N6L25T3N-103-3030

N-6 6 mm Carbon Potentiometer FEATURES - RoHS compliant materials. - Carbon resistive element. - Plastic substrate. - Over-moulding manufacturing technique. - SMD or through hole. - Embossed Tape (for SMD),Tape on reel, Ammopack and Magazine packaging for automatic insertion and bulk for manual assembly. - Wiper positioned at 50%. - Both sides cross slot easy adjustment. - Accidental rotor movement protected. - Traceability insured through date code marking. - Assembly method: stand up and lay down. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Mechanical rotation angle: 280° ± 10° – Electrical rotation angle: 245° ± 25° – Torque: 0.2 to 3 Ncm. (0.28 to 4.2 in-oz) – Max. Voltage: 100 VDC – Stop torque: > 7.5 Ncm. ( 10.5 in-oz) – Nominal Power 50°C (122°F) (see power rating curve): 0.1W – Range of values* ± 30% – Tolerance*: – Taper: linear – End resistance: – Equivalent noise resistance: * Others check availability. Rn – Operating temperature** : -25°C + 70°C (-13°F + 158°F) ** Up to 85°C depending on application. HOW TO ORDER N - N6 L 3 0 T 0 Series Mounting method Terminal style Packaging S = Stand up L = Lay down 25 = 2.5 mm. 30 = 3.0 mm. 50 = 5.0 mm. (See note 1) T0 = Bulk T1 = Reel T2 = Reel T3 = Ammopack T4 = Ammopack T5 = Magazine T6 = Magazine 1 0 2 Crimping 3030 = ± 30% 2020= ± 20% 1010 = ± 10% N = Not crimped C = Crimped (See note 5) (See note 3) (See note 2) (See N6R datasheet at www.piher.net) (See note 6) (See note 4) (1) - Type "N-6 S" is only available with terminal style "25". - Terminal style "50" is only available with bulk packing "T0", “T1”, “T3”, "T5", "T6", "T7", “T8” (2) - RoHS reflowable Value Sealed for vacuum pickup T7 = Embossed Tape T8 = Embossed Tape...Sealed for vacuum pickup NOTES: 3030 Tolerance S = SMD A = 20 A = 21.5 A = 20 A = 21.5 - Sticker Delivery for "T2" and "T4" only available in: N-6 S 25 and N-6 L 30 "T5", "T6", “T7” and "T8" only available in SMD. " T7", “T8” Embossed Tape 750 Units per Reel. Diameter: 330 mm, aprox. thickness: 30 mm. " T6" and “T8” are sealed for vacuum pickup (sticker at the bottom side) (3) - Crimped terminals are only available in bulk packing "T0". - Type "S" is only available in N-6 L 50 T0, N-6 L 50 T5, N-6 L 50 T6, N-6 L 50 T7, N-6 L 50 T8 (4) Value: Example: Code: 10 2 = 1K Number of zeros First two digits of the value. (5) - Default tolerance is ± 30%. For ±10%, ±20% and others: check availability. (6) - Option R: black housing & rotor colour. Range of values: 250 This project has been financially supported by the Spanish Technological Development Institute ( C D T I ) . www.piher.net 1 500K (see separate datasheet “N6R” at www.piher.net) MOUNTING METHOD Type S Type L 3.8 0.9 0.8 0.3 5 +0.5 2.15 + 0.07 0.9 4.2 0.9 0.5 0.8 3.7 5 8.7 4.2 0.8 0.9 6.4 5.2 3.7 2.8 +0.5 5.2 2.5 3.8 6.4 2.8 + 0.05 7.6 + 0 .1 -0.2 +0.5 2.5 Terminals Side 5 +0.5 Collector Side Top Bottom TAPE Measured at central pin length (from center width to center width of the leads) +1 PCB Hole Layout 12.7 1.3 5 C + 0.3 3.85 + 0.7 + 0.05 5 + 1.3 6.35 +1 0.5 18 9 + 0.5 2 MAX +0.1 0 = = 6 + 0.5 A + 0.5 B +1 +0.5 2.5 2.5 1 + 0.05 +0.5 0.4 +0.1 0 4 + 0.3 12.7 Measured at central pin length (from center width to center width of the leads) 12.7 MODEL A B C N-6 S 25 T1 / T3 20 28.7 17 N-6 S 25 T2 / T4 21.5 30.2 18.5 + 0.3 +1 PCB Hole Layout 