MS3420-4

97 series accessories cable clamps, bushing Cable Clamp MS3057A Type For jacketed cable or wires protected by tubing. Both clamping halves float for maximum strain relief. For unjacketed cable or wires, use corresponding MS3420 bushing. To order clamp with bushing, add -1 to the 97-number. Two telescoping bushings are furnished with shells sizes 24 and larger. This cable clamp is die-cast zinc alloy and limited to the following plating variations: Std - olive drab/green chromate (621) - black zinc alloy (676) - bright nickel (624) - green zinc alloy (689) - electroless nickel C B A Amphenol Part Number Max. O.D. Cable Shell Size Inch mm A B Inch mm Inch C mm Inch mm Threads 97-3057-1004 10SL, 12S 5/16 7.92 .795 20.19 .842 21.39 5/16 7.92 5/8-24 97-3057-1007 12SL, 14, 14S 7/16 11.10 .850 21.59 .995 25.27 7/16 11.10 3/4-20 97-3057-1008 16, 16S 9/16 14.27 .920 23.37 1.120 28.45 9/16 14.27 7/8-20 97-3057-1010 18 5/8 15.88 .920 23.37 1.216 30.89 5/8 15.88 1 -20 Bushing MS3420 97-3057-1012 20, 22 3/4 19.05 .927 23.55 1.403 35.64 3/4 19.05 1-3/16-18 Rubber bushing specifically designed for MS3057A type cable clamp. Can also be used as a reducing bushing. 97-3057-1016 24, 28 15/16 23.80 1.015 25.78 1.683 42.75 15/16 23.80 1-7/16-18 97-3057-1020 32 1-1/4 31.75 1.095 27.81 2.050 52.07 1-1/4 31.75 1-3/4-18 97-3057-1024 36 1-3/8 34.93 1.156 29.36 2.245 57.02 1-3/8 34.93 2 -18 Bushing Part Number MS D 1/16 1/64 C B F E A Amphenol A B C D Inch mm Inch mm Inch mm Inch E mm F Inch mm Inch mm 3420-3 9779-513-3 .130 3.30 .210 5.33 .374 9.50 2.875 73.03 1/32 .79 1/32 .79 3420-4 9779-513-4 .220 5.59 .302 7.67 .500 12.70 2.750 69.85 1/32 .79 1/32 .79 3420-6 9779-513-6 .312 7.92 .427 10.85 .614 15.60 2.625 66.68 1/32 .79 1/16 1.57 3420-8 9779-513-8 .437 11.10 .552 14.02 .739 18.77 2.500 63.50 1/16 1.57 1/16 1.57 3420-10 9779-513-10 .562 14.27 .615 15.62 .889 22.58 2.375 60.33 1/16 1.57 1/16 1.57 3420-12 9779-513-12 .625 15.88 .740 18.80 1.084 27.53 2.250 57.15 1/16 1.57 1/16 1.57 3420-16 9779-513-16 .750 19.05 .927 23.55 1.309 26.39 2.125 53.98 1/16 1.57 1/16 1.57 1/32 Radius 3420-20 9779-513-20 .937 23.80 1.240 31.50 1.591 40.41 2.000 50.80 1/16 1.57 1/16 1.57 45° 3420-24 9779-513-24 1.250 31.75 1.365 34.67 1.842 46.79 1.875 47.63 1/16 1.57 1/16 1.57 Cable Clamp AN3057 Type For jacketed cable or wires protected by tubing. Cable or wires should be centered in jaws of clamp for maximum grip. A vinyl or rubber bushing or sleeve may be used for centering. One resilient washer and two fiber washers are included with each clamp. This cable clamp is die-cast zinc alloy and limited to the following plating variations: Std - olive drab/green chromate (621) - black zinc alloy (676) - bright nickel (624) - green zinc alloy (689) - electroless nickel Fits Shell Size AN Number Fits AN Fitting Size Max O.D. Cable F E B A B Inch mm Inch mm Inch E mm Inch A F mm Inch mm Threads Weight Lbs. per 100 97-3057-3 8S, 10S 3 1/4 6.35 11/16 17.45 1 25.40 1/4 6.35 1/8 3.18 1/2-28 1.89 97-3057-4 10SL, 12S 4 5/16 7.92 25/32 19.84 1 25.40 5/16 7.92 3/16 4.75 5/8-24 2.12 97-3057-6 12SL, 14, 14S 6 7/16 11.10 15/16 23.80 1-5/64 27.38 7/16 11.10 3/16 4.75 3/4-20 2.94 97-3057-8 16, 16S 8 9/16 14.27 1-1/16 26.97 1-1/8 28.58 9/16 14.27 9/32 7.14 7/8-20 3.44 97-3057-10 18 10 5/8 15.88 1-3/16 30.15 1-1/8 28.58 5/8 15.88 5/16 7.92 1 -20 4.72 97-3057-12 20, 22 12 3/4 19.05 1-3/8 34.93 1-3/16 30.15 3/4 19.05 5/16 7.92 1-3/16-18 6.10 97-3057-16 24, 28 16 15/16 23.80 1-5/8 41.28 1-5/16 33.32 15/16 23.80 3/8 9.53 1-7/16-18 8.71 97-3057-20 32 20 1-1/4 31.75 1-15/16 49.20 1-1/2 38.10 1-1/4 31.75 1/2 12.70 1-3/4-18 14.85 97-3057-24 36 24 1-3/8 34.93 2-3/16 55.55 1-9/16 39.67 1-3/8 34.93 19/32 15.06 2 -18 18.15 97-3057-28 40 28 1-5/8 41.28 2-1/2 63.50 1-9/16 39.67 1-5/8 41.28 21/32 16.66 2-1/4-16 21.50 33