 39 38 35 2 25 55 53 17 33 41 49 55 16 41 20 10 24 32 40 48 54 15 23 31 39 9 42 21 5 8 22 30 38 46 4 7 21 29 3 22 B 1 24 23 A 1 E T U L K 40-66 – 4 0 (Coax) RG-63B/U D S M Insert Arrangement Service Rating Number of Contacts Contact Size C X V K J 3 E Z Y H A C D W X a 10 40-63 A 61 16 for #14 wire 1 k b K 11 12 m 8 9 34 15 c 32 33 35 12 13 48 49 V q 7 31 58 C U j n d L 30 57 51 37 10 33 15 59 18 31 48 6 T i p f 29 46 S g 45 61 52 M 5 B R h 28 56 60 39 38 8 47 50 17 30 57 55 53 19 7 4 27 44 A N 3 26 43 54 6 29 56 52 41 40 20 P 2 25 42 21 5 28 55 60 19 4 43 54 20 22 3 1 24 23 2 23 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated 1 1 6 A B 5 2 5 4 2 C 4 E D F H J 3 3 L K M Insert Arrangement Service Rating Number of Contacts Contact Size 40-74 A 40-75 E 1 4 12 0 1 1 4 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U or RG-214/U 1 5 12 20 6 13 21 29 2 7 14 22 30 3 8 15 23 31 4 9 16 24 32 1 10 17 25 33 11 18 26 34 5 19 27 35 12 28 20 36 6 13 21 29 2 22 30 3 7 14 8 15 23 31 40-80 A 1 10 16 4 4 9 16 24 32 17 25 33 18 26 34 22 11 27 35 41 21 19 38 39 40 41 42 43 44 45 37 38 39 40 41 42 43 53 47 48 54 49 55 59 50 56 60 51 57 61 52 53 46 58 47 48 54 62 49 55 59 50 56 60 51 57 61 52 46 57 38 53 51 17 50 40-82 A 62 16 48 32 34 13 10 11 12 40-85 A 60 16 for #14 wire A S R 1 6 B 1 T P h U C g 5 7 2 V f N p i W D n 4 j d 2 m 3 k X E Y b 4 q c M 3 9 33 35 7 8 31 49 36 16 62 58 37 30 47 59 14 40-81 A 62 16 for #14 wire 6 60 45 58 5 29 15 Insert Arrangement Service Rating Number of Contacts Contact Size 4 28 45 55 56 19 18 46 3 27 44 39 36 44 2 26 43 54 40 20 28 1 25 42 52 37 24 23 10 a Z L F H K J Insert Arrangement Service Rating Number of Contacts Contact Size 40-86 – 4 0 (Coax) RG-115A/U 40-87 D 7 4 CONTACT LEGEND 46 44-53 A 18 18 16 8 (Coax) RG-124/U 16 12 8 4 0 QWLD special arrangements front face of pin insert or rear of socket insert illustrated 30 2 1 29 49 48 23 47 D A C B 55 50 41 10 Insert Arrangement Service Rating Number of Contacts Contact Size 35 50 32 34 6 25 49 7 8 D 48 23 C 47 22 A B 46 21 20 11 38 42 45 19 9 40 44 Insert Arrangement Service Rating Number of Contacts Contact Size W X Z e d f j k m p r s 48-53† D 37 12 30 61 50 44 34 31 26 8 5 32 52 7 4 33 51 27 43 75 74 3 28 6 42 2 1 29 5 6 25 49 35 66 54 68 50 46 64 52 48 51 21 20 19 49 18 11 12 13 23 47 22 A C B 36 37 42 18 43 48-55† A 68 2 2 6 16 12 8 4 10 12 39 13 40 44 14 16 16 17 9 11 38 45 19 15 D 46 21 20 14 47 53 48 10 76 63 65 7 8 24 70 45 22 48-54† A 42 10 4 16 8 0 (Coax) RG-59/U 30 h n 4 41 71 23 15 41 17 15 48-57† A 42 10 4 16 8 0 2 1 29 g 3 40 62 73 24 41 17 2 55 25 14 16 18 43 39 77 72 67 26 13 1 69 27 12 39 V 9 28 10 38 78 57 29 37 59 30 36 R 12 56 31 35 24 60 58 33 5 31 26 34 4 32 52 P 16 37 36 3 27 N c 48-52† A 56 5 16 0 (Coax) RG-41/U 28 33 J 15 17 51 U b 13 2 1 H 14 C 18 15 30 M T 11 37 38 19 48-51† A 42 10 4 16 8 0 (Coax) RG-41/U 29 G 10 36 20 41 17 S 47 48 39 14 16 18 43 L a 54 E 49 40 13 40 44 F 9 12 39 K B 23 11 D 8 D 21 19 7 24 22 42 45 E 35 46 53 56 9 38 C 45 25 36 37 46 21 20 51 26 7 8 B 6 52 42 35 24 22 5 28 27 6 25 34 34 31 A 4 33 43 5 32 52 50 26 3 44 29 4 2 A 30 33 51 27 1 32 31 3 28 3 28 4 33 51 27 5 32 52 50 34 31 26 6 25 49 35 7 8 24 48 23 47 22 D A C B 36 37 46 21 20 42 45 19 10 12 39 13 40 44 14 16 18 43 Insert Arrangement Service Rating Number of Contacts Contact Size 9 11 38 41 17 15 48-60† A 42 10 4 16 8 0 (Coax) RG-214/U †Consult Sidney, NY for availablity CONTACT LEGEND 47 16 12 8 4 0 QWLD thermocouple contact availability A complete line of cylindrical connectors containing thermocouple insert arrangements is available. The contact layout for a particular arrangement will be found in either the MIL-C22992, QWLD contact arrangement section, pages 27-38, or the Special contact arrangement section, pages 39-47. All thermocouple contact layouts may contain either iron, alumel, chromel, constantan, standard (copper) or brass (dummy) contacts. See the thermocouple tabulations on the following pages. The following abbreviations are used in the contact material column in the charts that follow. Also, thermocouple contacts are color coded as shown. (This identification is made by means of small dots of stain on solder well end of the contact.) Abbreviation Material Ir. Iron Color Code Black Con Constantan Yellow Cu. Copper Alloy N/A Ch. Chromel White Al. Alumel Green Dummy Brass N/A WIRE WELL DATA Solder Well Barrel Outside Dia. Contact Size Well Inside Dia. + .004 – .002 Well Depth + .031 – .000 12 .125 .250 .166 ±.003 16 .094 .188 .125 +.002 –.004 RECOMMENDED WIRE I Chromel-Alumel Use wire in accordance with MIL-W-5848 II Iron-Constantan Use wire in accordance with MIL-W-5845 48 QWLD thermocouple arrangements Contact Size Shell Size and Arrg. Similar to MS Arrg. Total Contacts 14-59 14-53 6 16-52 16-11 2 2 16-53 16-9 4 2 16-55 16-10 3 3 16-56 16-13 2 16-57 16-10 3 16-58 16-10 16-60 16-62 12 16 Pin Insert Rotation CW 6 None 90° 2 Contact Material A = AI.; B = Ch.; C = lr.; D = Con.; E,F = Cu. A = AI.; B = Ch. 70° A = AI.; C = Ch.; B, D = Cu. 45° A = AI.; B = Ch.; C = Cu. 2 90° A = Con.; B = Cu. 3 None A = AI.; B = Cu.; C = Ch. 3 3 None A = Con.; B, C = Cu. 16-13 2 2 None A = AI,; B = Ch. 16-11 2 2 None A = Con.; B = Cu. 16-67 16-11 2 2 None A = AI.; B = Ch. 16-68 16-9 4 2 2 None A, B, C = Ch.; D = AI. 18-51 18-12 6 6 None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy 18-52 18-11 5 None A = lr.; B = Con.; C = Ch.; D = AI.; E = Dummy 18-53 18-12 6 18-54 18-15 4 18-56 18-1 10 10 45° A, C, E, G, I = Ir.; B, D, F, H, J = Con 18-57 18-12 6 6 45° A, C, E = AI.; B, D, F = Ch. 18-59 18-12 6 6 45° A, C = Ir,; B, E, F, = Con.; D = Cu. 18-60 18-11 5 45° A, D = AI.; B, C = Ch.; E = AI. 5 6 4 5 None A, D = Ir.; B, E = Con.; C, F, = Dummy None A, C = AI.; B, D = Ch. 18-61 18-12 6 6 None A, C = Ir.; B, D = Con.; E = Ch.; F = AI. 18-62 18-12 6 6 None A, B, D = Ir.; D, E, F = Con. 18-63 18-15 4 None A, C = Con.; B, D = Cu. 18-65 18-12 6 6 None A = Ir.; B = Con.; Balance = Cu. 18-66 18-1 10 10 None A, C, E, G, I = Cu.; B, D, F, H, J = Con. 4 18-67 18-12 6 18-68 18-11 5 18-69 18-1 10 18-70 18-11 5 5 18-71 18-15 4 4 None A = Con.; Balance = Cu. 18-72 18-15 4 4 None D = Con.; Balance = Cu. 18-73 18-9 7 2 5 None A = AI.; D = Ch; Balance = Cu. 18-74 18-12 6 6 None A = Ch.; B = AI.; D = lr.; E = Cu.; C, F = Con. 18-76 18-1 10 10 None A, C, E, G, I = AI.; B, D, F, H, J = Ch. 18-77 18-1 10 10 None A, C, E, G = AI.; B, D, F, H = Ch.; Bal. = Cu. 18-78 18-1 10 10 None A = AI.; B = Ch.; D, F, H, J = Con.; Bal. = Cu. 18-79 18-12 6 6 None A, F, = Ir.; B, E = Con.; C, D, = Cu. 18-80 18-15 4 18-81 18-1 10 18-82 18-1 10 20-52 20-4 4 20-56 20-7 8 6 5 10 4 None A, C, E = Cu.; B, D, F = Con. None A, D = AI.; B, C = Ch.; E = Cu. None A = AI.; B = Ch.; Balance = Cu. None A = Ir.; B = Con.; C = Ch.; D = AI.; E = Cu. None A, C = Cu.; B, D = Con. 10 None E, G = Con.; Bal. = Cu. 10 None E, G = Con.; F, H = Ir.; Bal = Cu. 4 315° A= Ir.; B = Con.; C = Ch.; D = AI 8 45° A, B, G, H = Ir.; C, D, E, F = Con. D = Ch.; E = AI.; Balance = Cu. 20-60 20-7 8 8 45° 20-61 20-29 17 17 45° A, B, M = Cu.; Balance = Con. 20-62 20-15 7 80° A, C, E, = AI.; B, D, F, = Ch.; G = Cu. 7 49 QWLD thermocouple arrangements Contact Size 16 Pin Insert Rotation CW 14 14 None A = AI.; C = Ch.; Balance = Cu. 14 14 None A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con. 7 None H = AI.; I = Ch.; Balance = Cu. 8 8 None A, B, G, H = Con.; C, D, E, F, = Cu. 20-27 14 14 None A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con. 20-29 17 17 None A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con. 20-29 17 17 None S = AI.; R = Ch.; Balance = Cu. 20-74 20-29 17 20-75 20-15 7 7 20-77 20-16 9 2 20-80 20-27 14 20-81 20-27 14 20-82 20-29 20-85 20-87 Shell Size and Arrg. Similar to MS Arrg. Total Contacts 20-64 20-27 20-65 20-27 20-67 20-16 9 20-68 20-7 20-69 20-70 20-71 12 2 17 Contact Material None A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu. None G = AI.; Balance = Ch. 7 None A = Con.; Balance = Std. 14 None A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con. 14 None A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = AI 17 17 None A, C, E, G, J, L, N, R = AI.; B, D, F, H, K, M, P, S = Ch.; T = Cu. 20-33 11 11 None K, L, = AI.; Bal. = Ch. 20-29 17 17 None A, C, E, G, J, L, N, R = Con.; Bal. = Cu. 20-88 20-27 14 14 None A, C, E = AI.; B, D, F, = Ch.; G, H, K, N = Con.; Bal. = Cu. 20-89 20-27 14 14 None B, D, F, H, J, L = AI,; A, C, E, G, I, K = Ch., M, N = Cu. 20-90 20-27 14 14 None C, G, I = Ch.; K, L, M = AI.; Bal. = Cu. 20-91 20-27 14 14 None I = Ch.; K = AI.; Bal. = Cu. 20-92 20-7 8 8 None A = AI.; H = Cu.; Bal. = Ch. 20-93 20-27 14 14 None A = Ch.; B = AI.; Bal. = Cu. None A, C, E = AI.; B, D, F = Ch.; G = Cu. 11 None A = AI.; Bal. = Ch. 20-94 20-15 7 20-99 20-33 11 7 22-57 22-14 19 19 45° A, C, E, G, J, L, N, R = lr.; B, D, F, H, K, M, P, S = Con.; T, U, V, = Cu. 22-60 22-14 19 19 45° U = AI.; N = Ch.; Bal. = Cu. 22-62 22-23 8 60° A, B, F, G = AI.; C, D, E, H = Ch. 22-68 22-19 14 14 45° A, C, E, G, J, L, M = lr.; B, D, F, H, K, P, N = Con. 22-69 22-19 14 14 45° 22-71 22-14 19 19 None V = AI.; U = Ch.; Balance = Cu. 22-72 22-5 6 2 4 None B = AI.; E = Ch.; Balance = Cu. 22-73 22-5 6 2 4 None E = AI.; B = Ch.; Balance = Cu. 22-74 22-23 8 8 None A, C, E, G = lr.; B, D, F, H = Con. 22-75 22-23 8 8 None A = AI.; B, D, G, H = Cu.; C = Ch.; E = lr.; F = Con 22-76 8 A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con. 21 21 None W = Con.; Balance = Cu. 22-77 22-19 14 14 None B, D, F, H, J, K, M, P = Cu.; A, E, L = lr.; C, G, N = Con. 22-78 22-14 19 19 None A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu. 22-79 22-10 4 4 None A, C = Con.; B, D = Cu. 22-82 22-14 19 19 None A, C, E, G, J, L, N, R, T = lr.; B, D, F, H, K, M, P, S, U = Con.; V = Cu. 22-83 22-18 8 8 None A, C, E, G = Al.; B, D, F, H, = Ch. 22-84 22-14 19 19 None A, C, S, = Ch.; B, D, T = Al.; Bal. = Cu. 22-85 22-19 14 14 None A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch. 22-89 22-88 7 7 None A, C, E = lr.; B, D, F = Con.; G = Cu. 24-56 24-20 11 2 9 45° E = Al.; F = Ch.; Balance = Cu. 24-57 24-26 24 24 45° A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al 24-62 24-28 24 24 None A, C, E, G = lr.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu. 50 QWLD thermocouple arrangements Total Contacts Contact Size Pin Insert Rotation CW Shell Size and Arrg. Similar to MS Arrg. 24-63 24-28 24 24 None A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con. 24-64 24-5 16 16 None A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con. 24-68 24-28 24 24-81 24-7 16 24-88 24-28 24 24 None A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir. 24-91 24-5 16 16 None A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch. 28-53 28-11 22 4 18 45° 28-58 28-20 14 10 4 45° A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu. 28-61 28-21 37 37 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con. 28-63 28-20 14 4 45° 12 2 10 16 Contact Material 24 None D = Con.; Balance = Cu. 14 None A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con. J, L = Al.; K, M = Ch.; Balance = Cu. A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu. 28-64 28-15 35 35 None A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.; Balance = Cu. 28-65 28-12 26 26 None A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con; Y, a = Ch.; b, d = Cu. 28-67 28-16 20 20 None U = Con.; Balance = Cu. 28-68 28-15 35 35 45° T = Al.; U = Ch.; Balance = Cu. 28-69 28-11 22 4 18 None G = Al.; R = Ch.; Balance = Cu. 28-70 28-11 22 4 18 None A = Al.; B = Ch.; Balance = Cu. 28-77 28-11 22 4 18 None J = Con.; Balance = Cu. None A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k = Ch.; Balance = Cu. 28-81 28-21 37 37 28-85 28-11 22 4 18 45° 28-91 28-9 12 6 6 None M = Ir.; L = Con.; Bal. = Cu. 28-94 28-12 26 26 None B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch. 28-98 28-21 37 37 None M = Al.; F = Ch.; Bal. = Cu. 28-99 28-12 26 26 None B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu. 28-AC 28-16 20 20 None 28-AD 28-21 37 37 45° K, M = Al.; J, L = Ch.; Bal. = Cu. A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu. A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Cu. 28-AE 28-21 37 37 None A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p. s = Cu.; Bal. = Con. 28-AF 28-18 12 12 None A, C, E, G, J, L = Ch.; Bal. = Al. 28-AG 28-12 26 26 None A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu. 28-AK 28-21 37 37 45° A, B, C, D, J, K, L, M, N, P, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al. M = Ch.; N = Al.; Balance = Cu. 32-51 32-8 30 6 24 90° 32-55 32-8 30 6 24 125° M, N = Ch.; O, P = Al.; Balance = Cu. None A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O, R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu. 32-91 32-64 54 36-53 36-7 47 36-56 36-10 48 36-57 36-8 47 36-58 36-15 36-61 36-15 36-62 36-82 54 7 40 45° 48 None A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu. 46 None W = Al.; f = Ch.; Balance = Cu. 35 35 None H = Al.; G = Ch.; Balance = Cu. 35 35 None A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu. 36-10 48 48 None A, C, E = Al.; B, D, F = Ch.; Balance = Cu. 36-52* 52 52 None v, g = Ir.; p, y, c = Con.; x = Ch.; Balance = Cu. 1 u, v, w = Al.; x, y, z = Ch.; Balance = Cu. * Amphenol arrangement 51 QWLD thermocouple arrangements Contact Size 16 Pin Insert Rotation CW 48 48 None A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q, S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.; a, c, e, g, j, m, p, r, t, v, x, z = Cu. 36-52 52 52 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF = Cu.; Bal. = Con. 40-58 40-56* 85 85 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance = Con. 40-59 40-56* 85 85 None B = Ch.; C = Con.; Balance = Cu. 40-77 40-53* 60 60 None 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu. Shell Size and Arrg. Similar to MS Arrg. Total Contacts 36-86 36-10 36-88 12 Contact Material 40-78 40-53* 60 60 None 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.; 43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu. 40-88 40-53 60 60 None 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu. None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n, q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Cu.; AV, AX, AZ, BB, BD, BF, BJ, BL, BN, BR, BT, BV = Al. 40-AA 40-56 85 85 44-57 44-52 104 104 None A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con. 44-59 44-52 104 104 None 34 = Con.; 70 = Cu. 44-60 44-52 104 104 None A, C, E, etc. = Ch., (52); B, D, F, etc. = Al., (52) None BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP, CS = Ch.; Bal. = Cu. 44-62 44-52 104 104 * Amphenol arrangement 52 MIL-C-22992, QWLD MS17343 or 10-1940XX wall mount receptacle K Z M W S R (TP) R S (TP) A V LEFT HAND B T 4 HOLES All dimensions for reference only. A Thread Class 2A (Plated) 0.1P-0.2L Double Stub B Min Full Thd K +.021 –.020 M +.010 –.000 R (TP) S +.021 –.020 T Dia +.004 –.003 V Thread Class 2A-LH (Plated) W ±.010 Z Max Part Number* Shell Size 10-194013 12 .8750 .672 .937 .797 .906 1.188 .150 .750-20UNEF .640 .700 10-194015 14 1.0000 .672 .937 .797 .969 1.281 .150 .875-20UNEF .640 .700 10-194017 16 1.1250 .672 .937 .797 1.062 1.375 .150 1.000-20UNEF .640 .700 10-194018 18 1.2500 .672 .953 .797 1.156 1.500 .177 1.125-18UNEF .625 .686 10-194020 20 1.3750 .672 .953 .797 1.250 1.625 .177 1.250-18UNEF .625 .686 10-194022 22 1.5000 .672 .953 .797 1.375 1.750 .177 1.375-18UNEF .625 .686 10-194024 24 1.7500 .672 1.047 .859 1.562 2.000 .177 1.625-18UNEF .594 .585 10-194028 28 2.0000 .672 1.047 .859 1.750 2.250 .177 1.875-16UN .594 .591 10-194032 32 2.2500 .672 1.109 .922 1.938 2.500 .209 2.0625-16UNS .530 .528 10-194036 36 2.5000 .672 1.109 .922 2.188 2.750 .209 2.3125-16UNS .530 .528 10-194040 40 2.7500 .672 1.109 .922 2.375 3.000 .209 2.625-16UN .703 .528 10-194044 44 3.0000 .672 1.109 .922 2.625 3.250 .209 2.875-16UN .703 .770 10-194048† 48† 3.2500 .672 1.109 .922 2.875 3.500 .209 3.125-16UN .703 .770 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. †Shell size 48 available in proprietary versions only. Consult Sidney, NY for availability and ordering information. 53 MIL-C-22992, QWLD MS17345 or 10-1941XX cable connecting plug K Z W S S A V LEFT HAND B All dimensions for reference only. A Thread Class 2A (Plated) 0.1P-0.2L Double Stub B +.016 –.000 K +.021 –.020 S +.021 –.020 V Thread Class 2A-LH (Plated) W ±.010 Z Max Part Number* Shell Size 10-194113 12 .8750 .688 .938 1.000 .750-20UNEF .641 .696 10-194115 14 1.0000 .688 .938 1.094 .875-20UNEF .641 .696 10-194117 16 1.1250 .688 .938 1.281 1.000-20UNEF .641 .696 10-194118 18 1.2500 .703 .957 1.375 1.125-18UNEF .625 .680 10-194120 20 1.3750 .703 .957 1.500 1.250-18UNEF .625 .680 10-194122 22 1.5000 .703 .957 1.625 1.375-18UNEF .625 .680 10-194124 24 1.7500 .766 1.016 1.875 1.625-18UNEF .625 .617 10-194128 28 2.0000 .766 1.016 2.125 1.875-16UN .625 .617 10-194132 32 2.2500 .703 1.078 2.375 2.0625-16UN .563 .555 10-194136 36 2.5000 .703 1.078 2.625 2.3125-16UN .563 .555 10-194140 40 2.7500 .703 1.078 3.000 2.625-16UN .703 .555 10-194144 44 3.0000 .703 1.078 3.250 2.875-16UN .703 .805 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. 