PS1-CO-1000-MOD

PS1&PS4-CO-1000-MOD Carbon Monoxide Module Datasheet Small size | Low cost | Long life | Fast response | High accuracy | Low power consumption Quality, Safety, Responsibility Product note The PS1&PS4-CO-1000-MOD series carbon monoxide module is the perfect combination of our sensor with an advanced printed circuit board. SGX Sensortech gas sensors are using a revolutionary 'Solid Polymer Electrolyte' technology that is based on the principle of catalytic reaction. The target gas to be measured generates a very small current, proportional to the gas concentration. Our technology offers a stable, high quality and costeffective manufacturing process. The module is equipped with a standard UART digital output, allowing operation by anyone without knowledge or understanding of the sensor application and the tedious work of calibration. Features • Sleeping function good for low power request IOT applications • Combined with intelligent algorithms, it has stronger adaptability to the environment, more accurate detection, and stable zero point • Good anti-toxicity, no consumption of chemical materials, more than 5 years Life time • New micro circuit design, strong anti-electromagnetic interference ability • Fast response, fast return to zero, plug and play • Independent temperature and humidity digital sensor output • The smallest size and lowest power consumption in the electrochemical field • RoHS Eco-friendly design Application • Early warning and monitoring of domestic environmental fires • Early warning of automobile lithium battery failure (fire) • Security / Fire and Fire Early Warning Monitoring • Industrial and agricultural fuel burning • Natural gas production preparation • Metallurgical electronics industry • Industrial oil depot • Mine © SGX Sensortech 2012-2022 DS-0412-PS1&PS4-CO-1000-MOD, Issue 1, 10-Feb-2022, Page 1/14 SGX Europe Sp. z o.o. T: +48 (0) 32 438 4778 Building 11 Ligocka St. 103, 40-568 Katowice, Poland E: sales.is@sgxsensortech.com www.sgxsensortech.com Cross Sensitivity Gas Formula Test Concentration Sensor Reading Acetylene C 2H 2 1%vol 0ppm Ammonia NH3 50ppm 0ppm Benzene C 6H 6 986.5ppm 0ppm Chlorine CL2 1ppm 0ppm Ethanol C 2H 6O 104.2ppm 0ppm Ethylene oxide C 2H 4O 14.4ppm 0ppm Formaldehyde HCHO 1ppm 0ppm 1000ppm 500ppm Hydrogen H2 Hydrogen cyanide HCN 50ppm 0ppm Hydrogen sulfide H 2S 50ppm 0ppm Isobutene C 4H 8 300ppm 0ppm Methane CH4 3%vol 0ppm CH2CL2 30ppm 0ppm NO2 10ppm 0ppm O3 50ppm 0ppm SO2 10ppm 0ppm Methylene chloride Nitrogen Dioxide Ozone Sulphur Dioxide Note: 1) The above interference factors may be different due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all gases, and the sensor may be sensitive to other gases. Order Informations Part Number Range Resolution Carbon Monoxide Gas Module PS1-CO-1000-MOD 0-1000ppm 0.1ppm Carbon Monoxide Gas Module PS4-CO-1000-MOD 0-1000ppm 0.1ppm 4Pin Cable © SGX Sensortech 2012-2022 Module 4 PIN cable DS-0412-PS1&PS4-CO-1000-MOD, Issue 1, 10-Feb-2022, Page 2/14 SGX Europe Sp. z o.o. T: +48 (0) 32 438 4778 Building 11 Ligocka St. 103, 40-568 Katowice, Poland E: sales.is@sgxsensortech.com www.sgxsensortech.com Specification Principle Solid Polymer Electrochemical Sensing Technology Detec�on of gas Carbon monoxide gas Detec�on Range 0-1000ppm； Resolution: 0.1ppm Lowest Detec�on Limit Full-scale accuracy error Repeatability 1ppm ± 5% F.S