PSAS4F3130071TR

SAS/PCIe® 4.0 (U.2&U.3) Connectors HIGH SPEED MULTI-PROTOCOL DESIGN WITH FLEXIBILITIES SAS/PCIe® 4.0 (U.2&U.3) connectors come with 16GT/s (PCIe® lanes) or 24Gb/s (SAS lanes) speeds to meet the demands of next-generation servers. The 68-position, SAS/PCIe® receptacle and header enables implementation of high speed Serial Attached SCSI (SAS) hard disk drive (HDD) interface as well as Peripheral Component Express (PCIe®)-based devices. The molded guide post allows device plug and receptacle to selfalign during mating process. With halogen-free high temperature thermoplastic, these connectors are made to withstand diverse conditions. It also offers a durability of 500 mating cycles. TARGET MARKETS § Compatible with SFF8639 specification § Capable of meeting 24Gb/s SSDs and HDDs or PCle® based devices at 16GT/s § Footprint backward compatible to 12G, 6G and 3G SAS connectors FEATURES BENEFITS § Receptacles are inter-mateable with unshielded dual port § Offers flexibility in component selection SFF8680 (SAS 3.0 or SAS 4.0) connectors § SAS/PCIe® connectors enable SFF8630, SFF8680 and SFF8432 interfaces § Backward compatible with 12Gb/s, 6Gb/s SAS, SATA and 3Gb/s SFF8482 connectors § Implementation of high speed SSDs (Solid State Drives) and HDDs (Hard Disk Drives) allows compatibility between unshielded dual and multiport interfaces § Same interface can be used for cost-effective storage HDDs as well as higher performance server SSDs § Supports up to 4 port 16GT/s PCIe® based devices § Improves performance and faster file transfers § Supports both SAS and SATA drives § Addresses the needs of both mission critical and bulk storage applications § Staggered contact lengths § Provides sequential contact mating for hot plugging § Stamped clips act as connector retainers for robust PCB § Provide additional mechanical strength after soldering attachment § Molded guideposts help mating halves to self-align by § Compensates for connector misalignment providing angled lead-ins www.amphenol-icc.com Amphenol Information Communications and Commercial Products SAS/PCIe® 4.0 (U.2&U.3) Connectors TECHNICAL INFORMATION MATERIAL ENVIRONMENTAL § Contact Base Metal: Copper alloy § Humidity: 96 hours at 40°C with 90-95% § Contact Area Plating: Gold over nickel § Solder Tail Plating: Tin over nickel § Retainer Clip Base Metal: Copper alloy § Retainer Plating: Tin over nickel § Housing: Halogen-free high temperature thermoplastic (UL94V-0), black ELECTRICAL PERFORMANCE § Contact Resistance: 30mΩ max. for signal contacts. Per EIA 364-23 § Current Rating: 1.5A min. per contact with temperature rise not exceeding 30°C (power pins only: P1–P15). Per EIA 364-70B § Insulation Resistance: 1000MΩ min. per EIA 364-21 MECHANICAL PERFORMANCE § Durability: 500 mating cycles § Mating Force: 59N max. relative humidity. Per EIA 364-31, Method II, test condition A § Temperature Life: 85°C for 500 hours. Per EIA 364-17 test condition III, method A § Thermal Shock: 10 cycles between -55°C to +85°C. Per EIA 364-32, test condition I § Mixed Flow Gas: Expose ½ samples unmated for 7 days and then mated for 7 additional days; the other ½ samples are exposed mated for 14 days. Per EIA 364-65, class II Aexposed mated for 14 days. Per EIA 364-65, class II A SPECIFICATIONS § Amphenol Product Specification: SSAS009 PACKAGING § Tape and Reel § Tray TARGET MARKETS/APPLICATIONS § Unmating Force: 6N min. Processor and Storage Blade Mezzanine Card HDD HDD Carrier External Storage System Interposer Card Server Storage Server Processor and Storage Blade www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. SAS/PCIe® 4.0 (U.2&U.3) Connectors PART NUMBERS Note: More options are available upon request. Please contact your local sales representative. SAS/PCIe 4.0 Receptacle Application Orientation Termination Type Retainers U.2 Vertical SMT DIP U.2 Vertical SMT U.2 Right Angle U.2 Height (mm) Mount Type Impedance Others Part Numbers 8.15 Top mount 92Ω Wide base PSAS4F313002XXX DIP 8.15 Top mount 92Ω High durability PSASF313027XXX SMT DIP 2.85 Top mount 92Ω Standard PSAS4F213002XXX Right Angle SMT DIP 2.85 Top mount 92Ω Reverse PSAS4F213001XXX U.2 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313004XXX U.2 Vertical SMT DIP 8.15 Top mount 92Ω - PSAS4F313012XXX U.2 Right Angle Hybrid DIP 1.75 Top mount 92Ω - PSAS4F413001XXX U.2 Vertical SMT Fork-lock 8.15 Top mount 92Ω - PSAS4F313009XXX U.2&U.3 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313001XXX U.2&U.3 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313007XXX U.2&U.3 Vertical SMT DIP 8.15 Top mount 92Ω - PSAS4F313008XXX U.2 Vertical SMT DIP 8.15mm Top Mount 92Ω Wide base PSAS4F313011xxx U.2&U.3 Vertical SMT Fork lock 8.15mm Top Mount 85Ω - PSAS4F313018xxx U.2&U.3 Vertical SMT SMT 8.15mm Top Mount 85Ω - PSAS4F313028xxx U.2 R/A SMT DIP 2.85mm Sink type 92Ω - PSAS4F213004xxx www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. SAS/PCIe® 4.0 (U.2&U.3) Connectors PART NUMBERS Note: More options are available upon request. Please contact your local sales representative. SAS/PCIe 4.0 Header Application Orientation Termination Type Retainers U.2 Vertical SMT SMT U.2 Right Angle SMT U.2 Right Angle U.2&U.3 Height (mm) Mount Type Impedance Others Part Numbers 8.35 Top mount 92Ω - PSAS4M313006XXX SMT 2.55 Sink type 92Ω - PSAS4M213008XXX SMT SMT 4.00 Sink type 92Ω - PSAS4M213002XXX Right Angle SMT SMT 2.55 Sink type 92Ω - PSAS4M213001XXX U.2&U.3 Right Angle SMT SMT Straddle Mount 92Ω U.2 R/A SMT SMT 5.3mm Top mount 85ohm - PSAS4M213018xxx U.2 R/A SMT SMT 2.75mm Top mount 85ohm - PSAS4M213017xxx With SIO pins PSAS4M213012XXX SSIOSASPCIE401219EA4 - www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice.