PCL250015

High Performance P-Clamps & Omega Clamps Other Products Luminus Series Smart Engineering VICTREX® PEEK™ Polymer Overmold Technology More details on back Engineered for lean manufacturing, the High Performance P-Clamps and Omega Clamps were developed to replace and outperform traditional P-Clamps and Saddle Clamps. Featuring an overmold silicone cushion with VICTREX PEEK polymer, our clamps are completely non-conductive/non-corrosive, lightweight, and very durable. Benefits at a Glance High Performance Standoffs Designed for Lean Manufacturing Smart Engineering  Lock open & closed feature increases ease of installation  One piece hinged design with overmolded grommet  Easily recognizable labels makes inspection easy  Uses standard 10-32 screws Flexible Options  Fuel Resistant and High Temperature resistant rubbers available  Dedicated to pressurized and unpressurized areas  Compatible with tubes up to 2” in diameter   VICTREX PEEK Polymer Overmold Technology Amphenol Pcd More details on back Smaller envelope than existing metal P-Clamps Multiple Sizes Available  P-Clamps: 15  Omega Clamps: 20  Completely Non-Corrosive & Non-Conductive  Improved Strength & Stability  Lighter than Traditional P-Clamps by up to 40%  High temperature resistance  Withstands constant vibrations and shock loads  Over 50 years experience in overmold technology  Silicone or Fluorosilicone Cushion will not come off or slide off  Allows broad range of variances in wire bundle diameters www.amphenolpcd.com email: info@amphenolpcd.com QuickClips More details on back 978-624-3400 Technical Specifications High Performance P-Clamps MATERIALS Clamp Base Overmolding Application Example Securing Wire Bundle Polyetheretherketone (PEEK) per MIL-P-46183 Silicone Rubber per ASTM-D-2000 PERFORMANCE Temperature Limits Flammability Part No. Continuous: - 65°F to 350°F Excursions: up to 500°F UL94, V0; FAR25.853 Size No. Inner cushion diameter (ØD) F Length (L) H T Weight in cm in cm in cm in cm in cm ounces grams PCL150101 101 0.12 0.30 0.59 1.51 1.18 2.99 0.64 1.62 0.18 0.46 0.14 4.08 PCL150102 102 0.22 0.56 0.64 1.63 1.27 3.22 0.71 1.80 0.18 0.46 0.16 4.54 PCL150103 103 0.31 0.79 0.71 1.81 1.41 3.59 0.81 2.06 0.24 0.61 0.22 6.35 PCL150104 104 0.41 1.03 0.76 1.93 1.51 3.83 0.88 2.25 0.24 0.61 0.24 6.80 PCL150105 105 0.50 1.27 0.81 2.05 1.60 4.07 0.96 2.44 0.24 0.61 0.27 7.71 PCL150106 106 0.59 1.51 0.85 2.17 1.70 4.32 1.05 2.68 0.24 0.61 0.29 8.16 PCL150107 107 0.69 1.75 0.93 2.35 1.84 4.67 1.20 3.05 0.30 0.76 0.38 10.89 PCL150108 108 0.78 1.99 0.97 2.47 1.93 4.91 1.32 3.35 0.30 0.76 0.43 12.25 PCL150109 109 0.88 2.22 1.02 2.59 2.03 5.15 1.39 3.53 0.30 0.76 0.45 12.70 PCL150110 110 0.97 2.46 1.07 2.71 2.12 5.38 1.48 3.76 0.30 0.76 0.48 13.61 PCL150111 111 1.06 2.70 1.14 2.89 2.26 5.75 1.62 4.12 0.36 0.91 0.59 16.78 PCL150112 112 1.16 2.94 1.18 3.01 2.36 5.99 1.76 4.47 0.36 0.91 0.64 18.14 PCL150113 113 1.25 3.18 1.23 3.13 2.45 6.23 1.82 4.63 0.36 0.91 0.67 19.05 PCL150114 114 1.34 3.41 1.29 3.28 2.58 6.55 1.93 4.91 0.40 1.00 0.75 21.32 PCL150115 115 1.44 3.65 1.35 3.43 2.69 6.83 2.05 5.20 0.42 1.07 0.85 24.04 Amphenol Pcd www.amphenolpcd.com email: info@amphenolpcd.com 978-624-3400 Technical Specifications High Performance Omega Clamps MATERIALS Application Example Power Feeder Separator Polyetheretherketone (PEEK) Clamp Base per MIL-P-46183 Silicone Rubber per Overmolding ASTM-D-2000 PERFORMANCE Temperature Limits Flammability Continuous: - 65°F to 350°F Excursions: up 500°F UL94, V0; FAR25.853 Part No. Size No. in cm in cm in cm in cm in cm in cm ounces grams PCL250008 PCL250009 PCL250010 08 09 10 0.45 0.51 0.57 1.14 1.30 1.45 0.78 0.81 0.84 1.98 2.06 2.13 2.19 2.25 2.31 5.56 5.72 5.87 0.91 0.97 1.03 2.31 2.46 