54 MIL-C-22992, QWLD MS17346 or 10-1942XX box mount receptacle S K Z R (TP) M W R (TP) S Y A B T 4 HOLES All dimensions for reference only. A Thread Class 2A (Plated) 0.1P-0.2L Double Stub B Min Full Thd K +.021 –.010 M +.010 –.000 R (TP) S +.021 –.020 T Dia W +.004 +.020 –.003 –.030 Y +.011 –.010 Z Max Part Number* Shell Size 10-194213 12 .8750 .672 .938 .797 .906 1.188 .150 .640 .640 .700 10-194215 14 1.0000 .672 .938 .797 .969 1.281 .150 .640 .765 .700 10-194217 16 1.1250 .672 .938 .797 1.062 1.375 .150 .640 .890 .700 10-194218 18 1.2500 .672 .953 .797 1.156 1.500 .177 .625 1.015 .686 10-194220 20 1.3750 .672 .953 .797 1.250 1.625 .177 .625 1.171 .686 10-194222 22 1.5000 .672 .953 .797 1.375 1.750 .177 .625 1.296 .686 10-194224 24 1.7500 .672 1.047 .859 1.562 2.000 .177 .594 1.421 .585 10-194228 28 2.0000 .672 1.047 .859 1.750 2.250 .177 .594 1.625 .591 10-194232 32 2.2500 .672 1.110 .922 1.938 2.500 .209 .531 1.891 .528 10-194236 36 2.5000 .672 1.110 .922 2.188 2.750 .209 .531 2.078 .528 10-194240 40 2.7500 .672 1.110 .922 2.375 3.000 .209 .531 2.312 .528 10-194244 44 3.0000 .672 1.110 .922 2.625 3.250 .209 .531 2.562 .778 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. 55 MIL-C-22992, QWLD MS17347 or 10-1943XX jam nut receptacle (wall mount) S F M H N Z P A W P S .632 ±.010 V LEFT HAND E Shell Size K Dia. +.005 –.000 G ±.003 U ±.005 12,13 1.005 .562 .688 14,15 1.130 .606 .750 16,17 1.255 .699 .875 18 1.380 .739 .938 20 1.505 .783 1.000 22 1.630 .830 1.062 24 1.880 .919 1.188 28 2.130 1.007 1.312 32 2.380 1.096 1.438 36 2.630 1.183 1.562 40 2.880 1.292 1.703 MOUNTING DIMENSIONS U G .125 ±.002 DIA. PIN G U K All dimensions for reference only. Part Number* A Thread Class 2A (Plated) 0.1P-0.2L Shell Double Stud Size E Thread Class 2A (Plated) F Hex +.017 –.016 H Panel Thickness Min Max M ±.010 N +.021 –.020 P ±.010 S +.011 –.010 V Thread Class 2A-LH (Plated) W ±.010 Z Max 10-194313 12 .8750 1.000-20UNEF 1.250 .094 .188 1.141 .641 .486 1.375 .750-20UNEF .516 .483 10-194315 14 1.0000 1.125-18UNEF 1.312 .094 .188 1.141 .641 .530 1.500 .875-20UNEF .516 .483 10-194317 16 1.1250 1.250-18UNEF 1.500 .094 .188 1.141 .703 .623 1.750 1.000-20UNEF .516 .483 10-194318 18 1.2500 1.375-18UNEF 1.562 .094 .203 1.156 .703 .663 1.875 1.125-18UNEF .516 .467 10-194320 20 1.3750 1.500-18UNEF 1.750 .094 .203 1.156 .703 .707 2.000 1.250-18UNEF .516 .467 10-194322 22 1.5000 1.625-18UNEF 1.875 .094 .203 1.156 .703 .751 2.125 1.375-18UNEF .516 .467 10-194324 24 1.7500 1.875-16UN 2.125 .094 .265 1.219 .703 .840 2.375 1.625-18UNEF .516 .404 10-194328 28 2.0000 2.125-16UN 2.375 .094 .277 1.231 .785 .928 2.625 1.875-16UN .516 .392 10-194332 32 2.2500 2.375-16UN 2.625 .094 .215 1.231 .785 1.017 2.875 2.0625-16UN .516 .392 10-194336 36 2.5000 2.625-16UN 2.875 .094 .215 1.231 .785 1.104 3.125 2.3125-16UN .516 .392 10-194340 40 2.7500 2.875-16UN 3.125 .094 .215 1.231 .972 1.213 3.406 2.625-16UN .703 .392 10-194344 44 3.0000 3.125-16UN 3.375 .094 .215 1.231 .972 1.299 3.656 2.875-16UN .703 .642 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. 56 QWLD 10-1944XX thru bulkhead receptacle L S M M R (TP) H R (TP) S A A .672 MIN. FULL THREAD T 4 HOLES .155 .672 MIN. FULL THREAD All dimensions for reference only. A Thread Class 2A (Plated) 0.1P-0.2L Double Stub H Max L ±.015 M +.000 –.010 R (TP) S +.021 –.020 T Dia +.004 –.003 Part Number* Shell Size 10-194413 12 .8750 .312 2.219 1.032 .906 1.188 .150 10-194415 14 1.0000 .312 2.219 1.032 .969 1.281 .150 10-194417 16 1.1250 .312 2.219 1.032 1.062 1.375 .150 10-194418 18 1.2500 .312 2.219 1.032 1.156 1.500 .177 10-194420 20 1.3750 .312 2.219 1.032 1.250 1.625 .177 10-194422 22 1.5000 .312 2.219 1.032 1.375 1.750 .177 10-194424 24 1.7500 .312 2.219 1.032 1.562 2.000 .177 10-194428 28 2.0000 .312 2.219 1.032 1.750 2.250 .177 10-194432 32 2.2500 .312 2.219 1.032 1.938 2.500 .209 10-194436 36 2.5000 .312 2.219 1.032 2.188 2.750 .209 10-194440 40 2.7500 .312 2.219 1.032 2.375 3.000 .209 10-194444 44 3.0000 .447 2.469 1.157 2.625 3.250 .209 10-194448† 48† 3.2500 .447 2.469 1.157 2.875 3.500 .209 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. †Shell size 48 available in proprietary versions only. Consult Sidney, NY for availability and ordering information. 57 MIL-C-22992, QWLD MS17344 or 10-1946XX straight plug N .766 ±.005 Q Z B D V LEFT HAND G A All dimensions for reference only. A Thread Class 2B 0.1P-0.2L Double Stub D +.010 –.001 N +.011 –.010 Q Dia Max V Thread Class 2A-LH (Plated) Z Max Part Number* Shell Size 10-194613 12 .8750 .519±.020 .985 .030±.030 .738 1.156 .750-20UNEF .807 10-194615 14 1.0000 .519±.020 1.109 .013±.030 .738 1.281 .875-20UNEF .807 10-194617 16 1.1250 .519±.020 1.235 .091±.030 .738 1.469 1.000-20UNEF .807 10-194618 18 1.2500 .519±.020 1.359 .216±.030 .738 1.563 1.125-18UNEF .807 10-194620 20 1.3750 .519±.020 1.485 .216±.030 .738 1.688 1.250-18UNEF .807 10-194622 22 1.5000 .519±.020 1.609 .216±.030 .738 1.844 1.375-18UNEF .807 10-194624 24 1.7500 .519±.020 1.859 .184±.030 .800 2.094 1.625-18UNEF .807 10-194628 28 2.0000 .519±.020 2.109 .184±.030 .800 2.344 1.875-16UN .807 10-194632 32 2.2500 .525±.026 2.359 .190±.033 .875 2.594 2.0625-16UNS .807 10-194636 36 2.5000 .525±.026 2.609 .234±.033 .875 2.844 2.3125-16UNS .807 10-194640 40 2.7500 .710±.023 2.922 .049±.030 1.041 3.156 2.625-16UN .807 10-194644 44 3.0000 .710±.023 3.172 .049±.030 1.041 3.406 2.875-16UN .957 B *To complete 10- part number or to complete MS part number, see how to order, pg. 22. 58 G MIL-C-22992, QWLD MS17348 or 10-1949XX jam nut receptacle (box mount) L S F Z M P A H P Y S .632 ±.010 E C Shell Size K Dia. +.005 –.000 G ±.003 U ±.005 12,13 1.005 .562 .688 14,15 1.130 .606 .750 16,17 1.255 .699 .875 18 1.380 .739 .938 20 1.505 .783 1.000 22 1.630 .830 1.062 24 1.880 .919 1.188 28 2.130 1.007 1.312 32 2.380 1.096 1.438 36 2.630 1.183 1.562 40 2.880 1.292 1.703 F Hex +.017 –.016 H Panel Thickness MOUNTING DIMENSIONS U G .125 ±.003 DIA. PIN G U K All dimensions for reference only. Part Number A Thread C Class 2A (Plated) +.006 0.1P-0.2L Shell –.005 Double Stub Size E Thread Class 2A (Plated) Min Max L +.011 –.010 M ±.010 P ±.010 S +.011 –.010 Y +.011 –.010 Z Max 10-194913 12 .8750 .125 1.000-20UNEF 1.250 .094 .297 1.578 1.235 .486 1.375 .640 .389 10-194915 14 1.0000 .125 1.125-18UNEF 1.312 .094 .297 1.578 1.235 .530 1.500 .765 .389 10-194917 16 1.1250 .188 1.250-18UNEF 1.500 .094 .297 1.578 1.235 .623 1.750 .890 .389 10-194918 18 1.2500 .188 1.375-18UNEF 1.562 .094 .266 1.578 1.203 .663 1.875 1.015 .421 10-194920 20 1.3750 .188 1.500-18UNEF 1.750 .094 .266 1.578 1.203 .707 2.000 1.171 .421 10-194922 22 1.5000 .188 1.625-18UNEF 1.875 .094 .266 1.578 1.203 .751 2.125 1.296 .421 10-194924 24 1.7500 .188 1.875-16UN 2.125 .094 .328 1.641 1.266 .840 2.375 1.421 .358 10-194928 28 2.0000 .219 2.125-16UN 2.375 .094 .328 1.641 1.329 .928 2.625 1.625 .295 10-194932 32 2.2500 .219 2.375-16UN 2.625 .094 .328 1.641 1.329 1.017 2.875 1.891 .295 10-194936 36 2.5000 .219 2.625-16UN 2.875 .094 .328 1.641 1.329 1.104 3.125 2.078 .295 10-194940 40 2.7500 .219 2.875-16UN 3.125 .094 .328 1.641 1.329 1.213 3.406 2.312 .295 10-194944 44 3.0000 .219 3.125-16UN 3.375 .094 .328 1.641 1.329 1.299 3.656 2.562 .545 *To complete 10- part number or to complete MS part number, see how to order, pg. 22. 59 MIL-C-22992, QWLD Accessories M85049 or 10-522958 cable sealing adapters (plug) H E F B D LEFT HAND K A L J G C SECTION A-A A Q Type I 1.500 MAX. H C F E B K D LEFT HAND L G J Q Type II 1.500 MAX H E F B K D LEFT HAND R L J G C SECTION R-R R Q 1.500 MAX Type III 60 MIL-C-22992, QWLD Accessories M85049 or 10-522958 cable sealing adapters (plug) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Cable Range Used With Shell Size Max Dia Min Dia B +.000 –.010 C +.000 –.010 D Thread Class 2B-LH E Free F Length +.010 Max –.020 G Dia +.010 –.020 H Max J ±.031 L Thread K Class 2A (Plated) +.015 0.1P-0.2L Q –.025 Double Stub Approx. Type M85049/4A1A1 MS17342N1A1 10-522958-131 12 .530 .436 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 5.000 III M85049/4A2A1 MS17342N2A1 10-522958-132 12 .500 .406 .875 .938 .750-20UNEF .969 2.215 .938 3.678 1.125 .871 .8750 5.000 III M85049/4A3A1 MS17342N3A1 10-522958-133 12 .405 .311 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 5.000 III M85049/3A1A1 MS17340N1A1 10-522958-134 12 .375 .281 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 5.000 I M85049/3A2A1 MS17340N2A1 10-522958-135 12 .281 .188 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 5.000 I M85049/5A1A1 MS17341N1A1 10-522958-136 12 .250 .156 .825 .812 .750-20UNEF .906 1.782 .938 3.182 .563 .8750 5.000 II M85049/4A5A1 MS17342N5A1 10-522958-151 14 .625 .531 1.062 1.125 .875-20UNEF 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 5.000 III .938 M85049/4A4A1 MS17342N4A1 10-522958-152 14 .605 .511 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III M85049/4A6A1 MS17342N6A1 10-522958-153 14 .530 .436 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III M85049/3A3A1 MS17340N3A1 10-522958-154 14 .438 .344 .875 .938 .875-20UNEF .871 1.0000 5.000 I M85049/4A7A1 MS17342N7A1 10-522958-155 14 .405 .311 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III M85049/3A4A1 MS17340N4A1 10-522958-171 16 .605 .511 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I .969 2.215 1.062 3.678 1.125 M85049/3A5A1 MS17340N5A1 10-522958-172 16 .530 .436 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I M85049/3A6A1 MS17340N6A1 10-522958-173 16 .405 .311 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I M85049/4A8A1 MS17342N8A1 10-522958-181 18 .828 .715 1.188 1.250 1.125-18UNEF 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 5.000 III M85049/3A8A1 MS17340N8A1 10-522958-182 18 .699 .605 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I M85049/3A7A1 MS17340N7A1 10-522958-183 18 .625 .531 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I M85049/5A5A1 MS17341N5A1 10-522958-184 18 .605 .511 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II M85049/5A6A1 MS17341N6A1 10-522958-185 18 .530 .436 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II M85049/3A9A1 MS17340N9A1 10-522958-186 18 .500 .406 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I M85049/3A10A1 MS17340N10A1 10-522958-187 18 .455 .361 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I MS17341N2A1 10-522958-188 18 .375 .281 .750 1.125 1.125-18UNEF .969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II M85049/5A2A1 M85049/5A3A1 MS17341N3A1 10-522958-189 18 .375 .281 .875 1.125 1.125-18UNEF .969 2.469 1.312 3.932 1.125 1.125 1.2500 5.000 II M85049/5A4A1 MS17341N4A1 10-522958-190 18 .281 .188 .750 1.125 1.125-18UNEF .969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II M85049/4A12A1 MS17342N12A1 10-522958-201 20 1.055 .930 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III M85049/4A10A1 MS17342N10A1 10-522958-202 20 1.000 .875 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III M85049/4A11A1 MS17342N11A1 10-522958-203 20 .900 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III .787 M85049/3A11A1 MS17340N11A1 10-522958-204 20 .828 .715 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I M85049/4A9A1 MS17342N9A1 10-522958-205 20 .750 .637 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III M85049/5A7A1 MS17341N7A1 10-522958-206 20 .699 .605 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II M85049/5A9A1 MS17341N9A1 10-522958-207 20 .605 .511 1.000 1.250 1.250-18UNEF 1.062 2.750 1.438 4.308 1.375 1.250 1.3750 5.000 II M85049/3A12A1 MS17340N12A1 10-522958-208 20 .562 .449 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I MS17341N8A1 10-522958-209 20 .455 .361 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II M85049/4A14A1 MS17342N14A1 10-522958-221 22 1.109 .984 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 III III M85049/5A8A1 M85049/4A13A1 MS17342N13A1 10-522958-222 22 1.000 .875 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 M85049/3A14A1 MS17340N14A1 10-522958-223 22 .900 .787 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I M85049/5A14A1 MS17341N14A1 10-522958-224 22 .828 .715 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 6.000 II M85049/3A15A1 MS17340N15A1 10-522958-225 22 .805 .692 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I M85049/3A13A1 MS17340N13A1 10-522958-226 22 .750 .637 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I M85049/5A10A1 MS17341N10A1 10-522958-227 22 .562 .449 1.188 1.406 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 II M85049/5A11A1 MS17341N11A1 10-522958-228 22 .405 .311 1.000 1.375 1.375-18UNEF 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 6.000 II * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 61 MIL-C-22992, QWLD Accessories M85049 or 10-522958 cable sealing adapters (plug) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Used With Shell Size Cable Range Max Dia Min Dia B +.000 –.010 C +.000 –.010 D Thread Class 2B-LH E Free F Length +.010 Max –.020 G Dia +.010 –.020 H Max J ±.031 L Thread K Class 2A (Plated) +.015 0.1P-0.2L Q –.025 Double Stub Approx. Type M85049/4A18A1 MS17342N18A1 10-522958-241 24 1.375 1.250 2.000 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 6.000 III M85049/4A16A1 MS17342N16A1 10-522958-242 24 1.310 1.185 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III M85049/4A17A1 MS17342N17A1 10-522958-243 24 1.230 1.105 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III M85049/4A15A1 MS17342N15A1 10-522958-244 24 1.180 1.055 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III M85049/3A18A1 MS17340N18A1 10-522958-245 24 1.109 .984 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I M85049/3A16A1 MS17340N16A1 10-522958-246 24 1.055 .930 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I M85049/3A17A1 MS17340N17A1 10-522958-247 24 1.000 .675 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I M85049/5A16A1 MS17341N16A1 10-522958-248 24 .970 .857 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II M85049/5A13A1 MS17341N13A1 10-522958-249 24 .900 .787 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II M85049/5A19A1 MS17340N19A1 10-522958-250 24 .880 .755 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I M85049/5A17A1 MS17341N17A1 10-522958-251 24 .828 .715 1.188 1.625 1.625-18UNEF 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 6.000 II M85049/5A18A1 MS17341N18A1 10-522958-252 24 .805 .692 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II M85049/5A15A1 MS17341N15A1 10-522958-253 24 .750 .637 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II M85049/5A14A1 MS17341N14A1 10-522958-254 24 .630 .517 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II M85049/4A20A1 MS17342N20A1 10-522958-281 28 1.531 1.406 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III M85049/4A19A1 MS17342N19A1 10-522958-282 28 1.445 1.320 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III M85049/4A21A1 MS17342N21A1 10-522958-283 28 1.375 1.250 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III M85049/4A22A1 MS17340N22A1 10-522958-284 28 1.310 1.185 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I M85049/3A21A1 MS17340N21A1 10-522958-285 28 1.230 1.105 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I M85049/3A20A1 MS17340N20A1 10-522958-286 28 1.180 1.055 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I M85049/5A20A1 MS17341N20A1 10-522958-287 28 1.109 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II M85049/5A24A1 MS17341N24A1 10-522958-288 28 1.100 .875 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II M85049/5A23A1 MS17341N23A1 10-522958-289 28 .970 .857 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II M85049/5A19A1 MS17341N19A1 10-522958-290 28 .880 .755 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II M85049/5A21A1 MS17341N21A1 10-522958-291 28 .750 .637 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II M85049/5A26A1 MS17341N26A1 10-522958-292 28 .680 .567 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II M85049/5A25A1 MS17341N25A1 10-522958-293 28 .530 .436 1.000 1.812 1.875-16UN 1.062 2.875 2.062 4.431 1.375 1.375 2.000 6.000 II M85049/5A22A1 MS17341N22A1 10-522958-294 28 .375 .281 .875 1.875 1.875-16UN .969 2.766 2.062 4.229 1.125 1.422 2.000 6.000 II M85049/4A23A1 MS17342N23A1 10-522958-321 32 1.828 1.700 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III M85049/4A25A1 MS17342N25A1 10-522958-322 32 1.730 1.605 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III M85049/4A22A1 MS17342N22A1 10-522958-323 32 1.656 1.531 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III M85049/4A24A1 MS17342N24A1 10-522958-324 32 1.562 1.437 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III M85049/3A24A1 MS17340N24A1 10-522958-325 32 1.531 1.406 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I M85049/3A23A1 MS17340N23A1 10-522958-326 32 1.445 1.320 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I M85049/3A25A1 MS17340N25A1 10-522958-327 32 1.375 1.250 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I M85049/5A28A1 MS17341N28A1 10-522958-328 32 1.230 1.150 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II .984 1.546 M85049/5A35A1 MS17341N35A1 10-522958-329 32 1.130 1.005 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II M85049/5A31A1 MS17341N31A1 10-522958-330 32 1.109 .984 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II M85049/5A27A1 