PS4-SO2-50

PS1-SO2-50 Sulfur Dioxide sensor Datasheet PS4-SO2-50 SGX Solid Polymer Electrolyte Gas Sensors The SGX series of PS1 and PS4 Electrochemical gas sensors are using a revolutionary ‘Solid Polymer Electrolyte’ technology that is based on the principle of catalytic reaction. The target gas to be measured generates a very small current, proportional to the gas concentration. Our technology offers a stable, high quality and cost-effective manufacturing process. The SGX solid polymer electrolyte gas sensors are available in a very small size, are highly sensitive, do not use power and have very low cross sensitivity from other gases. Quality, Safety, Responsibility SGX Europe Sp. z o.o. T: +48 (0) 32 438 4778 Konduktorska 42 St., 40-155 Katowice, Poland E: sales.is@sgxsensortech.com www.sgxsensortech.com Technical Specifications Performance Sensitivity 20 ± 10 nA / ppm Measurement Range 0 – 50ppm Zero Current ± 2 nA Maximum Overload 100 ppm Response Time Repeatability T50 < 20s, T90 < 60s 1% Lower Detectable Limit (LDL) 1 ppm Linear Range 50 ppm Resolution (16Bit ADC) 0.1ppm PS1-SO2-50 PS4-SO2-50 Features • Small size • High sensitivity Environmental Details Temperature Range Pressure Range Operating Humidity Range Storage Temperature • Wide temperature range -40°C to +55°C • Fast response time 800 to 1200 hPA • No electrolyte leakage 15-95% RH • Low cost at large volumes 0 to 20℃ • Individually calibrated (including test report) Lifetime Details Long-Term Drift Expected Lifetime Zero Drift in Clean Air Storage conditions < 1 %/month > 3 years in air < 0.2 ppm 0-20 °C Storage Life 12 months Warranty 12 months Operation Operating Principle Amperometric, 3-electrode Bias Voltage 0 mV Recommended Load Resistor 100 Ω Warm Up Time < 60 s Housing Housing Material Weight © SGX Sensortech 2012-2022 PPO PS1-SO2-50 < 0.7g PS4-SO2-50 < 6g Key applications • • • • TLV Monitoring Steel Industry Emission Monitoring Oil & Petrochemical Industry Important Notes • All performance is based on conditions at 20°C, 50% RH and 1 atm, flow rate>150qcm/min, using SGX recommended circuitry. • Sensor performance is temperature dependant; please contact SGX for temperature performance other than 20°C. • Do not solder to the connector pins as this may damage the sensor and thereby invalidate the warranty. • Details on recommended connector pins can be found in the Frequently Asked Questions within the Gas Sensor section of the SGX website. DS-0394-PS1&PS4-SO2-50, Issue 1, 27-Jan-2022, Page 1/3 SGX Europe Sp. z o.o. T: +48 (0) 32 438 4778 Konduktorska 42 St., 40-155 Katowice, Poland E: sales.is@sgxsensortech.com www.sgxsensortech.com Dimensions C S R PS1-SO2-50 W R C PS4-SO2-50 Cross Sensitivity Gas Formula Test Concentration Sensor Reading Ammonia NH3 50ppm 0ppm Carbon Dioxide CO2 1000ppm 0ppm Carbon Monoxide CO 50ppm 0ppm Chlorine Cl2 10ppm -1ppm Hydrocarbons (unsaturated) Hydrogen Hydrogen Cyanide / / n.a H2 100ppm 0ppm HCN 10ppm