PCC420AR-10-R6

RMS and peak acceleration loop powered sensors PCC420A series Wilcoxon’s PCC420A series sensors provide a 4-20 mA output proportional to vibration, allowing for continuous trending of overall machine vibration. This trend data alerts users to changing machine conditions and helps guide maintenance in prioritizing the need for service. The choice of RMS or peak output allows you to choose the sensor that best fits your requirements. Key features Table 1: PCC420Ax-yy-C model selection guide x (4-20 mA output type) yy (4-20 mA full scale) R = RMS output, acceleration 05 = 5 g (49 m/sec2) 10 = 10 g (98 m/sec2) 20 = 20 g (196 m/sec2) 50 = 50 g (490 m/sec2) P = calculated peak output, acceleration C (output connector) R6 = 2 pin, MIL-C-5015 M12 = 4 pin, M12 • True RMS or calculated peak output • Connector options: 2-pin MIL-C-5015 or 4-pin M12 • Easily integrated into existing process control systems • Compact housing for applications with height restrictions • Manufactured in an approved ISO 9001 facility Certifications Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99349 Rev.A.1 05/21 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com Page 1 of 2 RMS and peak acceleration loop powered sensors PCC420A series 2 PIN SPECIFICATIONS Full scale, 20 mA, ± 5% see Table 1 on page 1 Frequency response: ± 10%  ± 3 dB 10 Hz - 1.0 kHz 1.0 Hz - 2.0 kHz 15/16" hex Repeatability ± 2% Transverse sensitivity, max 5% Power requirements, 2-wire loop power: Voltage at sensor terminals 12 - 30 VDC Loop resistance at 24 VDC, max 700 Ω Turn on time, 4-20 mA loop