PC16SH-10CP06-102A2020-C-TA

PC-16 16 mm Carbon Potentiometer FEATURES – – – – Carbon resistive element. IP54 protection according to IEC 60529. Polyester substrate. Modular gang type (up to 4). – Self extinguishable material UL 94-V0. – Upon request: Metalic support. Stereo matching. Switch. Nut & washer. Bushless & shaftless models. Assemblies with wires and connectors. Bushless version MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Mechanical rotation angle: 300° ± 5° – Range of values* – Electrical rotation angle: 280° ± 20° – Standard tolerance*: – Torque: 0.5 to 1.5 Ncm. (0.7 to 2.1 in-oz) – Max. Voltage: 250 VDC (lin) 125 VDC (no lin) – Stop torque: > 40 Ncm. ( >56 in-oz) – Max. torque nut (binding out): < 80 Ncm. (112 in-oz) – Thrust and pull in the shaft: > 25 N ± 20% ± 30% – Nominal Power 50°C (122°F) (see power rating curve) 0.2 W (lin) 0.1 W (no lin) – Taper* Lin ; Log; Alog (Log. & Alog. only Rn 5 – Residual resistance*: 1K). 5 – Equivalent Noise Resistance: * Others check availability. ** Up to 85°C depending on application. – Operating temperature**: –25°C + 70°C (–13°F + 158°F) HOW TO ORDER OPTIONAL EXTRAS PC-16 D H 10 I M06 Serie Mounting style Terminals PC-16 H= Horizontal V = Vertical I = PCB C = Solder Lugs 203 A D =Tandem T =Triple C =Quad. Bushing diameter 07 = M7 10 = M10 SC = Bushless (See note 2) Mounting brackets Switch M1 I = PCB 1010 = ± 10% M2 C = Solder lugs (See note 7) (See note 9) 3030 = ± 30% M04 M06 M07 M11 (See note 4) Stereo matching (See note 5) Taper Shafts spec. leng. 3D = 3dB 4D = 4dB 6D = 6dB A = Linear B = Log. C = Alog. XX.X (See note 8) M17 P01 P23 --- (See notes 6,9) (See note 10) Others tapers on request (See note 3) NOTES: Tolerance 2020 = ± 20% Shafts S =Single 0 0505 = ± 5% Value (See note 1) Model 2020 Nuts & Washers -TA = loose nut & washer MTA=assembled nut & washer -T- = loose nut MT- = assembled nut (See note 9) (1) Mounting style: Type "V" is only available in model "S" potentiometer and with printed circuit terminals. (2) B u s h i n g s : Type "10" has two paralell flat surfaces for avoiding rotation. Bushless option only available for single model. (3) M07 shaft is only available with M10 bushing. --- = no shaft (4) Value: Code: 10 1 Number of zeros 2 first digits of the value. In models "D", "T", "C", with different values, they will be asked by drawings. (5) Tolerance (non standard), upon request. Example: +7% Code: 07 05 -5% negative tolerance positive tolerance (6) Shaft special length: Only for special length and plain shafts (not knurled). Example: Shaft Ø6.35 L= 24.5 M07 ..... 24.5 special length NOTE: Maximun length recommended: L = 45 shafts (7) Mounting brackets: Only applicable for model "S", mounting "H" and without switch. (8) Stereo matching: not available for single models. Maximun will be: (9) Not available for Bushless version. (10) Switch option not available with antilog taper. www.piher.net 69 3dB for model "D" 4dB for model "T" 6dB for model "C" STANDARD OPTIONS HOW TO ORDER CUSTOM DRAWING Shaft length .................................. 0 Standard Length Mounting brackets ........................ Without mounting brackets Stereo matching ........................... Only on request (see note 8) Switch ........................................... No switch Nut & washer ................................ Without nut and washer PC-16 S V + DRAWING NUMBER (Max. 16 digits) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. MODELS 1.1 -0.1 M10 x 0.75 A + 45 0.5 16 A = Initial S = Wiper E = Final 7.5 7.5 7.5 5 6.5 8.8 4.6 9 8 + 30.5 0.5 A 8 8.8 6 8 PIHER 9 + 45 0.5 S 15 E 12.5 M10 x 0.75 6 E S 18 7.5 7.5 7.5 4 6.5 8 5 5 +0.1 15 1.3 16 5 Mounting surface 1.3 D T C 5 S +0.1 10 PC-16 S/D/T/C..H... PC-16 SV . . . . . . . . . METALLIC SUPPORT 6.5 2.5 7.5 6.5 20 10 20 1.1-0.1 4 4 1 -0.1 M10 x 0.75 9 9 + 45 0.5 6.5 7.5 Mounting surface 1.3 +0.1 10 Mounting surface 20 2.5 5 5 6.5 16 8 20 16 8 5 5 + 45 0.5 1.3 8.8 12.5 8 6 8.8 8 6 12.5 M10 x 0.75 +0.1 PC-16 SH....M2 PC-16 SH......M1 BUSHINGS 8 8 M7 x 0.75 M10 x 0.75 16 4 4 18 8.8 0.6 16 18 0.6 8 9 16 16 16 07 17 10 EXAMPLES OF BUSHLESS VERSION 3.1 7.5 www.piher.net 16 16 7.5 70 7.5 18 4.03 thickness = 0.5 16 15 4.6 4.03 18 15 3.1 18 4.03 3.1 TERMINALS 16 2.4 I NUTS & WASHERS POWER RATING CURVE Standard Bushing 10 A = Linear B = Log. C = Alog. 12.5 1.1 -0.1 C TAPERS 16 8 Hole for wiring 18 2.4 -0.05 4 +0.1 16 Hole for heat dissipation (do not solder) 18 4 Hole for heat dissipation (do not solder) Bushing 07 W (%) 2.5 2.5 14 10 100 100 % C 80 A 60 40 0.5 0.5 40 % B 16 20 A E 0 25 M7 x 0.75 M10 x 0.75 50 75 10.3 10.3 C 50 100 70 7.2 NOTE = Please note relative terminal positions when ordering non linear tapers. TESTS TYPICAL VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50°C; 0.2 W ±5 % MECHANICAL LIFE : POT.* SWITCH 25.000 (10-15 CPM) 10.000 (1 A, 50 VAC) ±3 % (Rn < 1 M TEMPERATURE COEFFICIENT –25°C; +70°C ±300 ppm/ O C (Rn < 100 K THERMAL CYCLING 16 h. @ 85°C; 2h. @ –25°C ±2.5 % DAMP HEAT 500 h. @ 40°C @ 95% HR ±5 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. ±2 % ) ) (*) only applicable to values 1K. For lower values please consult. SWITCH SWITCH PCB TERMINAL 1.1 -0.1 5 15 -0.2 4 6.5 M10 x 0.75 9 + 45 0.5 8 9 16 +0.2 13.6 5 8.8 10 10 6 8.8 8 6 5 12.5 M10 x 0.75 + 45 0.5 16 16 SOLDER LUG TERMINAL 5 5 +0.1 20 5 1.3 5 Mounting surface 6.5 5 1.3 10 PC-16S . . . H . . . . . . . I / C www.piher.net +0.1 71 PC-16SV . . . I SWITCH SPECIFICATIONS NOMINAL CURRENT CONTACT RESISTANCE (initial) OPERATING TORQUE OPERATING ANGLE TEST VOLTAGE PACKAGING Boxes of 100 pieces (single body model): Inner dimensions 250 x 160 x 95 mm METALIC SHAFTS STANDARD A 45 M04 6 45 M06 6.35 45 M07 +0.5 CODE L A B C L A 2 5 7 15 M11 2 10 11 20 M12 4 12 14 25 M13 4 12 14 30 M14 4 12 14 35 M15 4 12 14 40 M16 4 12 14 45 M17 6 1 B CODE 4 A L L C SPECIAL 4 A A A 6 L +0.5 L +0.5 6.35 3.1 PLASTIC SHAFTS Ø 3.1 9 + 15 0.5 P09 PLASTIC SHAFTS Ø 4 16 4 www.piher.net 9 57 P01 40 o 40 o 9 + 64 0.5 15 3. 15 3. 16 +0.5 4 P02 72 PLASTIC SHAFTS Ø 4 15 4 4 o 35 3 9 9 5 + 45 0.5 9 30 o + 17 0.5 4 P07 P08 o 3.7 3 o 60 71 2.8 P04 8 3 + 20 0.5 9 4 9 4 +0.5 12.7 + 17 0.5 P21 P10 PLASTIC SHAFTS Ø 6 Shaft position shown full CCW. Any other position for plastic shafts has to be shiftted n times 24°. Other positions upon request. 1 9 6.25 31,5 22 9 9 o + 35.5 0.5 + 45 0.5 6 6 P05 30 + 20 0.5 P06 P11 4.6 6 4.6 7o 6 4.6 12 9 12 o 60 + 21.5 0.5 15 9 + 32 0.5 9 6 P12 P13 P14 8.5 4.6 12 9 9 6 + 25 0.5 o 15 + 27.5 0.5 21.5 9 6 +0.5 P15 19 6 ±0.5 P16 P17 30° 6 8 9 18.5 +0.5 9 +0.5 16 4 11.5 P18 9 6 o P22 www.piher.net 6 9 19 30 +0.5 73 6 P20 18 teeth knurl & arrow shape shaft P23 4 25 ±0.5 +0.5 P19 1 15.5 1 9 6 OPEN CIRCUIT FEATURE (CUT TRACK) PCF Cut track at the end of the travel PCI Cut track at the beginning of the travel. A S E A A S E A S S E E CCW on-off (A) CW on-off (E) A = Initial S = Wiper E = Final. PCI, PCF and other configurations available upon request. Check the ordering code with Piher. RECOMMENDED CONNECTIONS VCC E Piher potentiometer’s recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. Ground. RL 100 x R Disclaimer Contact The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls SA Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. t w ww sa .p ih e r. n et r t i fi c a t e Piher is an AmphenolTM company. Ce Pb Note: Piher products can be adapted to meet customer’s requirements. Due to continuous process improvement, specifications are subject to change without notice. v240919 www.piher.net 74 Polígono Industrial Municipal Vial T2, 22, 31500 Tudela - Spain. t. +34-948-820450 f. +34-948-824050 sales@piher.net www.piher.net