1.3 + 0.7 = = 6 + 0.5 3.85 20 5 + 0.05 6.35 18 +1 0.5 + 0.5 9 2 MAX 17 + 0.5 27.6 0.4 + 0.5 + 0.3 +1 5 +0.1 0 2.5 2.5 1 + 0.05 +0.5 +0.1 0 + 1.3 N-6 L 25 T1 / T3 12.7 4 + 0.3 Measured at central pin length (from center width to center width of the leads) 12.7 + 0.3 +1 PCB Hole Layout 1.3 = = 5 + 0.05 18 +1 0.5 + 0.5 9 6.35 + 1.3 12.7 www.piher.net +0.1 0 3.0 + 0.7 6 3.85 A B C + 0.5 2 MAX + 0.5 0.4 + 0.5 + 0.3 +1 5 1 + 0.05 +0.5 3 +0.1 0 4 + 0.3 2 + 0.3 MODEL A B C N-6 L 30 T1 / T3 20 27.6 17 N-6 L 30 T2 / T4 21.5 29.1 18.5 0.5 +0.5 +0.5 ±0.07 2.15 2.5 3.7 1 5 +0.1 8.7 5 +0.05 0.5 +0.5 0.8 + 0.1 –0 2.5 3.2 ±0.05 +0.5 +0.1 –0.2 = = 1.5 0.3 ±0.07 5 ±0.05 + 0.1 0 5 1 = = +0.5 5 5 0.8 –0.2 +0.05 3.8 3.8 + 0.1 0 2 = = 5 1.3 2.4 5.2 +0.05 2.5 1.5 7.6 0.5 2.4 5.2 2 2.5 2.9 0.3 ±0.05 0.5 + 0.1 0 1.3 5 PCB Hole Layout 0.8 7.6 PCB Hole Layout 0.8 8.7 2.8 2.8 6.4 6.4 BULK TYPE L 0.9 0.9 0.9 0.9 4.2 N-6 L 50 T0 C 4.2 N-6 L 25 T0 C PCB Hole Layout 8.7 6.4 + 0.1 0 9.1 3.8 6.2 5.2 +0.05 + 0.1 0 0.5 +0.5 +0.5 3 1 5 1.85 1 +0.05 3 3.95 = = +0.05 3 3 3.6 1.5 + 0.05 5 0.3 0.3 1 3.7 PCB Hole Layout 3.1 7.6 5.2 1.3 6.4 2.6 +0.4 0.8 10.7 2.15 2.8 N-6 L 30 T0 N BULK TYPE S 6.4 5.2 3.8 PCB Hole Layout 2.8 0.9 0.5 +0.05 N-6 L 50 T0 S CRIMPING DETAIL "C" = = 2 1.4 5 2.5 Type S Type L ±0.05 8.7 5.2 N-6 S 25 T0 C +0.5 +0.5 5 8.7 5.2 +0.1 +0.1 0 2.5 5 ±0.05 0.8 – 0 . 2 +0.1 0 1 8.7 5 4.2 3.7 0.8 0.9 1.3 0.3 ±0.07 0.5 KNOB SHAFT Ref.: 5680 Ref.: 6133 Please order both Knob and Shaft separately. If you wish to use your own custom plastic shaft/knob/actuator please contact Piher for advice about compatible materials. 0.3 0.3 + 0.05 2.5 3 +0.5 0.50 12 4.20 9.50 5 2.20 + 0.05 +0.5 1.50 5.50 1.2 1.87 5.80 CRIMPING DETAIL 3.5 2 1 Ø5 Ø 4.30 0.62 Ø2.54 Ø 6.30 2.9 Ø 3.75 Ø 2.9 0.7 0.75 www.piher.net 2.45 8.7 3 PACKAGING 42 T0 BULK 500 Units per box. 36 T1 / T2 TAPE ON REEL 0 52 86 53 5 185 Units per Reel according to type: S: 1.000 L: 750 T5 / T6 MAGAZINE 260 T3 / T4 AMMOPACK Units per magazine: 80 Units per Box according to type. S: 1.000 L: 750 7.3 48 338 12.7 29 330 T7 / T8 EMBOSSED TAPE A Units per reel: 750 A LABEL 12 6.6 1.75 4 24 12.2 1.5 DIRECTION OF UNREELING AVAILABLE COMBINATIONS TAPE T1 T2 T3 T4 N-6 S 25 N-6 L 25 N-6 L 30 N-6 L 50 www.piher.net 4 MAGAZINE EMB. T5 T7/T8 T6 BULK SMD CRIMP TESTS TYPICAL VARIATIONS POWER RATING CURVE W (%) ELECTRICAL LIFE 1.000 h. @ 50°C: 0.1 W MECHANICAL LIFE (CYCLES) 100 @ 10 CPM ...15 CPM TEMPERATURE COEFFICIENT –25°C; +70°C THERMAL CYCLING 16 h. @ 85°C; 2h. @ –25°C DAMP HEAT 500 h. @ 40°C @ 95% HR VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 100 % 40 % °C 50° 70° NOTE: Out of range values may not comply with these results. RECOMMENDED CONNECTIONS POSITIONING This mark in the rotor shows the wiper´s position. VCC Positioning (PM) 50% ±20° E Piher potentiometer’s recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. (example of 50% of the travel) Ground. RL 100 x R Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. All Piher products can be adapted to meet customer´s requirements. Please always use the latest updated datasheets published at our website www.piher.net. i n g t o E LV 3 / E C) / R 0/5 oH U Pb o rd cc BUREAU VERITAS Certification 00 ) ISO 14001 ( 20 1 5 / 8 6 3 / E IATF S3 (2 Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. A v060317 www.piher.net 5