NPI-19B-100AV

NPI-19 Series Medium Pressure Sensors Applications Features • Process control systems • Solid state, high reliability • Hydraulic systems and valves • 316L stainless steel, ISO sensor design • Biomedical instruments • ±0.5% static accuracy • Refrigeration and HVAC controls • Temperature compensated 32°F to 158°F (0°C to 70°C) • Appliances and consumer electronics • Ship and marine systems • High sensitivity, 100 mV FSO with 1.0 mA excitation • Aircraft and avionic systems • Linearity 0.1% FSO typical • Four standard ranges: 0 to 15 psig (0 to 1 bar), 0 to 250 psig (0 to 17 bar) available in gauge or absolute • Voltage driven ranges: 15, 30, 50, 100, 200 and 300 psi (1, 2, 3, 7, 14 and 20 bar) gauge and absolute • Standard configurations include: _ 1/2 in-20 UNF threaded male port with 1.0 in (25 mm) flange _ 0.74 in (18.8 mm) diameter x 0.28 in (7 mm) long cylinder with o-ring seals _ 1/4 in-18 NPT male port with 7/8 in (22 mm) flange _ 1/8 in-27 NPT male port with 7/8 in (22 mm) flange Amphenol Advanced Sensors • Custom configurations and other pressure ranges available. Please consult the factory. NPI-19 Series Specifications Current Driven Medium Pressure, Media Isolated Pressure Sensor The NovaSensor NPI Series incorporates state-ofthe-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body. As with all NovaSensor silicon sensors, the NPI Series employs SenStable® processing technology, providing excellent output stability. A -Out The modular design allows for R1 a variety of pressure port modules, which are hermetically weldedD to the +In and sensor header module. Standard types A, B, H, 4 J are shown inside. R2 For compensation of temperature effects, a B complete resistor network is supplied on a hybrid +Out 5 ceramic design minimizes 3 substrate. The IsoSensor temperature errors to provide a maximum offset R5 error of 0.75% FSO over the 32°F to 158°F (0°C to C R3 2 1 70°C) compensated range. -In R4 A A -Out R1 -Out R1 D D +In +In 4 4 R6 R2 R2 B 5 3 B +Out R5 2 1 R3 +Out 5 3 R5 C -In 2 1 C R3 R7 R4 NPI-19 Series Constant Current schematic diagram R4 NPI-19 Series Constant Voltage schematic diagram -In NPI-19 Series Specifications Parameter Value Notes Pressure Range NPI 19 NPI-19VC Maximum Overpressure 0 to 100 kPa 0 to 200 kPa 0 to 700 kPa 0 to 1700 kPa 0 to 15 psi (0 to 1 bar) 0 to 30 psi (0 to 2.07 bar) 0 to 100 psi (0 to 6.89 bar) 0 to 250 psi (0 to 17.24 bar) 0 to 103.4 kPa 0 to 206.8 kPa 0 to 344.7 kPa 0 to 689.4 kPa 0 to 1379 kPa 0 to 2068 kPa 0 to 15 psi (0 to 1 bar) 0 to 30 psi (0 to 2.07 bar) 0 to 50 psi (0 to 3.44 bar) 0 to 100 psi (0 to 6.89 bar) 0 to 200 psi (0 to 14 bar) 0 to 300 psi (0 to 21 bar) 2x rated pressure 1.0 mA 10 VDC 108 Ω 4,000 Ω 4,000 Ω 5,000 Ω 5,000 Ω 1.5mA maximum 1.5 VDC maximum @50 VDC ± 20% ± 20% ± 20% Environmental Temperature Range Operating(6) Compensation Shock Life (Dynamic Pressure Cycle) -40°F to 257°F 32°F to 158°F 10 gRMs 100 g 1 x 106 Cycles (-40°C to 125°C) (0°C to 70°C) 20 to 2000 Hz 11 milliseconds Min. Typical Max. Notes Offset mV -2 1 2 mV FSO Output NPI-19 NPI-19VC mV mV 70 99 100 100 130 101 2 2 Linearity %FSO -0.25 0.1 0.25 3 Hysteresis and Repeatability %FSO -0.05 0.01 0.05 -0.75 -1.0 0.2 0.2 0.75 1.0 4 4 %FSO -0.75 02 0.75 4 %FSO -0.2 0.1 0.2 Thermal Accuracy of Offset NPI-19 NPI-19VC %FSO %FSO Thermal Hysteresis 5 Short-Term Stability of Offset µV/V Short-Term Stability of FSO µV/V 5 6 Long-Term Stability of Offset %FSO 0.1 7 Long-Term Stability of FSO %FSO 0.1 7 6 1. Performance with offset, thermal accuracy of offset, and thermal accuracy of FSO compensation resistors. Mechanical Weight 0.02 lb (10 g) 0.1 lb (45 g) Media Compatibility All corrosive media compatible with 316 L stainless steel Case and Diaphragm Material 316L stainless steel Recommended O-Ring Type A Type B Units Thermal Accuracy of FSO Electrical @ 77°F (25°C) unless otherwise stated Input Excitation NPI-19 NPI-19VC Insulation Resistance Input Impedance NPI-19 NPI-19VC Output Impedance Bridge Impedance Parameter Performance Parameters(5) Compensated(1) General(8) NPI-19A-XXX NPI-19B/H/J-XXX 0.66 in x 0.039 (16.76 mm x 1 mm) diameter 2-013 per ISO 3601/1 2. FSO with 1.0 mA input excitation, 10 VDC for NPI-19VC. 3. Linearity by best fit straight line. 4. 2°F to 158°F (0°C to 70°C) with reference to 77°F (25°C). 5. 32°F to 158°F (0 to 70°C), by design. 6. Normalized offset/bridge voltage—100 hours, typical value, not tested in production. 7. 1 year, typical value, not tested in production. 8. Consult factory for vacuum applications. Ordering Information NPI-19 Series Specifications NPI-19 NovaSensor Pressure Type (ISO Sensor) Code Pressure Port Type A No port, o-ring seal B 1/2-20 UNF H 1/4-18 NPT J 1/8-27 NPT Code Pressure Ranges 101 100 kPa, 1 mA 201 200 kPa, 1 mA 701 700 kPa, 1 mA 1700 kPa, 1mA 172 015 015 psi (1 bar), 10 V 030 30 psi (2.07 bar), 10 V 050 50 psi (3.44 bar), 10 V 100 100 psi (6.89 bar), 10 V 200 200 psi (14 bar), 10 V 300 300 psi (21 bar), 10 V Code Description A Absolute G Gauge Code Voltage H Constant Current Supply (1.0 mA) V Constant Voltage Supply (10 VDC) NPI-19 - ____ - ____ - ____ - ____ Typical model number NPI-19 Series dimensions Amphenol Advanced Sensors www.amphenol-sensors.com © 2015 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-312C-10/2015