MS17341N27A1 10-522958-331 32 1.055 .930 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II M85049/5A32A1 MS17341N32A1 10-522958-332 32 .970 .857 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II M85049/5A30A1 MS17341N30A1 10-522958-333 32 .880 .755 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II M85049/5A29A1 MS17341N29A1 10-522958-334 32 .750 .637 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 62 MIL-C-22992, QWLD Accessories M85049 or 10-522958 cable sealing adapters (plug) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Used With Shell Size Cable Range Max Dia Min Dia B +.000 –.010 C +.000 –.010 D Thread Class 2B-LH E Free F Length +.010 Max –.020 G Dia +.010 –.020 H Max J ±.031 L Thread K Class 2A (Plated) +.015 0.1P-0.2L Q –.025 Double Stub Approx. Type M85049/5A34A1 MS17341N34A1 10-522958-335 32 .530 .436 1.000 2.000 2.0625-16UN 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 6.000 II M85049/5A33A1 MS17341N33A1 10-522958-336 32 .375 .281 .875 2.062 2.0625-16UN .969 2.813 2.312 4.276 1.125 1.469 2.2500 6.000 II M85049/4A30A1 MS17342N30A1 10-522958-361 36 2.062 1.917 2.750 2.500 2.3125-16UN 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 6.000 III M85049/4A29A1 MS17342N29A1 10-522958-362 36 1.984 1.859 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III M85049/4A26A1 MS17342N26A1 10-522958-363 36 1.900 1.775 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III M85049/4A28A1 MS17342N28A1 10-522958-364 36 1.825 1.799 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III M85049/4A27A1 MS17342N27A1 10-522958-365 36 1.730 1.605 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III M85049/3A26A1 MS17340N26A1 10-522958-366 36 1.656 1.531 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I M85049/3A27A1 MS17340N27A1 10-522958-367 36 1.562 1.437 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I M85049/5A40A1 MS17341N40A1 10-522958-368 36 1.445 1.320 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II M85049/5A38A1 MS17341N38A1 10-522958-369 36 1.375 1.250 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II M85049/5A36A1 MS17341N36A1 10-522958-370 36 1.310 1.185 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II M85049/5A42A1 MS17341N42A1 10-522958-371 36 1.230 1.105 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II M85049/5A39A1 MS17341N39A1 10-522958-372 36 1.180 1.055 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II M85049/5A37A1 MS17341N37A1 10-522958-373 36 1.109 .984 1.546 2.312 2.3125-16UN 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 6.000 II .970 M85049/5A41A1 MS17341N41A1 10-522958-374 36 .857 1.312 2.250 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 6.000 II M85049/4A31A1 MS17342N31A1 10-522958-401 40 2.375 2.230 3.000 2.812 2.625-16UN 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 6.000 III M85049/4A32A1 MS17342N32A1 10-522958-402 40 2.250 2.105 2.875 2.625 2.625-16UN 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 6.000 III M85049/4A33A1 MS17342N33A1 10-522958-403 40 2.145 2.000 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III M85049/4A34A1 MS17342N34A1 10-522958-404 40 2.062 1.917 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III M85049/5A43A1 MS17341N43A1 10-522958-405 40 1.940 1.815 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II M85049/5A44A1 MS17341N44A1 10-522958-406 40 1.825 1.700 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II M85049/5A45A1 MS17341N45A1 10-522958-407 40 1.730 1.605 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II M85049/5A46A1 MS17341N46A1 10-522958-408 40 1.656 1.531 2.250 2.750 2.625-16UN 1.281 4.094 2.875 6.037 2.953 2.156 2.7500 6.000 II 2.3125-16UN * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 63 MIL-C-22992, QWLD Accessories M85049 or 10-524959 cable sealing adapters (receptacle) H F E B D LEFT HAND K A J G C P SECTION A-A A N Type I Q L H C F E B K P D LEFT HAND G J N Q Type II L H F E B K D LEFT HAND R J G C P SECTION R-R R N Q L Type III 64 MIL-C-22992, QWLD Accessories M85049 or 10-524959 cable sealing adapters (receptacle) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Cable Used Range With Shell Max Min Size Dia Dia B C +.000 +.000 –.010 –.010 D Thread Class 2B-LH E Free F Length +.010 Max –.020 M85049/4A1B1 MS17342N1B1 10-524959-131 12 .530 .436 1.000 .812 .750-20UNEF 1.062 2.719 M85049/4A2B1 MS17342N2B1 10-524959-132 12 .500 .406 .875 .938 .750-20UNEF .969 2.215 M85049/4A3B1 MS17342N3B1 10-524959-133 12 .405 .311 1.000 .812 .750-20UNEF 1.062 2.719 M85049/3A1B1 MS17340N1B1 10-524959-134 12 .375 .281 .750 .812 .750-20UNEF .969 1.902 M85049/3A2B1 MS17340N2B1 10-524959-135 12 .281 .188 .750 .812 .750-20UNEF M85049/5A1B1 MS17341N1B1 10-524959-136 12 .250 .156 .625 .812 .750-20UNEF M85049/4A5B1 MS17342N5B1 10-524959-151 14 M85049/4A4B1 MS17342N4B1 10-524959-152 14 M85049/4A6B1 MS17342N6B1 10-524959-153 M85049/3A3B1 G Dia +.010 –.020 L Thread K Class 2A N H J +.015 0.1P-0.2L Dia Max ±.031 –.025 Double Stub Maz P Q Max Approx. Type .938 4.275 1.375 1.219 .8750 2.719 .765 5.000 III .938 3.678 1.125 .871 .8750 2.719 .765 5.000 III .938 4.275 1.375 1.219 .8750 1.094 .765 5.000 III .938 3.365 1.062 .621 .8750 1.094 .765 5.000 I .969 1.902 .938 3.365 1.062 .621 .8750 1.094 .765 5.000 I .906 1.782 .938 3.182 .563 .8750 1.094 .765 5.000 II .625 .531 1.062 1.125 .875-20UNEF 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 1.094 .765 5.000 III .605 .511 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094 .765 5.000 III 14 .530 .436 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094 .765 5.000 III MS17340N3B1 10-524959-154 14 .438 .344 .871 1.0000 1.219 .765 5.000 I M85049/4A7B1 MS17342N7B1 10-524959-155 14 .405 .311 1.000 1.062 .875-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.0000 1.344 .765 5.000 III M85049/3A4B1 MS17340N4B1 10-524959-171 16 .605 .511 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I M85049/3A5B1 MS17340N5B1 10-524959-172 16 .530 .436 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I M85049/3A6B1 MS17340N6B1 10-524959-173 16 .405 .311 1.000 1.062 1.000-20UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I M85049/4A8B1 MS17342N8B1 10-524959-181 18 .828 .715 1.188 1.250 1.125-18UNEF 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 1.469 .980 5.000 III M85049/3A8B1 MS17340N8B1 10-524959-182 18 .699 .605 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I M85049/3A7B1 MS17340N7B1 10-524959-183 18 .625 .531 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I M85049/5A5B1 MS17341N5B1 10-524959-184 18 .605 .511 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719 .980 5.000 II M85049/5A6B1 MS17341N6B1 10-524959-185 18 .530 .436 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719 .980 5.000 II M85049/3A9B1 MS17340N9B1 10-524959-186 18 .500 .406 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I M85049/3A10B1 MS17340N10B1 10-524959-187 18 .455 .361 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I M85049/5A2B1 MS17341N2B1 10-524959-188 18 .375 .281 .750 1.125 1.125-18UNEF .969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719 .980 5.000 II M85049/5A3B1 MS17341N3B1 10-524959-189 18 .375 .281 .875 1.125 1.125-18UNEF .969 2.469 1.312 4.932 1.125 1.125 1.2500 2.719 .980 5.000 II M85049/5A4B1 MS17341N4B1 10-524959-190 18 .281 .188 .750 1.125 1.125-18UNEF .969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719 .980 5.000 II M85049/4A12B1 MS17342N12B1 10-524959-201 20 1.055 .930 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719 .980 5.000 III M85049/4A10B1 MS17342N10B1 10-524959-202 20 1.000 .875 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719 .980 6.000 III M85049/4A11B1 MS17342N11B1 10-524959-203 20 .900 .787 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719 .980 5.000 III M85049/3A11B1 MS17340N11B1 10-524959-204 20 .828 .715 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562 .980 5.000 I M85049/4A9B1 MS17342N9B1 10-524959-205 20 .750 .637 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719 .980 5.000 III M85049/5A7B1 MS17341N7B1 10-524959-206 20 .699 .605 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.250 1.3750 2.719 .980 5.000 II M85049/5A9B1 MS17341N9B1 10-524959-207 20 .605 .511 1.000 1.250 1.250-18UNEF 1.062 2.750 1.438 4.306 1.375 1.371 1.3750 1.562 .980 5.000 II M85049/3A12B1 MS17340N12B1 10-524959-208 20 .562 .449 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562 .980 5.000 I .875 .938 .875-20UNEF .938 .969 2.215 1.062 3.678 1.125 MS17341N8B1 10-524959-209 20 .455 .361 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 1.562 .980 5.000 II M85049/4A14B1 MS17342N14B1 10-524959-221 22 