MUSBAA1130

MUSB Rugged USB Product Specification S6046C Rev 1.2 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. MUSB-C111-30 SERIES A, RIGHT ANGLE, STACKED MUSB-A511-00 SERIES A, VERTICAL MUSB-D111-30 SERIES B, RIGHT ANGLE Related Products With matching USB MUSB-B151-34 SERIES MINI-B, RIGHT ANGLE MUSB-E151-04 SERIES MINI-AB, RIGHT ANGLE MUSB-K152-X0 SERIES MICRO-AB, RIGHT ANGLE With Cable Header Overview This Product Specification defines the general use and performance parameters for Amphenol’s MUSB series of connector. With Terminal Block Availability: Series A (single & stacked), series B, series Mini-B, series Mini-AB, series Micro-AB with right angle and vertical PCB tails. Right angle connectors mounted on a PCB with matching USB, cable headers or terminal blocks are available for all series. Dust covers for enhanced mating area protection are also available. Usage With PCB for wiring These connectors meet Military shock & vibration levels and IP67 per IEC 60529 in mated and unmated conditions. The connector system is designed to provide a standard USB interface for enclosures exposed to harsh environments. Connectors mate with any standard USB 2.0 plug. Achieves data rates up to 480 Mb/s (USB 2.0). Applications Intended for use in applications such as:  Medical equipment  Microwave transmitters  GPS, positioning equipment  Military vehicles, radios, computers Revision date: July 13, 2015    Test equipment Mobile entertainment systems Traffic control & monitoring systems Page 1 of 3 S6046C Rev 1.2 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Connector Electrical Characteristics Parameter Current rating: Contact resistance: Insulation resistance: DWV: Series A & B 1.5A per contact 30 mΩ max 1000 MΩ min 500V AC @ sea level Series Mini-B & Mini-AB 1.0A per contact 50 mΩ max 100 MΩ min 100V AC @ sea level Series Micro-AB Up to 1.8A per contact (see dwg) 30 mΩ max 100 MΩ min 100V AC @ sea level Connector Mechanical Characteristics Thermal Shock: 5 cycles @ -40° to +125° C Physical Shock: Per EIA364-27 Condition H (11ms 30G) Humidity: Per EIA364-31 Condition C, method III Vibration: Per EIA364-28 per Condition V, Letter A Salt spray: Per EIA364-26, 250 Hrs Related Products Process Characteristics MDB Recommended soldering process: Hand or wave soldering peaked at 260°C for 8 seconds max. Recommended Torque for #4-40 or M3 Panel Mount Screws: 0.45 to 0.65 Nm (4 – 5.75 in-lbs). Recommended Torque for #2-56 or M2.5 Panel Mount Screws: 0.23 to 0.34 Nm (2 - 3 in-lbs). Solder tails suitable for PCB thickness of 1.52mm (.062”) Mating Cycles: 1500 (Series A & B) 5000 (Series Mini-B & Mini-AB) 10000 (Series Micro-AB) 9 POSITION CONNECTOR SHOWN MRJ Material Requirements MUSB connectors are RoHS compliant. Unless otherwise specified, the materials for each component shall be:  Contacts: Phosphor Bronze with 30µ” (0.76µm) min Gold over 50µ” (1.27µm) min Nickel  Housing: Engineering thermoplastic, UL94V-0 rated, Black. White for series B.  Shell: Die cast Zinc alloy, Nickel plating Temperature rise: Meets the requirement of 30° C ΔT Operating temperature -40° to +105° C Available Documents MRJ-5480-01 SHOWN VERTICAL, PCB TAIL, 8 POSITION RJ45 Drawing Numbers: P-MUSB-A211-XX MUSB rugged Series A, Right Angle, on PCB with R/A cable header. Thread & Dust cover option P-MUSB-A511-XX MUSB rugged Series A, Vertical PCB mount P-MUSB-B151-XX MUSB rugged Series Mini-B, right angle PCB tail P-MUSB-CA11-XX MUSB rugged Series A, stacked, Right angle, on PCB. Thread & Dust cover options P-MUSB-D411-3X MUSB rugged Series B, Right Angle, on PCB with terminal block P-MUSB-E151-XX MUSB rugged Series Mini-AB, Right Angle PCB tail, Thread & Dust Cover options P-MUSB-K152-X0 MUSB rugged Series Micro-AB, Right Angle PCB tail, Thread options Contact factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations Quality Test Reports MRJ-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 QTR9300377 QTR9300378 QTR9300482 Series Mini-B & Mini-AB Series A & B Series Micro-AB Page 2 of 3 Copyright © Amphenol Corporation 2011 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. S6046C Rev 1.1 Product Numbering System MUSB MUSB - X X X X - X X X Rugged USB Receptacle, Generation 1 Receptacle Type Per USB 2.0 A – Standard A Series B – Mini B Series C – Standard A Series Stacked D – Standard B Series E – Mini AB Series K – Micro AB Series1 Termination Style 1 – Right Angle 2 – Right Angle on PCB with Right Angle Cable Header2 3 – Right Angle on PCB with Right Angle Matching USB Type Connector2 4 – Right Angle on PCB with Terminal Blocks2 5 – Vertical2 8 – Right Angle on PCB with Vertical Cable Header3 A – Right Angle on PCB with Holes for Wiring (Style 3 PCB)2, 4 B – Right Angle on PCB with Vertical Single Row Isolated Header5 D – Right Angle on PCB with Vertical Dual Row Isolated Header6 E – Right Angle on PCB with Vertical Matching USB Type Connector7 Number of Contacts 1 - Standard 4 per Port for Types A, C & D 5 - Standard 5 per Port for Types B, E & K Insulator Housing Colour 1 – Black for Types A, B, C & E, White for Type D 2 – Grey for Type K Rear Shield and Thread Options8, 9 0 – No Rear Shield, Unified Thread 3 – With Rear Shield, Unified Thread M – With Rear Shield, Metric Thread N – No Rear Shield, Metric Thread Dust Cover Options10 0 – With No Dust Cover11 1 – With Grey Dust Cover 5 – With Black Dust Cover Unique Special Code12 No Digit – Standard part defined by previous 10 digits 1 to 9 – Unique special feature Notes 1) 2) 3) 4) 5) 6) 7) 8) Receptacle type K (Micro AB) is a generation 2 epoxy free design. It is currently available in right angle only. Consult with Amphenol for the availability of the vertical version. Termination styles 2, 3, 4, 5 & A are currently available for receptacle types A, B, C, D & E only. Termination style 8 is currently available for receptacle types A, C & D only. Termination style A uses the pcb from termination style 3. Termination style B is currently available for receptacle types A & D only. Termination style D is currently available for receptacle type C only. Termination style E is currently available for receptacle types A & C only. Rear shields are optional for receptacle types B & E (Mini B & Mini AB) with right angle termination style. Rear shields are required for all other types with right angle terminations. Rear shields are not available for vertical termination style. Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 9) For receptacle types A, C & D (Standard A & B Series), the unified thread is #4-40UNC and the metric thread is M3x0.5. For receptacle types B, E & K (Mini B, Mini AB & Micro AB), the unified thread is #2-56UNC and the metric thread is M2.5x0.45. 10) When dust covers are supplied with the connector, they are not installed. They are supplied in bulk inside each package of connectors. For receptacle type C (Standard A Series Stacked), two dust covers are supplied per connector. 11) For receptacle types B & E (Mini B & Mini AB), dust cover code 4 is frequently used. Code 4 connectors are identical to code 0. For example, part number MUSB-B151-34 is identical to MUSB-B151-30. 12) Consult with Amphenol for additional termination styles, solder cup contacts, mounting styles, conductive gaskets or other requirements of interest. See catalogue Accessories pages for dust cover options. Page 3 of 3 Copyright © Amphenol Corporation 2011 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.