P29026-M.5

A1 38.1mm [1.50"] 12-MAY-14 TECHNICAL DATA SHEET RELEASE KMM RFC LENGTH (Mxxx = METERS) 65.0mm [2.56"] 1 3/8 - 16 UN - 37.3mm [1.47"] ACROSS FLATS 44.0mm [1.73"] P1 1/2-14NPT 56.2mm [2.21"] 1 4 TECHNICAL DATA: 1) MATERIALS: HOUSING: MACHINED ALUMINUM, ANODIZED INSULATION INSERT: THERMOPLASTIC, UL 94/V-0 CONTACT: GOLD FLASH PLATING OVER COPPER ALLOY CONDUCTOR INSULATION: PVC NUMBER OF CONDUCTORS: (4) 10AWG 2 2) ELECTRICAL DATA: CURRENT (MAX): 25A VOLTAGE (MAX): 600V AC/DC INSULATION RESISTANCE (MIN): 5000M OHMS DIELECTRIC TEST VOLTAGE: 2200V 3) MECHANICAL DATA: KNOCKOUT HOLE SIZE FOR PANEL MOUNT: 22.2mm [.88"] TEMPERATURE RANGE: -40°C TO 90°C PROTECTION: IP67 (MATED CONDITION) MATING CYCLES: >500 VIBRATION RESISTANCE PER MIL-STD-202 METHOD 204 THERMAL SHOCK PER MIL-STD-202 METHOD 207 48 HOUR SALT SPRAY PER MIL-STD-202 METHOD 101 4) RoHS COMPLIANT 5) UL 2237 LISTED ASSEMBLY UL FILE NUMBERS: E339703 WIRING DIAGRAM P1 1 BLACK 10AWG 2 GREEN/YELLOW 10AWG 3 RED 10AWG 4 WHITE 10AWG 3 Risk of Electrical Shock Do Not Disconnect Under Load. Risque de chocs electriques Ne pas debrancher sous tension. WARNING DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 TOLERANCE 0-2.99 M = +100.0/-25.0mm 3-8.99 M = +150.0/-25.0mm 9-14.99 M = +300.0/-25.0mm 15-OVER M = +450.0/-25.0mm 0-9.99 FT = +4" / -1" 10.00-29.99 FT = +6" / -1" 30.00-49.99 FT = +12" / -1" 50 FT-OVER = +18" / -1" All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: NEXT ASS'Y: KMM MRF KMM RFC Amphenol DATE 12-MAY-14 12-MAY-14 12-MAY-14 ITEM Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 M35 PB LITE, 4 PIN, FEMALE RECEPTACLE TRUNK, 10 AWG, 1/2 - 14NPT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE C- FULL DWG NO: P29026-Mxxx C-P29026 SHEET REVISION 1 A1 OF 1