PCD100-265-B-2R-0

Process and temperature meters PCD100 series The PCD100 digital panel meters are one of the most versatile on the market, and are used in a wide variety of process and temperature applications. The PCD100 can be field programmed to accept common process voltage (1-5V, ± 10V) and current (0-20 mA, 4-20 mA) inputs, 100 Ω RTDs, and the four most common thermocouples. One of the PCD100’s most useful features is its ability to provide 24 VDC to power the transmitter’s 4-20 mA signal. There are two power options: 85265 VAC or 12-36 VDC. The meter can be programmed via front panel or remotely. Front Panel NEMA 4X, IP65 Rated PCD100 series The display is four full digits, meaning it can display numbers up to 9999, an advantage over most digital panel meters. The PCD100 can display type K thermocouples to 2300°F and 4-20 mA signals up to 9,999. The meter is supplied with two alarm points that include front panel red LEDs to indicate alarm conditions, making it particularly useful for alarm applications that require visual-only indication. 12-36 VDC Options installed PCD100-265-B-N-0 PCD100-24-B-N-0 none PCD100-265-B-N-200 PCD100-265-B-2R-0 24 VDC transmitter supply PCD100-24-B-2R-0 • 4-20 mA, ±10V, TC & RTD field-selectable inputs • Options for 2 relays, isolated 4-20 mA output, and 24 VDC transmitter power supplies 2 relays • External contacts for remote button operation 2 relays + 24 VDC transmitter supply PCD100-265-B-2R-200 PCD100-265-B-420-0 • NEMA 4X, IP65 front panel • Includes PC-based programming and monitoring software Ordering information 85-265 VAC Key features PCD100-24-B-420-0 4-20 mA output PCD100-265-B-420-200 4-20 mA output + 24 VDC transmitter supply PCD100-265-B-420-240 4-20 mA output + dual 24 VDC transmitter supplies PCD100-24-B-2R420-0 PCD100-265-B-2R420-200 Certifications 2 relays + 4-20 mA output 2 relays + 4-20 mA output + 24 VDC transmitter supply Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99388 Rev.A 08/20 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 1 Process and temperature meters PCD100 series DIMENSIONS 1.76” [44.7 mm] 2.50” [63.5 mm] 2.45” [62.2 mm] 3.61” [91.7 mm] 0.59” [15.0 mm] 3.20” [81.3 mm] 3.60” [91.4 mm] 4.68” [118.9 mm] Side view Top view SPECIFICATIONS GENERAL Display 1.2” (30.5 mm) height, 4 digits, red LED Display intensity Eight levels, user-selectable Front panel NEMA 4X, IP65 (panel gasket provided) Programming methods Four front panel buttons, cloning with Copy feature, PC with MeterView software, Modbus registers Power options 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W max Required fuse UL recognized, 5 A max, slow-blow; up to 6 meters may share one fuse Isolation 4 kV input/output-to-power line; 500 V input-to-output or output to 24 VDC supplies; -2R420 models only: 100 V output-to-24 VDC supply Temperature range Operating: -40° to 65°C Storage: -40° to 85°C Relative humidity 0 to 90% non-condensing Connections Power & signal: removable screw terminal blocks accept 12 to 22 AWG Serial: RJ11 header, standard on all meters Enclosure 1/8 DIN, high impact plastic, 94V-0, color: gray Weight 269 grams (9.5 oz) (including options) Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99388 Rev.A 08/20 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 2 Process and temperature meters PCD100 series SPECIFICATIONS PROCESS INPUTS Inputs 0-20 mA, 4-20 mA, 1-5 V, ± 10V Transmitter supply P1 P1 & P2 Isolated, one or two transmitter supplies 24 VDC ± 10% @ 200 mA max (-200 models) 24 VDC ± 10% @ 200 mA and 40 mA max (-240 models) Accuracy ±0.05% FS ±1 count; square root: ±0.1% FS ± 2 counts Function linear or square root Calibration range user programmable over entire range of meter Input impedance Voltage range: >1 MΩ Current range: 50-100 Ω, varies with resettable fuse impedance Input overload protected by automatically resettable fuse Temperature drift see table 1 TEMPERATURE INPUTS Inputs Factory-calibrated, field selectable, type J, K, T, or E (see table 2) Resolution 1°; type T TC & RTD: 1° or 0.1° Cold junction reference automatic Temperature drift ± 2°C maximum Offset adjustment programmable to ±19.9° (allows user to apply an offset value to the temperature being displayed) Input impedance >100 kΩ RELAYS 2 Form C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP (=50 watts) @ 125/250 VAC for inductive loads Rating Relay operation Time delay 0 to 199 seconds, on and off delays; programmable Table 1: Temperature drift Table 2: Temperature input types Input 0 to 65°C ambient -40 to 0°C ambient Current ±0.20% FS (50 PPM/°C) ±0.80% FS Voltage ±0.02% FS (1.7 PPM/°C) ±0.06% FS Type Range Acc. (0 to 65°C) Acc. (-40 to 0°C) Resolution J -58° to 1382°F -50°C to 750°C ± 2°F ± 1°C ± 5°F ± 3°C 1° K -58° to 2300°F -50°C to 1260°C ± 2°F ± 1°C ± 4°F ± 2°C 1° T -292° to 700°F -180°C to 371°C ± 2°F ± 1°C ± 13°F ± 7°C 1° or 0.1° E -58° to 1700°F -50°C to 927°C ± 2°F ± 1°C ± 11°F ± 6°C 1° RTD -328° to 1382°F -200°C to 750°C ± 1°F ± 1°C ± 5°F ± 3°C 1° or 0.1° Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99388 Rev.A 08/20 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 3 Process and temperature meters PCD100 series SPECIFICATIONS SERIAL COMMUNICATIONS Protocol Modbus RTU Meter address PDC protocol: 0 to 99 Modbus protocol: 1 to 247 Baud rate 300 to 19,200 bps Transmit time delay Programmable, 0 to 199 ms Data 8 bit (1 start bit, 1 stop bit) Parity None (1 or 2 stop bits), even, or odd Turn around delay < 2 ms (fixed) ISOLATED 4-20 mA TRANSMITTER OUTPUT Scaling range 1.00 to 23.00 mA; reverse scaling allowed Accuracy Temperature drift ±0.1% FS ±0.004 mA 50 PPM/°C 1 Isolation 500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power line; 100 V output-to-24 VDC supply (model PCD100-265-B-2R420-200 only) External power 35 VDC maximum Output loop resistance see table 3 EXTERNAL BUTTON CONTACTS Number Four Function Remote operation of front-panel buttons Open state +5 VDC open contact on button input terminals Closed state Closed contact button input terminal to common/ground, active low 0 to 0.4 VDC Notes: 1 Analog output drift is separate from input drift. Table 3: Output loop resistance Power supply Minimum Maximum 24 VDC 10 Ω 700 Ω 35 VDC (external) 100Ω 1200 Ω Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99388 Rev.A 08/20 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 4