Natural Gas Module
Datasheet
RS232 communication
In addition to visual and audible communication the
module allows to monitor the operation using RS232
terminals. Each 21 seconds the module transmits the
measurements data.
The RS232 communication channel also provides
means to calibrate the sensor.
Transmission parameters
Baud rate
115200bps
Parity
8N1
Description
TECHNICAL PARAMETERS
The Natural gas module is a battery operated
detection device designed for detection of natural gas
(methane) in concentrations below 100% LEL (4.4%
CH4 in air). The sensor is not suitable for measuring
propane and butane.
The sensor is equipped with test button as well as an
audible alarm option realized with embedded buzzer.
The heart of the device is an MP-7227 MEMS
pellistor sensor which allows for low power operation
on standard AA type batteries.
The module is equipped with visual (LED) and
audible (buzzer) alarms to inform of potential gas
leakage as well as transmit data related to actual
state of the module and concentration of gas if the
module is connected to external receiver working
with serial RS232 standard.
The estimated maintenance-free operation on 2xAA
(2600mAh) batteries is 6 months.
Detectable gases
Maximum concentration
Sensor sensitivity
Sensor response time
Zero drift
Sensitivity drift
Power supply
Suggested batteries
Operating current
Transmission
Weight
Dimensions [w x l x h]
methane
5% v/v.
>10 mV/% CH4
很抱歉,暂时无法提供与“NGM-1”相匹配的价格&库存,您可以联系我们找货
免费人工找货