1.109 .984 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562 .980 6.000 III M85049/4A13B1 MS17342N13B1 10-524959-222 22 1.000 .875 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562 .980 6.000 III M85049/3A14B1 MS17340N14B1 10-524959-223 22 .900 .787 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I M85049/5A12B1 MS17341N12B1 10-524959-224 22 .828 .715 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 1.688 .980 6.000 II M85049/3A15B1 MS17340N15B1 10-524959-225 22 .805 .692 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I M85049/3A13B1 MS17340N13B1 10-524959-226 22 .750 .637 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I M85049/5A10B1 MS17341N10B1 10-524959-227 22 .562 .449 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.584 1.688 1.343 1.5000 2.719 .980 6.000 II M85049/5A11B1 MS17341N11B1 10-524959-228 22 .405 .311 1.000 1.375 1.375-18UNEF 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 2.719 .980 6.000 II M85049/5A8B1 * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 65 MIL-C-22992, QWLD Accessories M85049 or 10-524959 cable sealing adapters (receptacle) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Cable Used Range With Shell Max Min Size Dia Dia B C +.000 +.000 –.010 –.010 E D Free F Thread Length +.010 Class 2B-LH Max –.020 G Dia +.010 –.020 L Thread K Class 2A N H J +.015 0.1P-0.2L Dia Max ±.031 –.025 Double Stub Max P Q Max Approx. Type MS85049/4A18B1 MS17342N18B1 10-524959-241 24 1.375 1.250 2.000 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 2.719 .980 6.000 III MS85049/4A16B1 MS17342N16B1 10-524959-242 24 1.310 1.185 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III MS85049/4A17B1 MS17342N17B1 10-524959-243 24 1.230 1.105 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III MS85049/4A15B1 MS17342N15B1 10-524959-244 24 1.180 1.055 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III MS85049/3A18B1 MS17340N18B1 10-524959-245 24 1.109 .984 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I MS85049/3A16B1 MS17340N16B1 10-524959-246 24 1.055 .930 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I MS85049/3A17B1 MS17340N17B1 10-524959-247 24 1.000 .675 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I MS85049/5A16B1 MS17341N16B1 10-524959-248 24 .970 .857 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II MS85049/5A13B1 MS17341N13B1 10-524959-249 24 .900 .787 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II MS85049/3A19B1 MS17340N19B1 10-524959-250 24 .880 .755 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I MS85049/5A17B1 MS17341N17B1 10-524959-251 24 .828 .715 1.188 1.625 1.625-18UNEF 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 2.719 .980 6.000 II MS85049/5A18B1 MS17341N18B1 10-524959-252 24 .805 .692 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II MS85049/5A15B1 MS17341N15B1 10-524959-253 24 .750 .637 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II MS85049/5A14B1 MS17341N14B1 10-524959-254 24 .630 .517 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II MS85049/4A20B1 MS17342N20B1 10-524959-281 28 1.531 1.406 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III MS85049/4A19B1 MS17342N19B1 10-524959-282 28 1.445 1.320 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III MS85049/4A21B1 MS17342N21B1 10-524959-283 28 1.375 1.250 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III MS85049/3A22B1 MS17340N22B1 10-524959-284 28 1.310 1.185 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I MS85049/3A21B1 MS17340N21B1 10-524959-285 28 1.230 1.105 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I MS85049/3A20B1 MS17340N20B1 10-524959-286 28 1.180 1.055 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I MS85049/5A20B1 MS17341N20B1 10-524959-287 28 1.109 .984 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279 .980 6.000 II MS85049/5A24B1 MS17341N24B1 10-524959-288 28 1.000 .875 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279 .980 6.000 II MS85049/5A23B1 MS17341N23B1 10-524959-289 28 .970 .857 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719 .980 6.000 II MS85049/5A19B1 MS17341N19B1 10-524959-290 28 .880 .755 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.719 .980 6.000 II MS85049/5A19B1 MS17341N21B1 10-524959-291 28 .750 .637 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719 .980 6.000 II MS85049/5A26B1 MS17341N26B1 10-524959-292 28 .680 .567 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.219 .980 6.000 II MS85049/5A25B1 MS17341N25B1 10-524959-293 28 .530 .436 1.000 1.812 1.875-16UN 1.062 2.875 2.062 4.431 1.375 1.375 2.0000 2.219 .980 6.000 II MS85049/5A22B1 MS17341N22B1 10-524959-294 28 .375 .281 .969 2.766 2.062 4.229 1.125 1.422 2.0000 2.219 .980 6.000 II MS85049/4A23B1 MS17342N23B1 10-524959-321 32 1.828 1.700 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469 .980 6.000 III MS85049/4A25B1 MS17342N25B1 10-524959-322 32 1.730 1.605 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469 .980 6.000 III MS85049/4A22B1 MS17342N22B1 10-524959-323 32 1.656 1.531 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469 .980 6.000 III MS85049/4A24B1 MS17342N24B1 10-524959-324 32 1.562 1.437 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469 .980 6.000 III MS85049/3A24B1 MS17340N24B1 10-524959-325 32 1.531 1.406 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I MS85049/3A23B1 MS17340N23B1 10-524959-326 32 1.445 1.320 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I MS85049/3A25B1 MS17340N25B1 10-524959-327 32 1.375 1.250 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I MS85049/5A28B1 MS17341N28B1 10-524959-328 32 1.230 1.150 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469 .980 6.000 II MS85049/5A35B1 MS17341N35B1 10-524959-329 32 1.130 1.005 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469 .980 6.000 II MS85049/5A31B1 MS17341N31B1 10-524959-330 32 1.109 .984 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II MS85049/5A27B1 MS17341N27B1 10-524959-331 32 1.055 .930 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II MS85049/5A32B1 MS17341N32B1 10-524959-332 32 .970 .858 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 2.469 .980 6.000 II MS85049/5A30B1 MS17341N30B1 10-524959-333 32 .880 .755 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II .875 1.875 1.875-16UN * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 66 MIL-C-22992, QWLD Accessories M85049 or 10-524959 cable sealing adapters (receptacle) All dimensions for reference only. MS Part Number* Superseded MS Part Number Proprietary Part Number* Cable Used Range With Shell Max Min Size Dia Dia B C +.000 +.000 –.010 –.010 D Thread Class 2B-LH E Free F Length +.010 Max –.020 G Dia +.010 –.020 L Thread K Class 2A N H J +.015 0.1P-0.2L Dia Max ±.031 –.025 Double Stub Max P Q Max Approx. Type M85049/5A29B1 MS17341N29B1 10-524959-334 32 .750 .637 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.612 1.371 2.2500 2.469 .980 6.000 II M85049/5A34B1 MS17341N34B1 10-524959-335 32 .530 .436 1.000 2.000 2.0625-16UN 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 2.469 .980 6.000 II M85049/5A53B1 MS17341N33B1 10-524959-336 32 .875 2.062 2.0625-16UN .969 2.813 2.312 4.276 1.125 1.469 2.2500 2.469 .980 6.000 II M85049/4A30A1 MS17342N30B1 10-524959-361 36 2.062 1.917 2.750 2.500 2.3125-16UN 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 2.719 .980 6.000 III M85049/4A29B1 MS17342N29B1 10-524959-362 36 1.984 1.859 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III M85049/4A26B1 MS17342N26B1 10-524959-363 36 1.900 1.775 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III M85049/4A28B1 MS17342N28B1 10-524959-364 36 1.825 1.700 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III M85049/4A27B1 MS17342N27B1 10-524959-365 36 1.730 1.605 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III M85049/3A26B1 MS17340N26B1 10-524959-366 36 1.656 1.531 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719 .980 6.000 I M85049/3A27B1 MS17340N27B1 10-524959-367 36 1.562 1.437 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719 .980 6.000 I M85049/5A40B1 MS17341N40B1 10-524959-368 36 1.445 1.320 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719 .980 6.000 II M85049/5A38B1 MS17341N38B1 10-524959-369 36 1.375 1.250 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719 .980 6.000 II M85049/5A36B1 MS17341N36B1 10-524959-370 36 1.310 1.185 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II M85049/5A42B1 MS17341N42B1 10-524959-371 36 1.230 1.105 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II M85049/5A39B1 MS17341N39B1 10-524959-372 36 1.180 1.055 