PS10MV50-503A3030-PM

10mm SMD potentiometer PS-10 & PSX-10 MAIN FEATURES – Specifically designed for leadfree reflow soldering processes (excellent performance). – Carbon resistive element. – IP54 protection according to IEC 60529. – Full traceability. – Moisture sensitivity level 1 (PS-10). – Embossed tape according to IEC 60286-3:2007. – Wiper positioned at initial, 50% or fully clockwise. – Also upon request: Self extinguishable plastic UL 94V-0 (PS-10). Long life model for low cost control potentiometer applications. Mechanical detents. Low torque versions. Locating pins for accurate PCB positioning. Shafts and knobs. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Mechanical rotation angle: 235° ± 5° – Value*: 1k – Electrical rotation angle: 220° ± 20° – Tolerance*: ± 30% – Torque: 0.4 to 2 Ncm. (0.6 to 2.7 in-oz) – Stop torque: > 5 Ncm. ( >7 in-oz) – Life*: Up to 10K cycles to 1M – Taper*: Linear – Nominal Power: 0.15W @ 50°C (122°F) – Operating temperature: PSX-10: –25°C + 70°C PS-10: –40°C + 85°C – Residual resistance: – Equivalent Noise Resistance: * Others upon request HOW TO ORDER OPTIONAL EXTRAS PSX10 L V50 - 102 A 3030 - - - - - - Series Code Taper Life Detents Flammability Wiper position PSX10 PS10 V50 V60 A = Lin. E= Long life PAM P1I P1F P1 I= non flammable PM = 50% PF = Final (See note 4) (See note 2) Rotors Value G L M K R 102 = 1k P16 3030 = ± 30% (See note 3) See detent configurations 105 = 1M (1) Rotor “R” not available for PSX-10 (2) V50: without locating pins. V60: with locating pins (3) Others upon request. (4) Standard = 1000 cycles. Long life = 10K cycles. Others upon request. (5) Non flammable plastic material for housing and rotor. (6) www.piher.net B = Bulk (See note 5) Torque Tolerance (See note 1) NOTES Packaging 1 – = Standard L = Low torque (See note 6) HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS PS(X)-10LV50 + DRAWING NUMBER (Max. 16 characters) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. None Rotor colour ......................................................... Black Housing colour...................................................... Black Wiper position ...................................................... Initial Torque ....................................................................... Standard Packing ................................................................. ......................................................................... Life Reel 1000 cycles PS-10 ................................................................... PSX-10 Detents .................................................................. None Dark grey Dark grey Initial Standard Reel 1000 cycles ROTORS M = Hexagonal 2.1 1.6 L = Screwdriver 2 2.2 2.05 0.7 2 2.2 0.8 thru hole K = Cross slot G = Hexagonal R = thru hole thru hole thru hole thru hole Note: wipers are shown positioned at 50% DIMENSIONS (V50 version) 2.5 5.7 10.3 2 2 9.4 5.15 5 10.9 5.75 2.0 5 2 2.5 2.5 2.5 2.5 DIMENSIONS (V60 version - with centering pins) 9.4 2.5 10.3 0.85 9.4 5 5.15 1 5.75 10.9 2.0 2 5.7 1.2 (x2) 5 2 2 2.5 www.piher.net 2.5 2.5 2 2.5 POSITIONING Positioning (Std. Position = CCW) P.M. 50% +20º P.F. INITIA L FINA L PSX-10 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 240ºC 200ºC (*)