PSAS5F3130021TR

SAS/PCIe 5.0 (U.2 & U.3) Connectors HIGH SPEED DESIGN WITH FLEXIBILITIES SAS/PCIe 5.0 (U.2 & U.3) connectors comes with 32GT/s (PCIe lanes) and 24Gb/s (SAS lanes) speeds to meet the demands of next-generation servers. The 68-position, SAS/PCIe receptacle and header enables implementation of high speed Serial Attached SCSI (SAS) hard disk drive (HDD) interface as well as Peripheral Component Express (PCIe)-based devices. The molded guide post allows device plug and receptacle to self-align during mating process. With a halogen-free high temperature thermoplastic, these connectors are made to withstand diverse conditions. It also offers a durability of 500 mating cycles. §§Compatible with SFF8639 specification §§Capable of meeting 24Gb/s SSDs and HDDs or PCle based TARGET MARKETS devices at 32GT/s §§Footprint backward compatible to 12G, 6G and 3G SAS connectors FEATURES BENEFITS §§Receptacles are inter-mateable with unshielded dual port §§Offers flexibility in component selection SFF8680 (SAS 3.0/SAS 4.0) connectors §§SAS/PCIe connectors enable SFF8630, SFF8680 and SFF8432 interfaces §§Backward compatible with 12Gb/s, 6Gb/s SAS, SATA and 3Gb/s SFF8482 connectors §§Implementation of high speed SSDs (Solid State Drives) and HDDs (Hard Disk Drives) allows compatibility between unshielded dual and multiport interfaces §§Same interface can be used for cost-effective storage HDDs as well as higher performance server SSDs §§Supports up to 6 port 32GT/s PCIe based devices §§Improves performance and faster file transfers §§Supports both SAS and SATA drives §§Addresses the needs of both mission critical and bulk storage applications §§Staggered contact lengths §§Provides sequential contact mating for hot plugging §§Stamped clips act as connector retainers for robust PCB §§Provide additional mechanical strength after soldering attachment §§Molded guideposts help mating halves to self-align by §§Compensates for connector misalignment providing angled lead-ins www.amphenol-icc.com Amphenol Information Communications and Commercial Products SAS/PCIe 5.0 (U.2 & U.3) Connectors TECHNICAL INFORMATION MATERIAL ENVIRONMENTAL §§ Contact Base Metal: Copper alloy §§ Humidity: 96 hours at 40°C with 90-95% relative humidity. Per EIA 364-31, Method II, test condition A §§ Contact Area Plating: Gold over nickel §§ Temperature Life: 85°C for 500 hours. Per EIA 364-17 test §§ Solder Tail Plating: Tin over nickel condition III, method A §§ Retainer Clip Base Metal: Copper alloy §§ Thermal Shock: 10 cycles between -55°C to +85°C. Per EIA §§ Retainer Plating: Tin over nickel 364-32, test condition I §§ Housing: Halogen-free high temperature §§ Mixed Flow Gas: Expose ½ samples unmated for 7 days thermoplastic (UL94V-0), black and then mated for 7 additional days; the other ½ samples are exposed mated for 14 days. Per EIA 364-65, class II A exposed mated for 14 days. Per EIA 364-65, class II A ELECTRICAL PERFORMANCE §§ Contact Resistance: 30mΩ max. for signal SPECIFICATIONS contacts. Per EIA 364-23 §§ Amphenol Product Specification: S-PSAS-004 §§ Current Rating: 1.5A min. per contact with temperature rise not exceeding 30°C (power pins only: P1–P15). Per EIA 364-70B §§ Insulation Resistance: 1000MΩ min. per EIA 364-21 PACKAGING §§ Tape and Reel §§ Tray MECHANICAL PERFORMANCE TARGET MARKETS/APPLICATIONS §§ Durability: 500 mating cycles Processor and Storage Blade Mezzanine Card §§ Mating Force: 59N max. §§ Unmating Force: 6N min. HDD HDD Carrier External Storage System Interposer Card Server Storage Server Processor and Storage Blade PART NUMBERS SAS/PCIe 5.0 Receptacle Application Orientation Termination Type Retainers Height (mm) Mount Type Impedance Part Numbers cU.2 & U.3 Vertical SMT 8.15 85Ω PSAS5F3130021TR SMT Top mount SAS/PCIe 5.0 Header Application Orientation Termination Type Retainers Height (mm) Mount Type Impedance Part Numbers cU.2 & U.3 Right Angle SMT 4.9 85Ω PSAS5M2130021TR SMT Top mount SSIOSASPCIE500619EA4 Note: More options are available upon request. Please contact your local sales representative. www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice.