N15TS-103A3030

N-15 15mm Carbon Position Sensor/ Potentiometer FEATURES Conceived and designed for easy customisation. SMD or Through-hole Mount. Endless Rotation (360º). Wide Electrical Angle (340º 10º). Extended Mechanical Life (100k cycles). Working Temperature Range (-40ºC to +120ºC). Low Profile (4.4 mm). Linearity 3% (standard). Embossed Tape or Bulk packaging. Reflow Soldering capability. Shaft insertable from both sides. Polarised "T" rotor (European Home Appliance standard). All PT/ PTC 15 shafts compatible. IP54 protection according to IEC 60529. TYPICAL APPLICATIONS STANDARD SPECIFICATIONS Resistance values*: The N15 series offers an SMD and Through Hole mount 5k to 100k solution for the majority of Position/Rotary Sensor and 30% Tolerance: Nominal Power: multi-purpose Control applications such as: 0.15 W @ 50ºC Linearity (absolute): 3% - Automotive HVAC, Seat, Rear-view mirror actuator Taper: Linear Mechanical Life**: 100K cycles Temperature Range: -40ºC to +120ºC Mechanical Angle: 360º Electrical Angle: 340º Rotational Torque: Max. Voltage: feedback sensors and HVAC Controls -Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers... 10º - Timer & Function/Programme Select for Washing 20 mN.m Machines, Dishwashers and all White Goods in general. - Size and Position detectors 250 VDC * Others check availability ** 200K cycles version available check availability. For higher mechanical life see the Z15 product. HOW TO ORDER N15 T Series Rotors N-15 T (See note 1) S - Mounting Method 502 A 3030 Value Taper Tolerance A = Lin. 3030 = S = SMD 502 = 5 K . . H = Horizontal Adjust 104 = 100 K (See note 4) (See note 5) V =Through Hole (See note 2) NOTES: (1) (2) (3) (4) (5) A wide variety of custom substrates available Availability of a wide range of customised tapers and step curves Optional precision laser-trimmed voltage divider calibration Horizontal adjust versions will be studied case by case Value Example: Code: 5K 50 2 Numb of zeros First two digits of the value. Shafts are not available mounted to the potentiometer and should be ordered separately NOTE: The information contained here should be used for reference purposes only. www.piher.net -9- 30% (See note 3) STANDARD WIPER POSITION HOW TO ORDER CUSTOM DRAWING Wiper positioned at 50 % of the electrical angle. N-15 T S + DRAWING NUMBER 50% ±10° (Max. 16 digits) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. SMD MOUNT SOLDER FOOT - PRINT E A = Initial S Recommended PCB hole diameter when using listed Piher shafts S = Wiper E = Final A THROUGH HOLE MOUNT (WITHOUT SOLDER MASK) SOLDER MASK PCB HOLE LAYOUT 2 PCB HOLE LAYOUT 1 E A = Initial S S = Wiper E = Final A Recommended PCB hole diameter when using listed Piher shafts www.piher.net -10- HORIZONTAL ADJUST - VERTICAL MOUNT TESTS TYPICAL VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50 o C; 0.15 W 40 % MECHANICAL LIFE (CYCLES) 100,000 @ 20 CPM 40 % (Rn < 100 K ) TEMPERATURE COEFFICIENT –40 o C to +120 o C 300 ppm (Rn