P30626-M15

A1 - TECHNICAL DATA SHEET RELEASE A2 - ADDED DESCRIPTION - - - 10/27/17 - - LENGTH (Mxxx = METERS) TECHNICAL DATA: 3/8" KINETIX DRIVE END 1) MATERIALS: CONNECTOR: MB2CKN0900 CHECKMATE OVERMOLD: TPE CABLE: KA-56647 DIN ONE-QUARTER TURN SINGLE CABLE PLUG 1/2" 2) ELECTRICAL: INSULATION RESISTANCE (MIN): 5000M OHMS DIELECTRIC TEST VOLTAGE: 2200V 1-5/8" ±1/16" 3) MECHANICAL: TEMPERATURE RANGE: -40°C TO 105°C PROTECTION: IP67 (MATED CONDITION) MATING CYCLES: >500 VIBRATION RESISTANCE PER MIL-STD-202 METHOD 204 1/2" 6-1/2" ±1/8" 8" ±1/8" THERMAL SHOCK PER MIL-STD-202 METHOD 207 48 HOUR SALT SPRAY PER MIL-STD-202 METHOD 101 4) CABLE SPECIFICATIONS: • NOMINAL O.D., 0.55'' (14.2MM), JACKET COLOR: ORANGE DESINA RAL 2003, JACKET MATERIAL: POLYURETHANE (PUR). A B C • Electrical Resistance at 20°C: ≤ 59,0 Ω/km (Section 0,34mm²) ≤ 19,5 Ω/km (Section 1,00mm²) ≤ 7,98 Ω/km (Section 2,50mm²) • Insulation Resistance 20°C: ≤ 500 MΩxkm • Test Voltage: 3 kVa.c. • Operating Voltage: 1000Va.c. • Capacitance 800 ÷ 1000Hz: 45 ± 15 pF/m - (2xAWG22)ST/SN (BUS) • Characteristic Impedance at 10MHz: 110 ± 10 Ω - (2xAWG22)ST/SN (BUS) • Capacitance 800 ÷ 1000Hz: ≤ 90 pF/m (Conductor/Conductor) 4x2,5mm² ≤ 150 pF/m (Conductor/Shield) 4x2,5mm² • Temperature Range: -40°C to +80°C (static, dynamic and storage) • Minimum Bending Radius: 5 x Ø (Static Use) - 7 x Ø (Dynamic Use) • Max Speed: 300 m/min • Max Acceleration: 50 m/s² • Max Torsion: ± 30°/m • Chain length: 20m • Max Number of cycles: 5,000,000 Flame Resistance: • CEI 20-35-1-2, EN 50265-1-2, IEC 60332-1-2, UL VW-1, CSA FT1 Halogen Free: • CEI 20-37, EN 50267-2-1, IEC 60754-1 Hydrocarbons and oil resistance: 4-3/4" ±1/8" B C G D D E ROCKWELL P/N AMPHENOL P/N 2090-CSBM1DF-14AAxx 2090-CSBM1DF-14AA03 2090-CSBM1DF-14AA05 2090-CSBM1DF-14AA09 2090-CSBM1DF-14AA10 2090-CSBM1DF-14AA15 2090-CSBM1DF-14AA20 P30626-Mxx P30626-M3 P30626-M5 P30626-M9 P30626-M10 P30626-M15 P30626-M20 L A F E H H FACE VIEW F G L ITEM DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED SIGNATURES Risk of Electrical Shock Do Not Disconnect Under Load. Risque de chocs electriques Ne pas debrancher sous tension. 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 CHECKED: ENGINEER: WARNING 3) Note reference = X APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: • UL1581, VDE 0472 part 803 A/B, HD 22.10 S1, CNOMO E.03.40.150N PROCESS SPECIFICATIONS: 5) RoHS COMPLIANT DO NOT SCALE DRAWING NEXT ASS'Y: DATE Amphenol DRAWN: MRF AA RO WS 10AUG15 27OCT17 Sine Systems - www.sineco.com 44724 Morley Drive Clinton Township, MI 48036 27OCT17 SINGLE MOTOR CABLE, M23 CHECKMATE, 1000V HYBRID CABLE WITH 4 POWER (14AWG), 2 FEEDBACK (DIGITAL COMMUNICATION) AND 2 BRAKE CONDUCTORS, DRIVE-END FLYING LEADS THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE CNONE DWG NO: REVISION P30626-Mxx C-P30626 SHEET A2 1 OF 1