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II M85049/5A37B1 MS17341N37B1 10-524959-373 36 1.109 .984 1.546 2.312 2.3125-16UN 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 2.719 .980 6.000 II M85049/5A41B1 MS17341N41B1 10-524959-374 36 .970 .857 1.312 2.250 2.3125-16UN 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 2.719 .980 6.000 II M85049/4A31B1 MS17342N31B1 10-524959-401 40 2.375 2.230 3.000 2.812 2.625-16UN 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 2.969 .980 6.000 III M85049/4A32B1 MS17342N32B1 10-524959-402 40 2.250 2.105 2.875 2.625 2.625-16UN 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 2.969 .980 6.000 III M85049/4A33B1 MS17342N33B1 10-524959-403 40 2.145 2.000 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969 .980 6.000 III M85049/4A34B1 MS17342N34B1 10-524959-404 40 2.062 1.917 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969 .980 6.000 III M85049/5A43B1 MS17341N43B1 10-524959-405 40 1.940 1.815 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II M85049/5A44B1 MS17341N44B1 10-524959-406 40 1.825 1.700 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II M85049/5A45B1 MS17341N45B1 10-524959-407 40 1.730 1.605 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II M85049/5A46B1 MS17341N46B1 10-524959-408 40 1.656 1.531 2.250 2.625 2.625-16UN 1.281 4.094 2.875 6.057 2.953 2.156 2.7500 2.969 .980 6.000 II .375 .281 * Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. 67 MIL-C-22992, QWLD Accessories 10-350695 adapter, 10-350349 cable clamp 10-350695-XX( ) adapter L C J V LEFT HAND F E A B 10-350349-( )3 cable clamp M Y K A Z MS3420-( )A sleeve 68 MIL-C-22992, QWLD Accessories 10-350695 adapter, 10-350349 cable clamp All dimensions for reference only. Shell Size Proprietary Adapter Part Number* Clamp Part Number** Superseded MS Part Number A Thread Class 2A (Plated) B Min Full Thd C J E Dia +.010 F +.000 +.010 –.010 –.020 ±.010 –.000 K Dia L Free Closed ±.010 M Max V Thread Class 2B-LH Y Max 12 10-350695-13( ) 10-350349-12( ) MS3057-4C .625-24UNEF .422 .386 .875 .688 .484 .302 .094 1.609 1.375 .750-20UNEF .906 14 10-350695-15( ) 10-350349-14( ) MS3057-6C .750-20UNEF .422 .500 1.000 .812 .484 .428 .230 1.609 1.375 .875-20UNEF 1.031 16 10-350695-17( ) 10-350349-16( ) MS3057-8C .875-20UNEF .422 .625 1.188 .938 .481 .515 .316 1.609 1.375 1.000-20UNEF 1.125 18 10-350695-18( ) 10-350349-18( ) MS3057-10C 1.000-20UNEF .422 .752 1.312 1.062 .481 .614 .378 1.609 1.437 1.125-18UNEF 1.234 20 10-350695-20( ) 10-350349-20( ) MS3057-12C 1.1875-18UNEF .422 .891 1.438 1.250 .481 .738 .445 1.609 1.437 1.250-18UNEF 1.484 22 10-350695-22( ) 10-350349-20( ) MS3057-12C 1.1875-18UNEF .422 .891 1.562 1.250 .481 .738 .445 1.609 1.437 1.375-18UNEF 1.484 .611 1.609 1.562 1.625-18UNEF 1.671 24 10-350695-24( ) 10-350349-24( ) MS3057-16C 1.4375-18UNEF .422 1.111 1.812 1.500 .481 .926 28 10-350695-28( ) 10-350349-24( ) MS3057-16C 1.4375-18UNEF .422 1.111 2.062 1.500 .481 .926 32 10-350695-32( ) 10-350349-32( ) MS3057-20C 1.750-18UNS .481 1.200 .922 1.781 1.812 2.0625-16UNS 2.188 .922 1.781 2.062 2.3125-16UNS 2.344 .484 1.422 2.250 1.875 .611 1.781 1.562 1.875-16UN 36 10-350695-36( ) 10-350349-36( ) MS3057-24C 2.000-18UNS .562 1.672 2.500 2.125 .481 1.363 40 10-350695-40( ) 10-350349-40( ) MS3057-28C 2.250-16UN .562 1.914 2.812 2.375 .672 1.611 1.180 2.032 2.062 2.625-16UN * To attach the cable clamp to the left hand accessory threads of QWLD connectors, adapter 10-350695-XX is needed. Order this proprietary adapter from column 2 and suffix the part number with the finish desired, listed in the finish chart below. ** Order MS clamp (column 3) to accommodate the cable type being used. Standard finish on the clamp is olive drab, cadmium plate. Z Dia Finish Chart for Adapter & Clamp Shell Size Sleeve† MS Part Number Free ±.016 Closed 12 MS3420-4A .219 14 MS3420-4A MS3420-6A 16 Suffix Bright Cadmium Plate -XX1 .010 Black Anodize -XX2 .219 .312 .020 .114 Olive Drab, Cadmium Plate -XX3 Gray Anodize -XX4 MS3420-6A MS3420-8A .312 .438 .085 .222 Anodic Coating -XX* Olive Drab Cadmium Plate, Nickel Base -XX9 18 MS3420-6A MS3420-10A .312 .438 .085 .200 20 MS3420-8A MS3420-12A .438 .541 .177 .270 22 MS3420-8A MS3420-12A .438 .541 .177 .270 24 MS3420-8A MS3420-12A MS3420-16A .438 .541 .750 .186 .260 .433 28 MS3420-8A MS3420-12A MS3420-16A .438 .541 .750 .186 .260 .433 32 MS3420-12A MS3420-16A MS3420-20A .541 .750 .938 .273 .442 .620 36 MS3420-16A MS3420-18A MS3420-24A .750 .938 1.125 .358 .504 .682 40 MS3420-16A MS3420-20A MS3420-28A .750 .938 1.250 .368 .514 .816 * No third digit required for 10-350695 and not available for 10-350349. †Sleeve not supplied as part of assembly. Order separately by part number shown 69 1.671 2.594 MIL-C-22992, QWLD Accessories protective covers L MS17350 10-524915-( ) plug protective cover C B A A L MS17349-XXB 10-524916-( ) receptacle protective cover D C B MS17349-XXA 10-524917-( ) receptacle protective cover A L D C F 70 MIL-C-22992, QWLD Accessories protective covers *Order MS-approved covers as per coded part number example: All dimensions for reference only. Shell Size Plug Protective Cover MS Part Number* Plug Protective Cover Proprietary Part Number** A Thread B Class 2A (Plated) Dia 0.1P-0.2L +.010 Double Stub –.005 12 MS17350-( ) 10-524915-12( ) .8750 14 MS17350-( ) 10-524915-14( ) 16 MS17350-( ) 18 20 C Approx. L Max .156 5.000 1.500 1.0000 .156 5.000 1.500 10-524915-16( ) 1.1250 .156 5.000 1.500 MS17350-( ) 10-524915-18( ) 1.2500 .180 5.000 1.500 MS17350-( ) 10-524915-20( ) 1.3750 .180 5.000 1.500 22 MS17350-( ) 10-524915-22( ) 1.5000 .180 6.000 1.500 24 MS17350-( ) 10-524915-24( ) 1.7500 .180 6.000 1.500 28 MS17350-( ) 10-524915-28( ) 2.0000 .180 6.000 1.500 32 MS17350-( ) 10-524915-32( ) 2.2500 .209 6.000 1.500 36 MS17350-( ) 10-524915-36( ) 2.5000 .209 6.000 1.500 40 MS17350-( ) 10-524915-40( ) 2.7500 .209 6.000 1.500 PART NUMBER MS17350 C 28 A 1 2 3 4 1. MS Number MS17350 designated plug protective cover MS17349 designated receptacle protect cover 2. Cover Finish - C for conductive, N for non-conductive. 3. Cover Size - Shell size of connector with which cover is used. 4. Cover Type - (MS17349 only) A - Washer Termination, used with: MS17345 line (cable connecting) plug MS17347 jam nut receptacle MS17348 jam nut receptacle B - Eyelet Termination - used with: MS17343 wall mount receptacle MS17346 box mount receptacle **Order Proprietary covers as per coded part number example: PART NUMBER 10-524915 Receptacle Protective Cover MS Part Number* Receptacle Protective Cover Proprietary Part Number** A Thread Class 2B 0.1P-0.2L Double Stub B +.010 –.005 C Approx. 12 MS17349-( )B MS17349-( )A 10-524916-12( ) 10-524917-12( ) .8750 .156 5.000 1.094 1.016 .765 14 MS17349-( )B MS17349-( )A 10-524916-14( ) 10-524917-14( ) 1.0000 .156 5.000 1.219 1.141 .765 16 MS17349-( )B MS17349-( )A 10-524916-16( ) 10-524917-16( ) 1.1250 .156 5.000 1.344 1.266 .980 18 MS17349-( )B MS17349-( )A 10-524916-18( ) 10-524917-18( ) 1.2500 .180 5.000 1.469 1.391 .980 20 MS17349-( )B MS17349-( )A 10-524916-20( ) 10-524917-20( ) 1.3750 .180 5.000 1.562 1.516 .980 22 MS17349-( )B MS17349-( )A 10-524916-22( ) 10-524917-22( ) 1.5000 .180 6.000 1.688 1.641 .980 24 MS17349-( )B MS17349-( )A 10-524916-24( ) 10-524917-24( ) 1.7500 .180 6.000 1.938 1.891 .980 28 MS17349-( )B MS17349-( )A 10-524916-28( ) 10-524917-28( ) 2.0000 .180 6.000 2.219 2.141 .980 32 MS17349-( )B MS17349-( )A 10-524916-32( ) 10-524917-32( ) 2.2500 .209 6.000 2.469 2.391 .980 36 MS17349-( )B MS17349-( )A 10-524916-36( ) 10-524917-36( ) 2.5000 .209 6.000 2.719 2.641 .980 40 MS17349-( )B MS17349-( )A 10-524916-40( ) 10-524917-40( ) 2.7500 .209 6.000 2.969 2.891 .980 Shell Size D Dia. Max 71 F +.010 –.000 1 L Max – 28 5 2 3 1. Base Number 10-524915 designates plug cover with chain 10-524916 designates receptacle cover with chain 10-524917 designates receptacle cover with chain and attaching ring 2. Cover Size - Shell size of connector with which cover is used. 3. Finish 5 - Non-conductive Alumilite finish 9 - Conductive olive drab cadmium plate over nickel finish Note: Protective covers are supplied with all M85049 style cable sealing adapters. QWLD Accessories sealing gaskets .031 ±.010 (10-36675) .031 ±.005 (10-40450) R (TP) R (TP) F T 4 HOLES All dimensions for reference only. Part Number* Shell Size F Dia +.016 –.000 R ±.010 T Dia ±.010 Part Number** Shell Size F Dia +.016 –.000 R ±.010 T Dia ±.010 .172 10-36675-14 12 .875 .906 .172 10-40450-14 12 .875 .906 10-36675-16 14 1.000 .969 .172 10-40450-16 14 1.000 .969 .172 10-36675-18 16 1.125 1.063 .203 10-40450-18 16 1.125 1.063 .203 10-36675-20 18 1.250 1.156 .203 10-40450-20 18 1.250 