MSPEC6P2B5010

Single Pair Ethernet IP67 Circular Push-Pull Connectors and Cables NEXT GENERATION IEC63171-6 (M12 PUSH-PULL FORM FACTOR) COMPLIANT SEALED INDUSTRIAL ETHERNET CONNECTORS Single Pair Ethernet (SPE) connectors for Industrial applications bring direct Ethernet connectivity to peripheral devices like sensors, actuators, and vision system cameras that operate at speeds up to 1Gb/s. SPE eliminates slow expensive and complex fieldbus protocols and connections by simplifying and standardizing existing and new industrial network systems. TARGET MARKETS IP67 rated with M12 size circular form factor. Robust right angle and vertical PCB mount, and solder cup SPE jacks mate to field terminable plugs, providing a complete shielded interface with latching features. Current handling up to 4A supports PoDL (Power over Data Link) capability up to 1km. § Fully compatible with IEC 63171-6 interconnects from other authorized vendors ensuring future compatibility and investment security § Single pair cable reduces cost, weight, and space requirements compared to 2 and 4 pair cabling § Mechanically robust and secure latching with 360° shielding for excellent performance in harsh environments § Field terminable IDC plugs provide installation flexibility § IP67 sealing provides protection from water ingress including full immersion in mated conditions § High strength plastic plug housing and coupling mechanism reduces weight and cost FEATURES BENEFITS § Two-way 600MHz data transmission § Two-way 600MHz data transmission & supports ethernet protocols of 1Gb/s up to 40m, and 10Mb/s up to 1km § 2 contacts and 2 wire cable for single pair ethernet § Minimizes connector and cabling cost, increases cabling density and ease of installation § 4A current rating § Supports PoDL, up to 1km cable lengths with no signal degradation upto rated data transmission § Panel mount jacks include gasket and mounting nut § Provides IP67 sealing to mounting panel § 360° interior shielding through the mated connectors § Fully shields signal pair providing excellent EMI immunity § Thermoplastic plug connector housings § Strong, lightweight assembly reduces cost of cables § Zinc diecast panel jack housing § High strength and durability with reduced cost § Positive latching with circular push-pull coupling ring § Prevents accidental unmating § IDC (Insulation Displacement) termination plugs § Easier field installation and service www.amphenol-cs.com Single Pair Ethernet IP67 Circular Push-Pull Connectors and Cables TECHNICAL INFORMATION MATERIAL SPECIFICATIONS § Housings: High temperature thermoplastic, UL94V-0 § Amphenol Product Specification: S6140C flammability rating, black § Contacts: Copper alloy, plated with 50μin Ni overall and 30μin Gold in mating area § EMI Shields: Stainless steel, matte tin or nickel plated § Gaskets, Grommets & O-Rings: Silicone rubber MECHANICAL PERFORMANCE § Insertion/Withdrawal Force (Mating/Unmating): 50N (4.5 lbs force) max. (per IEC 60512-13-2, Test 13b) § Pull-Out Force (Forceful Disengagement): 100N (11.2 lbs- force) min. (per IEC 60512-15-6, Test 15f) § Durability: 1000 mating cycles, MPL1000 (per IEC 60512- 9-1, Test 9a) § Mechanical Shock: 300m/s2, half-sine pulses, 11ms (per IEC 60512-6-3, Test 6c) § Vibration, Sinusoidal: 10Hz–500Hz, 0.35mm, 50m/s2 (per IEC 60512-6-4, Test 6d) ELECTRICAL PERFORMANCE § Current Rating: 4A (per IEC 60512, Test 5b) § Voltage Rating: 60VDC max. § Contact Resistance: 20mΩ max. (per IEC 60512-2-1, Test 2a, Method A) § IEC 63171-6 § IEC 61076-2 (for push pull) § IEEE 802.3cg (10BASE-T1) § IEEE 802.3bw (100BASE-T1) § IEEE 802.3bp (1000BASE-T1) § IEEE 802.3bu (PoDL) ENVIRONMENTAL § Operating Temperature: -40°C to +85°C § Thermal Shock: 10 cycles between -40°C and +85°C (per IEC 60512-11-4, Test 11d) § Humidity: Low temperature +25°C, high temperature +65°C, cold sub-cycle -10°C, 93% humidity, 10 x 24hr cycles (per IEC 60068-2-38, Test Z/AD) APPROVALS AND CERTIFICATIONS § RoHS per EU directive 2011/65/EU and amendments § UL pending TARGET MARKETS/APPLICATIONS Traffic Control Monitoring Systems § Shielding Resistance: 100mΩ max. (per IEC 60512-2-1, Test 2a, Method A) § Insulation Resistance: 500MΩ min. @ 500VDC test voltage (per IEC 60512-3-1, Test 3a, Method A) § Dielectric Withstanding Voltage: 1000VDC contact-to- contact and 2250VDC contact-to-shield (per IEC605124-1, Test 4a, Method A) § Ingress Protection Rating – IP67 in mated condition PACKAGING § Tray & Bulk pack (jack connectors, plug connector components) Data Industrial Internet of Things Factory/Process Automation Machine to Machine Sensors, Actuators & Network Nodes Robotics Test Equipment Building Automation - Environmental, Lighting Healthcare Medical Equipment § Tape & Reel (right angle Pin-in-Paste jack connectors) § Single Kit (plug connector components) § Carton (cable assemblies) www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. Single Pair Ethernet IP67 Circular Push-Pull Connectors and Cables PART NUMBERS Description Part Numbers SPE IP67 Jack, Push Pull Lock, PCB Right Angle Termination MSPE-J6P2-BXX SPE IP67 Jack, Push Pull Lock, PCB Vertical Termination MSPE-J6P2-EXX SPE IP67 Jack, Push Pull Lock, Solder Cup Termination, Without Functional Boardlock MSPE-J6P2-M02 SPE IP67 Plug, Push Pull Lock, Solder Pad, 28 to 18 AWG MSPE-P6P2-2YY SPE IP67 Plug, Push Pull Lock, IDC, 26/7 to 25/7 AWG MSPE-P6P2-4YY SPE IP67 Plug, Push Pull Lock, IDC, 28/7 to 26/7 AWG MSPE-P6P2-8YY SPE IP67 Cable Assembly, IP67 Plug on one end and Pigtail on other end MSPE-C6P2-AZZ10 SPE IP67 Cable Assembly, IP67 Plug on both ends MSPE-C6P2-BZZ10 XX Type 00 With Board Lock 02 Without Board Lock YY Type 30 3.5 [.138] TO 4.4 [.173] Cable Jacket Dia. (1 Grommet Supplied) 60 4.5 [.177] TO 5.4 [.213] Cable Jacket Dia. (1 Grommet Supplied) 70 5.5 [.216] TO 6.4 [.252] Cable Jacket Dia. (1 Grommet Supplied) A0 3.5 [.138] TO 6.4 [.252] Cable Jacket Dia. (Three Grommets Supplied) ZZ – Cable Length 20 to 99 - Cable length in cm (e.g. 50 = 0.5m) A0 to A9 - Cable length 1 meter + 0 to 9 decimeters (e.g. A3=1.3m) B0 to B9 - Cable length 2 meters + 0 to 9 decimeters C0 to C9 - Cable length 3 meters + 0 to 9 decimeters D0 to D9 - Cable length 4 meters + 0 to 9 decimeters E0 to E9 - Cable length 5 meters + 0 to 9 decimeters F0 to F9 - Cable length 6 meters + 0 to 9 decimeters G0 to G9 - Cable length 7 meters + 0 to 9 decimeters H0 to H9 - Cable length 8 meters + 0 to 9 decimeters J0 to J9 - Cable length 9 meters + 0 to 9 decimeters K0 to K9 - Cable length 10 meters + 0 to 9 meters (e.g. K5=15m) L0 to L9 - Cable length 20 meters + 0 to 9 meters CMIOSPEIP670422EA4 M0 to M9 - Cable length 30 meters + 0 to 9 decimeters (e.g. M7=100m) www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice.