PS15NV60-103A3030-PM

15mm SMD potentiometer PS-15 & PSX-15 FEATURES – Specifically designed for leadfree reflow soldering processes (excellent performance). – Carbon resistive element. – IP54 protection according to IEC 60529. – Moisture sensitivity level 1 (PS-15). – Full traceability. – Embossed tape according to IEC 60286-3:2007 – Wiper positioned at initial, 50% or fully clockwise. – Also upon request: Self extinguishable plastic UL 94V-0 (PS-15). Mechanical detents. Locating pins for accurate PCB positioning. Low torque versions. Log/alog and custom tapers. Shafts and knobs. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Mechanical rotation angle: 265° ± 5° – Value*: 1K – Electrical rotation angle: 240° ± 20° – Tolerance*: ± 30% – Torque: 0.5 to 2.5 Ncm. (0.7 to 3.4 in-oz) – Stop torque: > 10 Ncm. ( >14 in-oz) – Mechanical life*: up to 100K cycles to 1M – Taper*: Linear – Nominal Power: 0.25W @ 50°C (122°F) – Operating temperature: PSX-15: –25°C + 70°C PS-15: –40°C + 85°C – Residual resistance: – Equivalent Noise Resistance: * Others: check availability. HOW TO ORDER STANDARD PS15 T Series PS15 PSX15 V50 - 103 OPTIONAL EXTRAS A 3030 - - Mounting Taper Life V50 V60 A = Linear E = Long life - I= non flammable PM = 50% PF = Final C F G N R T 102 = 1k PAI PAM PAF P1I P1F P02 . . . P38 3030 = + 30% 105 = 1M (See note 1) NOTES B = Bulk Torque – = Standard L = Low torque (See note 4) (1) Rotors C and F not available for PSX-15. (2) V50: without locating pins. V60: with locating pins. (3) “E” option for PSX-15 only. Higher life available upon request for both models to be studied case by case. (4) (5) www.piher.net Packaging (See note 5) Detents Tolerance - Wiper position (See note 2) Value - Flammability (See note 3) Rotors - Non flammable plastic material for housing and rotor. 1 HOW TO ORDER CUSTOM DRAWING STANDARD/DEFAULT OPTIONS ................................................................... None ......................................................... Black Rotor colour (Max. 16 digits) PS(X)-15 TV50 + DRAWING NUMBER ................................................................... PSX-15 Detents Housing colour ...................................................... Black This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. Wiper position ...................................................... Initial ................................................................... Standard Torque Packaging ............................................................... Reel Mechanical Life ........................................................ 1K cycles PS-15 None Grey Grey Initial Standard Reel 10K cycles ROTORS (collector side view) 4. 05 05 4. 05 3. 3. 05 Wipers positioned at initial 42.5° 42.5° Wiper position Wiper position N= G= Removable shaft or thumbwheel Removable shaft or thumbwheel Wipers positioned at 50% Ø4.05 Ø4.02 3.52 3.35 1.2 3.05 3.35 54° 23° Ø4.4 Rotor C Rotor F Rotor R Rotor T DIMENSIONS (V50 version) 2.5 3 15 6.5 4.05 2.25 2.5 4.5 A 6.5 3.5 E (final) S (wiper) 7.15 7.5 13.8 15.5 3.05 S A (initial) E 4.5 4.5 4.5 DIMENSIONS (V60 version - with centering pins) 13.7 2.5 15 3 2.25 2.5 4.5 6.5 4.05 7.15 13.8 7.5 15.5 3.05 3.5 6.5 1.20 (x2) 4.5 4.5 www.piher.net 2 4.5 POSITIONING Default position = CCW P.M. 50% +15º P.F. INITIAL CCW FINAL CW PSX-15 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 240ºC 200ºC (*)