2.62 0.20 0.20 0.20 0.51 0.51 0.51 1.56 1.62 1.68 3.96 4.11 4.27 0.32 0.34 0.35 9.07 9.53 9.98 PCL250011 11 0.63 1.60 0.89 2.26 2.42 6.15 1.14 2.90 0.25 0.64 1.79 4.55 0.43 12.32 PCL250012 12 0.70 1.78 0.93 2.36 2.49 6.32 1.21 3.07 0.25 0.64 1.86 4.72 0.46 12.94 PCL250013 13 0.77 1.96 0.96 2.44 2.56 6.50 1.28 3.25 0.25 0.64 1.93 4.90 0.48 13.61 PCL250014 14 0.83 2.11 1.00 2.54 2.62 6.65 1.34 3.40 0.25 0.64 1.99 5.05 0.50 14.06 PCL250015 15 0.89 2.26 1.03 2.62 2.68 6.81 1.40 3.56 0.25 0.64 2.05 5.21 0.53 14.95 PCL250016 16 0.95 2.41 1.08 2.74 2.79 7.09 1.51 3.84 0.30 0.76 2.16 5.49 0.67 19.05 PCL250017 17 1.01 2.57 1.11 2.82 2.85 7.24 1.57 3.99 0.30 0.76 2.22 5.64 0.70 19.96 PCL250018 18 1.07 2.72 1.14 2.90 2.91 7.39 1.63 4.14 0.30 0.76 2.28 5.79 0.72 20.41 PCL250019 19 1.13 2.87 1.17 2.97 2.97 7.54 1.69 4.29 0.30 0.76 2.34 5.94 0.75 21.32 PCL250020 20 1.20 3.05 1.22 3.10 3.07 7.80 1.79 4.55 0.33 0.84 2.44 6.20 0.80 22.68 PCL250021 21 1.26 3.20 1.24 3.15 3.10 7.87 1.82 4.62 0.30 0.76 2.47 6.27 0.80 22.68 PCL250022 22 1.33 3.38 1.27 3.23 3.17 8.05 1.89 4.80 0.30 0.76 2.54 6.45 0.82 23.13 PCL250023 23 1.39 3.53 1.30 3.30 3.23 8.20 1.95 4.95 0.30 0.76 2.60 6.60 0.85 24.04 PCL250024 24 1.45 3.68 1.33 3.38 3.29 8.36 2.01 5.11 0.30 0.76 2.66 6.76 0.84 23.80 PCL250025 25 1.51 3.84 1.36 3.45 3.35 8.51 2.07 5.26 0.30 0.76 2.72 6.91 0.90 25.40 PCL250026 26 1.57 3.99 1.39 3.53 3.41 8.66 2.13 5.41 0.30 0.76 2.78 7.06 0.91 25.85 PCL250028 28 1.70 4.32 1.46 3.71 3.57 9.07 2.29 5.82 0.33 0.84 2.91 7.39 1.06 30.16 PCL250032 32 1.95 4.95 1.58 4.02 3.82 9.70 2.54 6.45 0.33 0.84 3.16 8.03 1.17 33.11 Amphenol Pcd Inner cushion diameter (ØD) F Length (L) www.amphenolpcd.com H E C email: info@amphenolpcd.com Weight 978-624-3400 Additional Information Other Products Installation Luminus Series Environmentally sealed  High Performance P-Clamp A locking feature keeps P-Clamp Open Wire bundle is inserted Screw inserted to complete installation Second Locking Feature keeps P-Clamp Closed  Secure, “snap-locking” mechanism  Multiple sizes and configurations Rugged and lightweight Easy to use and maintain Uses standard MIL-C-39029 and Stamped & Formed contacts  Mounting   Stacked Surface Mounting Surface Mounting Standoff Mounting Stacked Standoff Mounting Product Customization High Performance Standoffs The High Performance P-Clamps and Omega Clamps can be customized to your specific requirements.  VICTREX PEEK Polymer  Non-Conductive; Non-Corrosive  Lightweight Options include, but are not limited to:   Fuel and High Temperature Applications Alternative Polymers and Rubbers Available  Specific Diameter Requirements  Accompanying Hardware VICTREX PEEK polymers make Amphenol Pcd High Performance P-Clamps and Omega Clamps not only stronger, but lighter.  QuickClips Lightweight  Customization available  Strong and Durable High performance, superior strength VICTREX PEEK polymer is designed to be chemical, radiation, smoke, and abrasion resistant. Able to withstand temperature as high as 500° F (260° C), VICTREX PEEK enables Amphenol Pcd to deliver High Performance P-Clamps and Omega Clamps that outperform traditional P-Clamps and Saddle Clamps. VICTREX PEEK Polymers provide high-performance, lightweight solutions to a wide variety of markets, including: Amphenol Pcd 72 Cherry Hill Drive Beverly, MA 01915 USA Email: info@amphenolpcd.com Tel: 978-624-3400  Aerospace  Automotive and Transport  Defense  Electronics  Industrial  Semiconductor and Displays  Medical  Industrial  Food Processing For full technical information regarding VICTREX PEEK Polymer visit the Victrex website at www.victrex.com Amphenol Pcd www.amphenolpcd.com CONNECTING PEOPLE & TECHNOLOGY email: info@amphenolpcd.com 978-624-3400 Rev. C: Jan, 2014