pulseOne cable assemblies are ready-made to meet your
exacting specifications.
When longevity is required, pulseOne’s robust standard
configuration ensures durability in repeated-use applications.
Whether sterilized by EtO, or disinfected with standard
hospital cleaning agents, pulseOne continues to perform after
reprocessing.
Yet for applications best served by disposable products,
pulseOne’s “Limited Use” alternative is an ideal choice. Select
this option to get great performance at the right price.
And if intelligent solutions are needed, pulseOne’s factory
installed PCB option* allows you to program in limits to the number of uses, proper OEM identification and other ‘smart' features.
* Available soon
FEATURES & BENEFITS
Pre-molded to Cable
Performance matched cable with connector simplifies the specification process
Tactile & Audible Confirmation of Mate
Assurance that the connector is mated properly
“D” Shape Friction Fit Design
Easy to align and connect in blind mate applications. Simply pull to disconnect
Touch Proof Contacts1
1– Per IEC-60601-1
Protects against accidental touch in multiple keying options
Sealed to IP-64 and IP-672
2 – IP-67 applies to panel mount receptacle only
Keeps water and cleaning agents out of the connector when mated
Optional Active Components
Properly identify and control single use or variable device parameters
APPLICATION EXAMPLES
Surgical Devices
The “Limited Use” option is perfect for disposable electrosurgical products
Vital Sign Monitoring Devices
Simple to use and small size make pulseOne great for patient wearable products
Therapy Delivery Devices
Easily connect to electrodes for a wide array of single use applications
Phone: 508-427-7000
Fax: 508-583-0164
For additional information about pulseOne or any other product,
please contact an Amphenol Alden Product Specialist today.
www.amphenolalden.com
0517
STANDARD CONNECTOR OPTIONS
Receptacle Assemblies
• Cable Mount or Panel Mount
• 4, 7, 10, and 14 pin options
• Unshielded or Shielded
• Up to 3 keyways standard
Plug Cable Assemblies
• 4, 7, 10, and 14 pin options available
• Unshielded or Shielded
• Up to 3 keyways standard
• PCB Option (future)
Note: For custom cables, cable lengths, colors and keys available,
please consult factory
BASIC DIMENSIONS
Inches (mm)
Cable-mount plug
Cable-mount receptacle
0.50
(12.7)
1.37
(34.8)
0.58
(14.7)
0.36
(9.1)
1.37
(34.8)
0.58
(14.7)
Front panel-mount (FPM) receptacle
Rear panel-mount (RPM) receptacle
M15 x 1.0 Nut
M20 x 1.0 Nut
0.18
(4.6)
Ø 0.95
(24.0)
RPM panel cutout
FPM panel cutout
0.47
(11.9)
Ø 0.78
(19.9)
Ø 0.73
(18.6)
0.34
(8.7)
0.43
(11.0)
Pin ID View
0.30
(7.7)
0.60
(15.2)
Ø 0.60
(15.3)
Note: Cable side of the receptacle shown
0.49
(12.4)
0.40
(10.0)
0.54
(13.8)
0.60
(15.2)
PIN #8
PIN #14
PIN #7
Phone: 508-427-7000
Fax: 508-583-0164
PIN #1
For additional information about pulseOne or any other product,
please contact an Amphenol Alden Product Specialist today.
www.amphenolalden.com
0517
HOW TO ORDER / PART NUMBER
pulseOne is available in a variety of standard configurations as well as an
infinite number of custom possibilities. Standard contacts are arrayed in a
semi-circular pattern in 4, 7, 10 and 14 poles with 3 choices for keying. Each
connector is assembled and molded onto a standard cable, one meter in
length. For custom cable, shielded connectors, and plugs with programmable
PCB’s, please consult the factory.
P
Receptacle
R
N
Non-Shielded
N
Shielded
S
L
Limited Use (< 100 mating cycles) - plug only
L
Multiple Use - up to 5,000 mating cycles
M
04
4 pole
04
7 pole
07
10 pole
10
14 pole
14
B
Blue - standard
B
Gray
G
Custom Color - requires suffix
C
1
Key 1 standard
1
Key 2
2
Key 3
3
Custom Key - requires suffix
C
N
1000
- YYYY
C O N F I G U R A T I O N S
P
Plug
Standard Cable - no shield
N
Standard Cable - with shield
S
Custom Cable - requires suffix
C
Front Panel Mount (PCB tail) - no cable
E
Front Panel Mount (solder cup tail) - no cable
F
Rear Panel Mount (PCB tail) - no cable
Q
Rear Panel Mount (solder cup tail) - no cable
R
Cable Length (millimeters) XXXX
Custom
1,000 and 2,000 mm standard
Suffix to be assigned by Amphenol Alden
Phone: 508-427-7000
Fax: 508-583-0164
4 Pole
Key 1
Plug Face
7 Pole
Key 1
Plug Face
10 Pole
C I R C U I T
Mount To
Key 1
Color
Number of
Contacts
Mating
Cycles
Connector
Body
Part Number: P1
Key 1
Plug Face
14 Pole
Key 1
Plug Face
YYYY
For additional information about pulseOne or any other product,
please contact an Amphenol Alden Product Specialist today.
www.amphenolalden.com
0517
TECHNICAL SPECIFICATIONS
Mechanical
Mating Cycle Durability:
Electrical
Operating Current:
per EIA-364-26
Receptacle
> 5,000
Plug, Limited use
< 100
Plug, Multiple use
> 5,000
Operating Voltage:
per EIA-364-13
DWV – Pin to Pin:
Mating Forces (N):
Insertion:
31
Withdrawal:
23
Flex Cycles:
> 5,000 one axis
Cable shielded
> 2,500 one axis
Panel Nut Torque Spec:
1,000 VDC @ 100 microamps
leakage max per EIA-364-20
DWV – Pins to Ground: 5,000 VDC @ 100 microamps
leakage max per EIA-364-20
+/- 90 degrees
Cable unshielded
1.0A per contact, continuous duty,
≤ 30°C temperature rise, all 14
contacts energized, per EIA-36470
300 V RMS per EIA-364-20
4.5 kgf-cm
Component Materials
Standard Cable:
28AWG stranded cond. PVC
insulated, TPU jacket,
non shielded, color natural (off white)
Environmental
Mated Plug to In-line Receptacle Seal to IP-64
Mated Plug to Panel Mount Receptacle Seal to IP-67
Contacts:
Copper alloy with gold over nickel plate
Disinfect with standard hospital cleaning agents
Connector Housing:
Polyamide, color white
Sterilize with EtO
Overmolds:
TPU, color blue
THE AMPHENOL ADVANTAGE
No other interconnect manufacturer can match our special knowledge, collaborative engineering expertise, the flexibility to
quickly customize our standard product, and the power of Amphenol’s global manufacturing capabilities to serve the demands
of the global market.
Amphenol Alden is designed to be your complete interconnect resource regardless of your interconnect need. From simply
providing world-class connectors, to engineering and manufacturing the most complex final overmolded cable and electronic
accessory, only Amphenol Alden merges design engineering, product and process expertise to deliver interconnect results
that are as ergonomic and effective as they are economical.
Amphenol Alden is located in Brockton, Massachusetts, at 117 N. Main Street. Visit us on the web at
www.amphenolalden.com or call us at 508-427-7000 for more information and to discuss your specific application in detail.
Phone: 508-427-7000
Fax: 508-583-0164
For additional information about pulseOne or any other product,
please contact an Amphenol Alden Product Specialist today.
www.amphenolalden.com
0517
