PS6WV55-104A3030-05-I-PM

6mm SMD potentiometer PS-6 & PSX-6 MAIN FEATURES – Specifically designed for leadfree reflow soldering processes (excellent performance). – Carbon resistive element. – IP54 protection according to IEC 60529. – Moisture sensitivity level 1 (PS-6). – Embossed tape according to IEC 60286-3:2007. – Wiper positioned at initial, 50% or fully clockwise. – Full traceability. – Also upon request: Long life model for low cost control potentiometer applications. Shaft - knob. Self extinguishable plastic UL 94V-0 (PS-6). MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Mechanical rotation angle: 235° ± 5° – Range of values*: 1K to 1.5M – Electrical rotation angle: 200° ± 20° – Torque: 0.2 to 2 Ncm. (0.3 to 2.7 in-oz) – Stop torque: > 4 Ncm. ( >7 in-oz) – Std. tolerance*: 1K 500K 500K 1.5 ± 30% ± 50% – Taper*: Linear – Nominal Power: 0.1W @ 50°C (122°F) – Operating temperature: PSX-6: –25°C + 70°C PS-6: –40°C + 85°C – Residual resistance: * Others upon request HOW TO ORDER Part number examples: PS6KV50-103A3030: PS6 model with K rotor, V50 mounting type, 10K ohm resistive value, linear taper and 30% tolerance. PS6WV40-502A2525-06AZ-PF: PS6 model with inserted knob fig. 6, 5K ohm resisitive value, linear taper, 25% tolerance, color of the knob: blue; wiper positioned at the end of the travel. OPTIONAL EXTRAS PS6 K V50 Series Code PS6 PSX6 V40 V45 V50 V55 Rotors K M W - 102 A 3030 Taper Shaft/knob A = Lin. Value 102 = 1K - - 05 = Fig. 5 06 = Fig. 6 Tolerance Knob/shaft/rotor colour RO = Red NE = Black VE = Green AZ = Blue GR = Grey 5050 = ± 50% Packaging [empty] = initial PM = 50% PF = Final B = Bulk I= non flammable (Non flammable plastic for housing and rotor) All Piher products can be adapted to meet customer´s requirements. 1 - Wiper position Flammability 3030 = ± 30% 504 = 500K www.piher.net - HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS PS(x)-6KV50 + Rotor colour DRAWING NUMBER (Max. 16 characters) ....................................... Black Housing colour ...................................... This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. Black Wiper position ...................................... Initial ........................................ Packaging Reel ................................................ 1000 cycles Life Detents ................................................ None ROTORS ................................................................... PSX-6 PS-6 Grey Grey Initial Reel 1000 cycles None Note: wipers are shown positioned at 50%. W model has an factory-inserted knob. K= Cross slot thru hole M= Hexagonal thru hole 1.4 0.60 1.80 W = with inserted shaft or knob. Default color of the knob: cream. S (wiper) Drawing example, W V40 with knob ref 6: 6.7 (final) E A (initial) 4 1.55 S 8.4 2 6.3 0.3 1.4 4.05 2 5.15 10 3.85 4.35 2.5 2.15 0.25 = = E A 2.15 4.3 0.8 DIMENSIONS - V40 2 4.05 4 1.4 8.4 0.6 1.8 2 6 ,3 0 5.15 10 4.35 2.5 Recommended PCB hole layout = 2.15 2.15 = 4.3 DIMENSIONS - V45 2 0.3 6.3 5.25 0.6 2 .5 2.15 www.piher.net 2.15 2.75 3.8 7.35 1.8 2 1.4 2.5 4 0.25 4.3 2 Recommended PCB hole layout DIMENSIONS - V50 2 4.4 0.7 2.5 8.35 0.6 2.5 4 3.25 1.8 3.6 6.3 2.5 2.5 2.5 Recommended PCB hole layout 2.5 DIMENSIONS - V55 4.4 2 6.3 2 0.6 2 1.8 0.3 2.35 0.7 5.9 2.5 2.5 2.5 0.25 2.5 2.75 2.5 Recommended PCB hole layout POSITIONING Std. Position = CCW 50% ±35° INITIAL CCW FINAL CW PSX-6 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 240ºC 200ºC (*)