1.156 .203 10-36675-22 20 1.375 1.250 .203 10-40450-22 20 1.375 1.250 .203 10-36675-24 22 1.500 1.375 .203 10-40450-24 22 1.500 1.375 .203 10-36675-28 24 1.750 1.563 .203 10-40450-28 24 1.750 1.563 .203 10-36675-32 28 2.000 1.750 .219 10-40450-32 28 2.000 1.750 .219 10-36675-36 32 2.188 1.938 .219 10-40450-36 32 2.188 1.938 .219 10-36675-40 36 2.438 2.188 .219 10-40450-40 36 2.437 2.188 .219 10-36675-44 40 2.688 2.375 .219 10-40450-44 40 2.688 2.375 .219 10-36675-48 44 2.938 2.625 .219 10-40450-48 44 2.938 2.625 .219 *10-36675-( ) for operating temperature range – 67° to + 275°F. Order by part number listed to accommodate shell size being used. **10-40450-( ) for operating temperature range 0° to + 275°F. Order by part number listed to accommodate shell size being used. 72 QWLD Accessories encapsulation adapter L Q .425 REF N C H D G Y A LEFT HAND .180 ±.005 .060 ±.005 .060 ±.005 +.010 .125 –.000 All dimensions for reference only. A Thread Class 2B-LH C Dia ±.031 D Dia ±.005 G +.010 –.000 H Dia ±.005 L ±.031 N ±.016 .673 1.175 .479 .923 .798 .797 1.175 .479 1.047 .922 .923 1.175 .479 1.172 1.048 1.094 1.047 1.175 .479 1.297 1.172 1.172 1.219 1.172 1.175 .479 1.422 1.297 Part Number* Shell Size 10-242067-13( ) 12 .750-20UNEF .500 .673 .766 10-242067-15( ) 14 .875-20UNEF .656 .797 .844 10-242067-17( ) 16 1.000-20UNEF .813 .923 .969 10-242067-18( ) 18 1.125-18UNEF .938 1.047 10-242067-20( ) 20 1.250-18UNEF 1.063 Q ±.010 Y Dia 10-242067-22( ) 22 1.375-18UNEF 1.188 1.297 1.344 1.297 1.175 .479 1.547 1.423 10-242067-24( ) 24 1.625-18UNEF 1.312 1.537 1.469 1.422 1.175 .479 1.787 1.662 10-242067-28( ) 28 1.875-16UN 1.500 1.797 1.719 1.679 1.175 .479 2.047 1.922 10-242067-32( ) 32 2.0625-16UN 1.800 2.047 2.000 1.960 1.175 .479 2.297 2.172 10-242067-36( ) 36 2.3125-16UN 2.000 2.297 2.219 2.179 1.175 .479 2.547 2.422 10-242067-40( ) 40 2.625-16UN 2.250 2.609 2.469 2.429 1.375 .667 2.859 2.734 10-242067-44( ) 44 2.875-16UN 2.459 2.857 2.782 2.742 1.375 .667 3.110 2.982 10-242067-48( ) 48 3.125-16UN 2.719 3.107 3.046 3.004 1.375 .667 3.360 3.244 *Order by part number listed to accommodate shell size being used. To complete part number add suffix for finish desired from table below. Finish 73 Suffix Bright Cadmium Plate -XX1 Black Anodize -XX2 Cadmium Plate, Olive Drab -XX3 Gray Anodize -XX4 Anodic Coating -XX5 Cadmium Plate Nickel Base -XX7 QWLD Accessories encapsulation end bell L D C All dimensions are for reference only. Part Number* C Dia D Dia ±.010 L ±.010 10-130999-13 .766 +.000 –.010 .484 1.273 10-130999-15 .844 +.000 –.010 .609 1.273 10-130999-17 .969 +.000 –.010 .734 1.273 10-130999-18 1.094 +.000 –.010 .859 1.242 10-130999-20 1.219 +.000 –.015 .984 1.242 10-130999-22 1.344 +.000 –.015 1.109 1.242 10-130999-24 1.469 +.000 –.015 1.234 1.179 10-130999-28 1.719 +.000 –.015 1.427 1.179 10-130999-32 2.000 +.000 –.020 1.708 1.101 10-130999-36 2.219 +.000 –.020 1.895 1.101 10-130999-40 2.469 +.000 –.020 2.130 1.101 10-130999-44 2.782 +.000 –.020 2.443 1.101 10-130999-48 3.046 +.000 –.020 2.707 1.101 *Order by part number listed to accommodate shell size being used. 74 MIL-C-22992, QWLD MS solder contacts Machine copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Gold plated contacts are also available (See how to order, page 22). SOLDER CONTACTS* Part Number Pin/ Socket Mating End Size Wire Barrel Size Allowable Wire Size Test Current** Amps 10-36982-3 10-36983-3 Pin Socket 16 Long 16 16 18 20 22 13 10 7.5 5 10-36982-5 10-36983-5 Pin Socket 12 12 12 10 23 17 10-407028-8 10-407029-8 Pin Socket 8 8 8 10 46 33 10-407028-4 10-407029-4 Pin Socket 4 4 4 6 80 60 10-407028-3 10-407029-3 Pin Socket 0 0 0 1 2 150 125 100 * Solder Wells Unfilled **Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. Table I CONTACT ARRANGEMENT SERVICE RATING MS Service Rating Inst. Recommended Operating Voltage* at Sea Level DC AC(RMS) 250 200 Table II ALTITUDE VOLTAGE DERATING** CHART Effective Creepage Mechanical Distance Spacing Nom. Nom. 1/16 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, desigers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Nominal Distance Standard Sea Level Conditions Pressure Altitude† 50,000 Feet Minimum Flashover Voltage AC(RMS) Pressure Altitude† 70,000 Feet Minimum Flashover Test Voltage Voltage AC(RMS) AC(RMS) Airspace Creepage Minimum Flashover Voltage AC(RMS) Test Voltage AC(RMS) Inst. 1/32 1/16 1400 1000 550 400 325 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 MS Service Rating Test Voltage AC(RMS) 260 † Not corrected for changes in density due to variations in temperature. **No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 75 QWLD solderless (crimp) contacts Machined from copper alloys and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all MS insert arrangements and are identified with an Amphenol ® proprietary number. Gold plated contacts are also available (See how to order, page 22). CRIMP CONTACTS* Part Number Pin/ Socket 10-40557 Pin 10-40556 or 10-597109-171 Socket 10-40561 Pin 10-40560 or 10-597109-131 Socket 10-40792 Pin 10-40793 Socket 10-40564 Pin 10-40565 Socket 10-40562 Pin 10-40563 Socket Mating End Size Wire Barrel Size Allowable Wire Size Required Wire Adapter Sleeve Test Current** Amps 16 Long 16 16 18 20 22* – – – 10-74696-6 12 12 12 14 – – 23 17 8 8 8 10* – 10-74696-1 46 33 4 4 4 6* – 10-74696-2 80 60 0 0 0 2* – 10-74696-7 150 100 13 10 7.5 5 * When using wire adapter sleeve shown. ** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. Table I CONTACT ARRANGEMENT SERVICE RATING MS Service Rating Recommended Operating Voltage* at Sea Level Table II ALTITUDE VOLTAGE DERATING** Effective Creepage Mechanical Spacing Distance Nom. Nom. DC AC (RMS) Inst. 250 200 1/16 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Nominal Distance MS Service Rating Airspace Creepage Standard Sea Level Conditions Pressure Altitude† 50,000 feet Pressure Altitude† 70,000 feet Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Inst. 1/32 1/16 1400 1000 550 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 † Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 76 QWLD application tools Complete installation instructions (L-615) for Amphenol® QWLD Series Connectors are available on request. The following data includes information pertaining to the application tools which have been established for crimping, inserting and removing crimp contacts used in QWLD Series Connectors. Contact Crimping, Insertion & Removal Tools Crimping Tool Positioner/ Turret Contact Size Contact Style M22520/1-01 * 16 Pin & Socket 11-7345 M22520/1-01 * 12 Pin & Socket 11-7082 11-8250 Kit ** ** 8 Pin & Socket 11-8220 11-8250 Kit ** ** 4 Pin & Socket 11-7365-4† Pin 11-7370-4† Socket 11-7674-2† ** ** 0 Pin & Socket 11-7365-5† Pin 11-7370-5† Socket 11-7674-3† * Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266 **For appropriate crimp tool and positioner refer to Pico Crimping Tool Co. † Tool used with Arbor press 11-7364. 77 Insertion Tool Removal Tool 11-8250 Kit ® Amphenol Heavy Duty Cylindrical Connectors QWL Series Amphenol® QWL Series Connectors are tailor made for compact, heavy duty industrial use. The outstanding performance of this series makes it well suited for shipboard installations and ground support power distribution applications where physical strength and dependability are key requirements. wall mount receptacle thru bulkhead receptacle straight plug cable connecting plug The QWL Series are a versatile, economical alternative to military qualified designs. Equivalent MS shell sizes and insert arrangements offer compatibility with all standard cable types. MIL-C-22992 environmental connector requirements (see page 1) are used as a performance criteria base for this series to assure reliability under the most severe conditions. The design features of this connector series provide: • Exceptional Service - high strength aluminum shells with Alumilite 225* hard anodic finish and shock resistant resilient inserts. box mount receptacle flange mount plug • Foolproof Operation - rugged double stub coupling threads, left hand accessory threads and simple single keyway mating. • Versatility - both MS and custom insert patterns available for a wide variety of multiconductor cables. A complete line of accessories is available for use with QWL Series connectors, including cable sealing and clamp adapters, protective covers, flange gaskets and banding clamps. jam nut receptacle (wall mount) jam nut receptacle (box mount) For further information concerning Amphenol® QWL Series connectors, request catalog 12-053 or contact your local sales office. * Registered trademark of Aluminum Company of America 78